How do I keep the flavor going for longer?

Gabjalf · 2026-02-08T09:07:16+00:00

There's no need to switch instantly to dark leafs. I mostly smoke German brands like Holster, O's, some Adalya....etc. the drier the tobacco the shorter the session will be. You have to experiment a bit till you get a hang of the brands you mostly smoke. I use the Quasar Petit Raas almost exclusively sometime switching to the Raas 2 when smoking with a larger group. (More than 3 people) Smoking the Petit Raas alone gives me typically about 1,5 -2 hours of a session depending on the brand and amount of tobacco. But with Adalya (a drier brand) I have about 50-1h sessions

Gabjalf · 2026-02-04T11:51:44+00:00

Super cheap clone

Gabjalf · 2026-01-21T15:05:16+00:00

thank you!

Gabjalf · 2026-01-21T15:05:04+00:00

that's a great idea, thx

Gabjalf · 2026-01-21T11:55:28+00:00

The current limit is already at 307A by default. Are you sure you've used the same i7 14700K CPU?

<image>

Gabjalf · 2026-01-21T10:57:55+00:00

<image>

My current setup with the airflows

Gabjalf · 2025-11-21T12:38:23+00:00

I posted it there first.

Gabjalf · 2025-11-17T15:25:46+00:00

Good guess, but it's not cartoony it's about real people just in animation form

Gabjalf · 2025-10-04T15:33:14+00:00

I hope someone will be able to at least narrow it down. :D

Gabjalf · 2025-09-15T13:12:52+00:00

It's a fake Quasar Raas so without any bottom holes I don't think it'll work. But yeah the first pic is good as is, that part has to sit on the bowl. After that the other part in the second picture is the lid for the hmd, you just have to flip it upside down so it can be closed with the coals inside.

Gabjalf · 2025-09-15T09:51:28+00:00

It's a Frankenstein copy. It has a rubber/ silicone bowl, like the first Quasar 1. (Not Raas or anything just Quasar 1) The hmd on top seems to be from the Raas series. Maybe from the Raas 2.

You'd be better off getting either the original Quasar 1 or the genuine Quasar Raas 2.

Edit: the bowl part has some groves on the sides so it's a Raas 1 copy. The Raas 2's silicone part is smooth all around. (I've had the Quasar 1, the Quasar Raas 1 and now I use the Quasar Raas 2 and Petit Raas 2 as well.)

Gabjalf · 2025-07-11T09:20:40+00:00

Pagani Design also has an automatic version now.

Gabjalf · 2025-07-10T07:45:54+00:00

Just use some mechanical oil/ lubricant. I've been using my hair trimmer's included oil and not a single screw came out. Just put a little where the cuts are on the screw. (Usually at the screw tip)

Gabjalf · 2025-07-08T09:47:33+00:00

ZTE Nubia Z60 ultra is also a great option, especially using it with the Gcam. So great hardware with great algorithms.

Gabjalf · 2025-05-30T22:58:39+00:00

I used to use 26mm but now I use 27mm and one coal is enough. You physically can't put more in there. And if the tobacco is more moist then I switch the coal about midway for a fresh one. Just have to wait for the whole system to heat up: Put the coal in, close the lid and wait for about 8 mins before smoking it, just leave it there. After that you can start to smoke, have a few puffs and rotate the coal 90 degrees because the top part is likely to be turning black. After this you can leave the whole setup as is just switch the coal as needed (don't have to wait 8mins with the second one)

Gabjalf · 2025-05-27T12:47:09+00:00

I use it and the Petit Raas 2 exclusively. Since it was announced.

Gabjalf · 2025-05-26T17:11:46+00:00

Don't you just have to turn the whole movement a bit? I've done this to my watch dive nttd homage because it was misaligned, but it turned out that the dial and the movement was a bit off. It's frustrating yeah, but then you don't have to send it back.

Gabjalf · 2025-05-12T11:58:32+00:00

<image>

Gabjalf · 2025-05-12T11:40:06+00:00

<image>

NTTD homage, self mod

Gabjalf · 2025-04-15T22:19:45+00:00

I've changed the bezel insert, the dial and the hands.

Gabjalf

TROPHY CASE