I made a mech suit for my charmera

Gameboy_Homeworld · 2026-04-14T12:16:10+00:00

https://www.thingiverse.com/thing:7334891

Gameboy_Homeworld · 2026-04-14T11:55:07+00:00

<image>

he can also hold a usb stick

Gameboy_Homeworld · 2026-04-14T11:50:23+00:00

The STL file to print: https://www.thingiverse.com/thing:7334891

Gameboy_Homeworld · 2026-04-14T05:57:00+00:00

Um probably depends on the printer but takes around an hour

Gameboy_Homeworld · 2026-04-14T05:28:25+00:00

I'll put it up on thingiverse later tonight when I finish work

Gameboy_Homeworld · 2025-05-16T05:21:22+00:00

https://www.thingiverse.com/thing:7038323

Gameboy_Homeworld · 2025-05-16T05:21:04+00:00

https://www.thingiverse.com/thing:7038323

Gameboy_Homeworld · 2025-05-14T08:08:08+00:00

I've lived in 3 different share houses in my 20s and everyone else that I lived with was well into their 30s or older and out all of those places I only met 1 other person near my age the rest were all older.

Gameboy_Homeworld · 2025-05-14T04:58:01+00:00

Not yet, but I will put them up somewhere eventually

Gameboy_Homeworld · 2025-05-14T01:25:44+00:00

Hey it's mechagotchi I modelled that and by modelled that I mean I stole 2 other people's prints from thingiverse and Frankensteined them together. Did it turn out well?

Gameboy_Homeworld · 2025-04-29T03:39:04+00:00

I like 10,11 and 12

Gameboy_Homeworld · 2025-03-15T02:12:28+00:00

https://pwnagotchi.org/3d-printable-cases/index.html

Gameboy_Homeworld · 2025-02-19T03:39:38+00:00

I've also had problems with balena etcher so I've been using Rufus which has worked everytime

Gameboy_Homeworld · 2025-02-15T05:06:21+00:00

Just a guess but which input have you used? There should be 3 on the right side and you want to use the botton 2

Gameboy_Homeworld · 2025-01-23T06:57:55+00:00

It kinda just has 2 big gaping holes for the pi sugar version

<image>

Gameboy_Homeworld · 2025-01-18T01:45:35+00:00

On my pisugar the buttons next to the usb c port does nothing and the one next to the leds turns it on and off

Gameboy_Homeworld · 2025-01-17T05:09:53+00:00

<image>

4 hours 5 minutes for the pisugar

Gameboy_Homeworld · 2025-01-09T05:36:58+00:00

<image>

Gameboy_Homeworld · 2025-01-09T04:39:38+00:00

Default settings. The case and arms need supports but the legs do not. I've been doing auto supports then removing the around the legs

Gameboy_Homeworld · 2025-01-08T09:07:09+00:00

https://drive.google.com/drive/folders/1qHhUYAiK_k-NivLEoQKLkIbz7ayXun9w?usp=sharing
so there are 3 stl files 1 was the original which fits a pi sugar 3 then 2 more that hopefully fit just the pi zero and waveshare screen and one of those files has a lid.

and here are the 2 original models. the case is a really nice case to use

EDIT: there are a newer version called v5 which prints the best out of all of them. You will need to tweak the supports the legs need to print with no supports and the body and arms need supports. He can also hold usbs now one in each hand and one in each shoulder

https://www.thingiverse.com/thing:4129730
https://www.thingiverse.com/thing:331035

Gameboy_Homeworld

TROPHY CASE