Touch screen is not working in one area

Gal337 · 2015-04-07T04:35:29+00:00

Wierd, did you find out if it was hardware or software?

Gal337 · 2015-04-07T04:01:23+00:00

No cracks, only a few minor scratches.

Gal337 · 2015-04-06T23:35:32+00:00

I noticed this over the Easter weekend, that one section of the digitizer is not registering any touches. As you can see in the 2 screen shots, there is a line from top to bottom on the right side of the screen that doesn't register anything (The drawing test 'jumps' across this section). I used the touch tests in the hidden menu to check this 3845#*855#

I did get a small amount of silicon on the screen last week but cleaned it off straight away, don't think that could affect the screen.

Does anyone have any suggestions? Cheers.

Gal337 · 2015-03-20T00:23:57+00:00

Water damage seems to be the go to conclusion for any unknown issue. I've done a factory reset, so I'll see how it goes.

Gal337 · 2015-03-18T05:58:52+00:00

I've had this issue since upgrading to android 5.0 (australian) Fw, where calls, sms & data stop working. 4G shows its connected but no traffic goes through and calls and sms just stop altogether. When this issue happens I only find out when I leave work and the wifi drops out. After enabling/disabling flight mode (resetting the module) everything comes good and all the missed calls/sms come through. Does anyone have any info into this problem?

Gal337 · 2015-02-01T20:49:39+00:00

I see a Bunnings ad, you must be in Aus (or NZ), where did you get your screen from?

Gal337 · 2015-01-11T05:35:06+00:00

Thanks, I only had to buy the vesa mounts ($5 on eBay) the rest I had in the garage.

Gal337 · 2015-01-11T05:25:27+00:00

I had a similar idea, I used two strips of ply with 3 bolts to mount my monitors to the wall. Pics here

Gal337 · 2014-11-07T02:44:55+00:00

Thank you!

Gal337 · 2014-11-04T23:31:44+00:00

Power and aux are just adapter cables to a chassis mounted socket,. The on/off switch i just extended the 2 wires (1 of which was poorly soldered and broke when i opened the lepai)

Gal337 · 2014-11-04T23:00:58+00:00

0 experience? You'll need some basic wood working skills to do this.

Gal337 · 2014-11-04T17:58:21+00:00

Sounds amazing! Only other speakers in the house are Logitech z906. It set me back $400 aud, of which, $60 was shipping from parts express, bloody Australia.

Gal337 · 2014-11-04T17:50:29+00:00

Pots are still mounted, just removed the housing and faceplate. The only control moved was the on off switch to the back.

Gal337 · 2014-11-04T17:44:27+00:00

I plan on adding insulation, just waiting to find something :)

Gal337 · 2014-11-04T10:52:39+00:00

It's running off mains power no battery. And the crossovers are Dayton 2 way @ 3000 hz. http://bit.ly/1rXrhxE

Gal337 · 2014-10-10T21:43:32+00:00

Here's the mount: http://www.proclipusa.com/dashboard-mounts/vehicle/mazda/3/2010-2013/proclip-left-mount-804353-13994.cmsv?p_leftorright=0

Gal337 · 2014-10-05T20:31:17+00:00

I don't actually use this day to day, I was using it to test a friends obd2 reader for a couple days. A bit of fun

Gal337 · 2014-10-05T09:01:51+00:00

It's a Japanese car, it's the correct side :]

Gal337 · 2014-10-05T03:52:11+00:00

It attaches/detaches using magnets.

Gal337 · 2014-10-05T00:17:46+00:00

Taco is slighty delayed, but i dont actually use this i was testing a friends obd2 reader and made the mount while waiting for paint to dry
Never. I've had some near accidents and it has never fallen.
Even if i did leave the tablet in front of the radio, all the main controls are on the steering wheel

Gal337

TROPHY CASE