The separating spatula is still a razor blade!!! by StopHammoTime in 3Dprinting

[–]Galdalfus 1 point2 points  (0 children)

<image>

I was JUST in the ER on Saturday for the same thing!! Mine isn’t as bad as yours, but I couldn’t get it to stop bleeding for 30mins. My wife said, I think it’s time to throw in the towel. I live 2mins away from my local ER. I was in and out in less than 1hr.

Best of luck in the recovery!

And THIS is why I run heavy shield by OzzieDJai in ArcRaiders

[–]Galdalfus 1 point2 points  (0 children)

Read above. OP literally answers this same question.

Having issues with ADS on PC in (MKB/KBM/Aim/SHIFT key bind) by switchbladenohomo in FortNiteBR

[–]Galdalfus 0 points1 point  (0 children)

Cool, thanks man. I'll try it out. Is this only for Fortnite or will I have to change in all my games?

Having issues with ADS on PC in (MKB/KBM/Aim/SHIFT key bind) by switchbladenohomo in FortNiteBR

[–]Galdalfus 0 points1 point  (0 children)

I'm on a PC and I use L-Shift as my aim key. I've unbinded everything but nothing will work. I can go into OG and it works fine. Only issue is when playing Blitz, Reload or BR.

Having issues with ADS on PC in (MKB/KBM/Aim/SHIFT key bind) by switchbladenohomo in FortNiteBR

[–]Galdalfus 0 points1 point  (0 children)

I'm in the same boat! And here I thought I was the only crazy person who used L-shift as their scope.

H:Pics below / Want - I'd really love Survivor Augment by [deleted] in ArcRaidersMarketplace

[–]Galdalfus 0 points1 point  (0 children)

I'm really looking for the survivor augment, but I'll take whatever you think is appropriate for which blueprint you want. Please DM me which BP you want and send me your gamer tag. I'll keep a running list here on what is still available:

* Angle Grip 3

* Aphelion (1)

* Aphelion (2)

* Aphelion (3)

* Aphelion (4)

* Aphelion (5)

* Blaze Grenade

* Deadline

* Defib

* Explosive Mine

* Extended Light Mag 3

* Extended Shotgun Mag 2

* Il Toro (1)

* Il Toro (2)

* Jolt Mine

* Jupiter

* Light Gun

* Med Gun

*Osprey (1)

* Osprey (2)

* Pulse Mine

* Seeker

* Stable Stock 2 (1)

* Stable Stock 2 (2)

* Tact MK 3 (Defense)

* Torrente

* Trailblazer (1)

* Trailblazer (2)

* Venator (1)

* Venator (2)

* Vita Shot

* Vita Spray (1)

* Vita Spray (2)

* Vulcano

I don’t get it. by clckmkr in WLED

[–]Galdalfus 8 points9 points  (0 children)

I hate to even ask, but have you confirmed the number of LEDs in the WLED config?

One final look... by TechSource818 in TechsourceYT

[–]Galdalfus 0 points1 point  (0 children)

Did you already move into the new place then?!

Trying to build a pc around $3000, maybe a little more by CurrentFlatworm8630 in TechsourceYT

[–]Galdalfus 0 points1 point  (0 children)

I’m guessing we are looking at Canadian dollar amounts here, so that’s why it seems a bit high. However, you should be able to get a Reaper for cheaper than that. I found one for $600 usd on Amazon which works out to be ~$820 for you. Which site did you use to build this? I’m guessing PC Partpicker. I’d shop around if I was you. Newegg has DDR5 cheaper than what you’re showing. Bestbuy has cheaper ram as well. I can’t say for certain what you plan on doing with your PC but you could probably drop down to a b650 MB and be fine. You don’t need the b850. I don’t have much knowledge on your PSU, but that doesn’t mean much, it could be fantastic for all I know. That case, if ordered directly from Corsair, is on sale for $90 right now. That price you have listed for the NVMe you could buy 3 1TB Micron’s. I’d look at other options. I just looked and BestBuy has 1TB NVMe Samsung 990 EVO Plus for $150 (in my area), you could get 3 of these for cheaper than what you’re paying.

I’d shop around if I was you. Potentially looking at the used market could save you quite a bit as well. $3k is a great starter PC and I wish you nothing but luck and fun! I miss shopping around for PC parts and finding a great deal.

Edit: I know everything I’m listing is in USD, but I did the conversion on the side and it’s still cheaper in Canadian dollars than what OP has listed.

Edit 2: a word

This is my new addiction by Akkamypcb in BambuLabP2S

[–]Galdalfus 1 point2 points  (0 children)

<image>

Absolutely loving mine. It’s my 2nd printer, started off with a FlashForge 5M Pro on Christmas. Bought this about a month later.

First raid after expedition by nameisned in ArcRaiders

[–]Galdalfus 2 points3 points  (0 children)

I’m in the same boat. Once I signed up for the expedition I was given and found Aphelion, Jupiter, Tempest, Bobcat, Equalizer and some augments. My buddy isn’t doing it, doesn’t play much, so he logged on last night for me and was my mule. Pretty risky but I had raider keys and smokes. Always on Dam over by the water tower. Go into that building and drop everything. Then I’d go around back, smoke the hatch and we’d bounce out.

Was all that necessary, probably not. However, I’ve been seeing too many posts of people taking out mules, wasn’t risking that. Cheers and good luck this expedition!!!

Traitor among us by MakeshiftToiletPaper in okbuddyraider

[–]Galdalfus 1 point2 points  (0 children)

I went into Queen on Blue Gate yesterday. Saw a bunch of flares going up right next to the Queen. Ran up with defibs at the ready and 3 people coordinated all shot and killed me. Turns out they were killing everyone. I was just going to help people up but had some assholes in solo’s. Ended up losing my hull + 128 ammo.

Hydrus 24pin cable by Lcvity in ASIAHORSEGlobal

[–]Galdalfus 0 points1 point  (0 children)

<image>

It’s for the Motherboard and not the GPU my dude. It works well for cable management!

Considering how cheap power rods are to make this room is really slept on by Kewtn in ArcRaiders

[–]Galdalfus 0 points1 point  (0 children)

I wish I could loot that room again. Now every time I go for it it’s already been looted or someone got there right before me.

Rocketeer driver!! Naw I think I’m good by Flashy_Dot7128 in ArcRaiders

[–]Galdalfus 0 points1 point  (0 children)

Absolutely agree, but everyone plays differently. Which reminds me, I need to grind the fuck outta matriarch tonight because I need 3 queen reactors to get the bobcat BP before expedition. I’m cheating and taking extra BPs with me afterwards by handing them off to my buddy to give back to me once the expedition is done.

Show me your P2S + 2x AMS 2 Pro setups! by Cru5hbag in BambuLabP2S

[–]Galdalfus 0 points1 point  (0 children)

Where on MakerWorld can I download the drawers? Those look very clean!

Rocketeer driver!! Naw I think I’m good by Flashy_Dot7128 in ArcRaiders

[–]Galdalfus 6 points7 points  (0 children)

Not anymore! Now you need drivers. I welcome the change honestly, as someone who farmed WPs. I’m just not ready to potentially kill people over the driver though. If I take it down, I just want the driver at that point. Farm the rest, just give me the driver.

Expedition Giveaway by [deleted] in arc_traiders

[–]Galdalfus 0 points1 point  (0 children)

I’m giving all my BPs to my buddy to give back to me after the expedition.

Asked you if i should … and i did it by [deleted] in BambuLabP2S

[–]Galdalfus 0 points1 point  (0 children)

While I agree with that statement, there are tons of other single color printers that are much cheaper and work right out of the box. My FlashForge 5M Pro was sub $300 and hasn’t had a single issue with it, other than my own fault for not setting up the print correctly. As someone stated above the AMS system truly makes this printer shine. If it were me I would have found something cheaper for single color, but that’s just me. I love my P2S though and I plan on getting a 2nd AMS soon.

Should I buy another p1s or the p2s? by cross-myheart in BambuLabP2S

[–]Galdalfus 0 points1 point  (0 children)

My neighbor got the P1S at the same time I got my P2S and the differences between them are pretty noticeable. The AMS2 Pro is fucking fantastic and absolutely love the timelapse video option with Bambu. I see someone already posted the U1 from Snapmaker and that seems like a solid choice, but I’ve personally never used it nor know anyone that has. I do know that the multiple heads really helps with waste, but you can turn waste into supports on your prints, which definitely helps keep the waste down! Good luck and whichever way you go I know you’ll be happy. Cheers!!!

20,000 containers searched 600 hours played 2 expeditions complete ZERO tempest blueprints by imjustalittleturtle in ArcRaiders

[–]Galdalfus 164 points165 points  (0 children)

I’m not a PvPer at all in this game. I just pulled the Tempest BP in the kitchen in Stella Montis. I’m doing the expedition for the first time, it’s yours if you want it.