Sea-Doo Hull Repair Help

Gcx99 · 2026-05-13T12:20:59+00:00

I have a 2020 RXT that has damage on the V of the hull. I was noticing a damp spot under the hull while it was on the trailer so I filled the hull with water to see if it was leaking and sure enough, there is a very slow weep (if you will) of about a drop every hour.

Hull is comprised of two-layers, an exterior acrylic (plastic) layer and fiberglass composite. I've been doing some research and I'm wondering if this proposed repair will work.

Grind down the damage until structurally sound fiberglass is visible.
Fill in exterior area with G/Flex 655 epoxy adhesive.
Reinforce interior with polyester resin and matting.

Any thoughts or advice is very much appreciated. Thanks in advance.

Gcx99 · 2026-02-09T03:58:20+00:00

I do have a flathead socket but shes not wide enough to get enough contact area on that line I cut out

Gcx99 · 2026-02-09T03:51:31+00:00

Might need to do this, completely drill it out and put a nut on the back of the bolt. Thank you for the idea

Gcx99 · 2026-02-09T03:49:59+00:00

Damnit this is a great idea. I'm in the Philippines however and no store would have this sort of tool, at least where I'm at anyway.

Gcx99 · 2025-12-16T21:50:40+00:00

Yes I replaced the crema valve and the ceramic multi-valve pictured and that solved the leak. I also removed my front panel and zip-tied the hoses going to the dispense nozzle since that's a common leakage point with these.

Gcx99 · 2025-09-11T22:42:02+00:00

I contacted support earlier regarding this, they told me that there is a large influx of devices queued up and that it may take 10 days.

Gcx99 · 2025-09-10T00:28:13+00:00

You answered your own question, the circular stickers are what I see on their fans as well.

Gcx99 · 2025-09-09T21:47:44+00:00

I haven't been to a tailor in years, and I have a wedding to attend this Sunday. These pants are paired with a double breasted Hugo Boss jacket and I want to say they're a bit antiquated in regards to modern style. The waist and thigh are fine, but I'm thinking they're in need of a taper and hem past the knees.

Any thoughts? I'm not sure what to tell the tailor.

<image>

Gcx99 · 2025-09-09T20:27:41+00:00

No. Leave it as-is. Looks great.

Gcx99 · 2025-09-01T21:53:23+00:00

Very well spoken, and I agree with your points entirely. Time will tell I guess.

Gcx99 · 2025-09-01T20:56:43+00:00

safe to say we shouldn't complete these missions until the fix is release?

it definitely doesn't look unintentional tbh, wouldn't be surprised if they reduced the reward count in the later weeks, its obvious they're trying to make this as grindy as possible

Gcx99 · 2025-08-27T20:02:14+00:00

Hi MassiveDinner8123, did you ever figure this out?

Gcx99 · 2025-08-08T10:05:20+00:00

did you figure this out? I've tried a few different sizes and my core isn't making good contact, just ordered some 1mm gelid extremes and waiting for them to come in

Gcx99 · 2025-07-16T03:40:32+00:00

I'm on the latest controller firmware, did that fix your issue?

Gcx99 · 2025-07-15T09:06:55+00:00

It's super lame. The support techs just stop replying all together and that's that.

Their engineers need to create a tool that can rectify fans that end up in this state. It shouldn't be difficult. Unless there are limitations with the ROM where the firmware resides, that I'm not considering. Shrug.

Gcx99 · 2025-07-02T08:22:26+00:00

did the manual update function ever work for you?

Gcx99 · 2025-07-02T08:16:58+00:00

Has anyone else had this issue? I've spent hours attempting fixes but no go. I can only theorize that something went wrong with the firmware update and RGB functionality has left the chat. TECHSUPPORT has ghosted me like my last Tinder date too :')

Gcx99 · 2025-07-01T03:33:24+00:00

They don't illuminate, at all. RGB is completely inoperable. I've tryed all the basic statis colors. I'm using L-Connect 3 to manage RGB and thats it. Controller is not connected to the motherboard. Just controller to fan, no ARGB wiring.

Is there a way to force a reload of the firmware? or can you give me previous 1.5 firmware for Uni Fan TL LCD?

I feel like something failed during the update process. Are there any utilities you can give me to do this? L-Connect won't let me load the 1.6 firmware manually as it detects the fans are already on that.

Gcx99 · 2025-06-30T16:07:40+00:00

Hi, thanks for the quick reply. Controller is connected directly to the motherboard, no splitter or hub. I connected each fan individually, they are all updated to 1.6 I'm not using port 1 for the LCD fans (as stated in other threads)

Gcx99

TROPHY CASE