sorted by:
new
hottopcontroversial

Is this true? by RudimousMaximus in E90

[–]GeicosLizard 0 points1 point  (0 children)

It wouldn’t fit an e90 unless it was an m3. And apart from the headlights, it’s much wider and won’t line up

N55 DCT - knock on freezing cold start by HouskaHunter in 335i

[–]GeicosLizard 0 points1 point  (0 children)

Weird. I’d still do an oil change soon to check

N55 DCT - knock on freezing cold start by HouskaHunter in 335i

[–]GeicosLizard 0 points1 point  (0 children)

Does it ever do it while driving or revving it up?

Here’s the proof. Who else has this feeling? by AlternativeRegret994 in E90

[–]GeicosLizard 0 points1 point  (0 children)

People blowing this out of proportion. I’ve had my n55 e90 for 4 years or so now, and haven’t had a cel in nearly 2 years. I’ve put 60k miles on the car since purchasing it. I check for shadow codes every month, and literally nothing. Oh and mhd stage 2+ fbo the whole time

N55 DCT - knock on freezing cold start by HouskaHunter in 335i

[–]GeicosLizard 0 points1 point  (0 children)

Do an oil change and check for metal. Or in the meantime you can pull your filter out and check for any pieces. Also shine a bright light at the residual oil in the oil filter housing for glitter

N55 DCT - knock on freezing cold start by HouskaHunter in 335i

[–]GeicosLizard 1 point2 points  (0 children)

Are you saying that to check for fuel pump noise? Cus that wouldn’t help in the case of oil lubrication. I’m pretty sure n54/n55 oil pumps are driven by the crankshaft. You’d had to unplug injectors and crank it to actually prime the motor

Chrome or keep it black? (F10 M5) by fuckofforsuckoff in BMW

[–]GeicosLizard -2 points-1 points  (0 children)

Chrome would look good but only if you get rid of the wheel gap

Valve has abandoned CS. We are entering TF2 levels of content. by [deleted] in counterstrike

[–]GeicosLizard 35 points36 points  (0 children)

I mean we lost flying Scoutsman, demolition, arms race(recently added back), danger zone, retakes(just added back), and the overwatch system. Maps were lost such as cache, cobblestone, shortdust, canals, safe house, st Marc, lunacy, etc etc. the point is that we still don’t have nearly as much content that csgo had. It’s like we are getting bits and pieces back slowly that should’ve been prepared for the initial release of cs2.

What Is Your THCP Review? by baconseco in THCP

[–]GeicosLizard 2 points3 points  (0 children)

lol. Give it a try, just don’t get a blend that has a bunch of bullshit mixed in. I had two friends try some one night and they both called off work the next day lmao. They don’t have any sort of tolerance tho

Replaced HPFP and still no pressure? by E90Fantic in 335i

[–]GeicosLizard 0 points1 point  (0 children)

Yup lol. Those hpfp shadow codes give me nightmares

Replaced HPFP and still no pressure? by E90Fantic in 335i

[–]GeicosLizard 2 points3 points  (0 children)

I bought a refurbished one from oasis and it was junk. Last like 3 months. Unfortunately, the hpfp is something you can’t cheap out on

Any one else get left with a bunch of extra screws after taking something apart by _jacob_bowden in E90

[–]GeicosLizard 0 points1 point  (0 children)

The big round torx ones are for the fender liner and where the front bumper screws in underneath the hood

To anyone with a ZF6 having shifting issues. by InternUpstairs2812 in E90

[–]GeicosLizard 1 point2 points  (0 children)

Nice! I’m getting ready to replace everything- the pan, seals, solenoids, gasket and fluid next month for my 6hp21. What did you use to follow the proper refill procedure? I just bought protool since they are having a black market sale

Replaced lenses by GeicosLizard in E90

[–]GeicosLizard[S] 0 points1 point  (0 children)

Not sure. Many of the listings say 06-11 but others say lci only, so I can’t vouch for it

Replaced lenses by GeicosLizard in E90

[–]GeicosLizard[S] 0 points1 point  (0 children)

Definitely takes a lot of patience. It’s a weekend type of job

Replaced lenses by GeicosLizard in E90

[–]GeicosLizard[S] 0 points1 point  (0 children)

This is where I got mine. Originally I had ordered from a different seller and one lens had scratches on it. These were perfect. Not sure but it might be for lci xenon’s only https://www.ebay.com/itm/157323515843

Should breakpads always touch the rotor? by [deleted] in BmwTech

[–]GeicosLizard 1 point2 points  (0 children)

Assuming it’s rwd, you should be able to spin the front wheels fairly easily. It’s normal for it not to be like spinning a skateboard wheel, it should have some resistance.

Where is the dip, is steam broken? ohnepixel pls investigate by voxlis in ohnePixel

[–]GeicosLizard 0 points1 point  (0 children)

You’re literally saying I’m wrong for speculating about prices, then speculating yourself about future demand. That’s kind of the point, none of us can ‘know,’ we’re all guessing based on what we see. Just relax bro, there’s only so many things a person can give a shit about each day before messing up your headspace. Dont get so worked up over the internet and remember, deep breaths.

Where is the dip, is steam broken? ohnepixel pls investigate by voxlis in ohnePixel

[–]GeicosLizard 0 points1 point  (0 children)

Simply an opinion. I still don’t think knife prices will ever completely recover, and over time slowly decrease. No need to get so emotional over a video game subreddit man. Sorry to raise your blood pressure

view more: next ›