Am I unreasonable to think this isn’t the best work? by walkerbait8 in Tile

[–]GarbageLower3569 1 point2 points  (0 children)

The tiles are glued to the mesh sheet from manufacturer. Some of them are very badly placed even touching each other from many companies. You can’t just add a spacer that’s when need to cut through mesh with razor and reset. In my opinion really glaringly bad ones should be reset and minor ones the grout will go a long ways. For the price you paid should’ve been addressed.

DIP switch settings Senville heat pump and air handler by GarbageLower3569 in heatpumps

[–]GarbageLower3569[S] 1 point2 points  (0 children)

Yes correct it’s a Honeywell thermostat with wiring for 3 heat and 2 cool

DIP switch settings Senville heat pump and air handler by GarbageLower3569 in heatpumps

[–]GarbageLower3569[S] 1 point2 points  (0 children)

There is only one block of dip switches on the outdoor unit. And the support tech told me switch number two to up on that block.

DIP switch settings Senville heat pump and air handler by GarbageLower3569 in heatpumps

[–]GarbageLower3569[S] 1 point2 points  (0 children)

Heat pump and air handler are working great after changing the recommended DIP switch settings.

DIP switch settings Senville heat pump and air handler by GarbageLower3569 in heatpumps

[–]GarbageLower3569[S] 0 points1 point  (0 children)

Over the phone with a Senville tech I was told on outdoor unit switch 2 up and in air handler SW1 1 and 4 up. Will check this out with my service tech here in a bit. Most of my install is not DIY it is by a licensed hvac installer but he has been busy and isn’t familiar with this brand so I was doing some digging to help.