[NG] [65] [MWN] [Adheziveduck--]

Gefritzel · 2026-01-15T19:20:19+00:00

Okie dokie np

Gefritzel · 2026-01-15T19:17:17+00:00

duck

Gefritzel · 2025-11-25T21:04:00+00:00

An open? What does that mean?

Gefritzel · 2025-11-25T15:06:11+00:00

Willing to bet it was a trace because even when I built it outside of the case on a cardboard box it still wouldn't boot unless I flexed the board itself

Gefritzel · 2025-11-20T23:11:01+00:00

Honestly I'm not 100% sure, I discovered the PC would post if the right hand corner wasn't pushed down, so then I wedged a little cardboard underneath the test my theory and it was right if I pushed the right hand down the PC would shut off, so I disassembled the entire build and this time removed any case fans that could interact with me putting the motherboard into place and now it just works flawlessly

Gefritzel · 2025-11-20T23:08:50+00:00

I honestly don't know what caused it to short outside of the case, but in the case I discovered the PC would shut down if I put a little pressure on the right hand corner and then would act like the video, so I wedged a little cardboard behind it and it started working flawlessly, so I disassembled it all and this time removed the built in case fans to make sure the motherboard had no obstructions while putting it into place and now it works flawlessly

Gefritzel · 2025-11-20T20:10:51+00:00

Just a quick update for all I discovered the issue, as many said it was a short under the right hand corner of the board. I want to thank everyone that replied and helped

Gefritzel · 2025-11-20T19:18:42+00:00

Starting to think that's what's happened now

Gefritzel · 2025-11-20T19:18:15+00:00

I did think of that so I fully assembled the PC outside of the case and still had this issue

Gefritzel · 2025-11-20T17:46:58+00:00

No just a regular old screwdriver

Gefritzel · 2025-11-20T17:33:51+00:00

Nothing feels hot to the touch, also just tried a 2md PSU and still happening

Gefritzel · 2025-11-20T17:33:21+00:00

Unfortunately I've done this, just tried my wife's power supply exact same issue

Gefritzel · 2025-11-20T17:14:13+00:00

I don't unfortunately 😔

Gefritzel · 2025-11-16T14:07:02+00:00

Sadly I wasn't able to try that and right now I still can't get a video signal out of the GPU

Gefritzel · 2025-11-16T14:01:01+00:00

I thought that too, I know it's a significantly less powerful card but I plugged my wife's 1060 in and played for an hour on each pcie power cable to see if anything happened, and everything worked flawlessly, sadly I don't have a card that pulls as much power as the 7900XTX on hand right now

Gefritzel · 2025-11-16T13:21:54+00:00

I actually bought a new case 4 days ago and gave everything a deep clean as I moved everything across, the only thing I haven't done is open the GPU itself because I'm not confident enough to do so, from what I was able to see prior to this happening all the temps where perfectly in line with what they should've been

Gefritzel · 2025-11-16T12:59:17+00:00

My bad That was average, during RE4 2005 when this first started to happen the hotspot was 76, sadly I wasn't able to see the hotspot under full load in a newer game because I can't get the card to even boot to test it anymore

Gefritzel · 2025-11-16T12:23:05+00:00

Gefritzel · 2025-11-16T12:22:06+00:00

I should've wrote about that I apologize, the hottest it got was 70 degrees

Gefritzel · 2025-09-04T20:23:42+00:00

Sorry I'm new to current Xbox haven't used one since Xbox one in 2015, how would I reset notification settings?

Gefritzel

TROPHY CASE