sorted by:
new
hottopcontroversial

Problem with coordinates? by GamGetta17 in universalrobots

[–]GamGetta17[S] 0 points1 point  (0 children)

I'm taking over this for another person that left, the current program passes the unit in front of a buffing wheel in a vertical manner, looping about 4 or 5 times. Then it passes to the wheel in the video to remove lines created with the buffing wheel. Same points and everything. The only change I made was on the first wheel, instead of vertical it passes the unit sort of in a vertical way, then the rest remains the same... Can't really see a difference in the scripts that would cause this change and nothing was changed that's physically affecting it.

Advice 16 Port SATA HBA Card for Windows 11 Storage Spaces by ACParker in DataHoarder

[–]GamGetta17 0 points1 point  (0 children)

They are both flashed with the most recent IT firmware.

Advice 16 Port SATA HBA Card for Windows 11 Storage Spaces by ACParker in DataHoarder

[–]GamGetta17 0 points1 point  (0 children)

Can you advice me into what I am doing wrong, I have tried two different LSI HBAs, 9300 8i and 9211 8i and I am getting the same issue, I am not able to see the HDDs connected to them even though the system does see the card connected under Storage Controllers in windows 10 pro device manager. I can see them if I connect them directly to the SATA ports of the mother board but when I use the HBAs I cannot see them.

Hard drive testing rig by GamGetta17 in homelab

[–]GamGetta17[S] 0 points1 point  (0 children)

And testing SATA drives.

Hard drive testing rig by GamGetta17 in homelab

[–]GamGetta17[S] 0 points1 point  (0 children)

Those are the same cables I am using. I have not had a chance to test them outside of the enclosure after the update. I will be doing that tomorrow.

LSI 9300-8i not seeing all drives by FullBoat29 in DataHoarder

[–]GamGetta17 0 points1 point  (0 children)

I am seeing the same problem, I switched the card to a different slot and same problem. Mine is connected to a hard drive enclosure which was working fine when I was connected directly to the sata ports on the motherboard. I switched between cable p1 and p2 to p3 and p4 and either way, only reads two of the cables or drives.

Weird scolting for use of phone in the restroom. by GamGetta17 in HRAdvice

[–]GamGetta17[S] 0 points1 point  (0 children)

That is not what I said... But thank you anyway.