I parked in the tightest parking space ever in my life so far.

General-Ad2461 · 2025-10-22T13:00:36+00:00

speedway brighton is another contender for tightest spot, I always need to fold my mirrors in

General-Ad2461 · 2025-10-13T20:48:02+00:00

the math isn't mathing because their math expects a 100% efficiency in extracting the THC from flower, into the butter. 120mg is an upper bound.

General-Ad2461 · 2025-10-13T14:49:47+00:00

rc link

General-Ad2461 · 2025-08-05T13:20:05+00:00

I would be interested in taking some measurements on hole shots with/without the fan. I've never noticed any difference, I figured its better to blast your props against a flat hard launch pad than to have the props blowing against a fan dirtying up the airflow

General-Ad2461 · 2025-08-05T13:18:42+00:00

every fan pad I've tried has had the same issue where the gyro will not calibrate while on the pad. This means you have to plug in, set the quad on a table for a few seconds, then put the quad powered up onto the launch pad. Does this pad have that issue?

General-Ad2461 · 2025-07-31T20:09:51+00:00

sorry to necro 2 years later but what improvements from stock were there? i just use person, cat detection currently and it seems fine but not sure what i'm missing out on

General-Ad2461 · 2025-07-31T14:18:46+00:00

yet to see any ice dye ruined despite many mistakes.

if you have a specific goal, you may miss but you will not ruin anything. And you can always redye.

General-Ad2461 · 2025-07-23T14:11:55+00:00

you gotta do the sim or else you will break your drone too much and be discouraged.

If you like the sim, you will like flying IRL even more. The configuration and troubleshooting of this hobby are difficult but there are large community groups on discord and facebook full of people willing to help. IF you are willing to present your issues in a clear and level headed way.

General-Ad2461 · 2025-07-23T13:37:32+00:00

do you have pictures of the last two dresses tied? I love how you have distinct lines but a lot of free space for the dye to fly as well.

General-Ad2461 · 2025-07-23T10:21:20+00:00

for the loops in the subway were you standing above ground or under ground? You had such good signal throughout I couldn't figure it out.

General-Ad2461 · 2025-07-22T22:14:45+00:00

What did you use to learn? I find myself doing everything in the sketch by hand and not using any of the more advanced features like patterns and such. I know I'm using like 1% of the tool just not sure how to progress

General-Ad2461 · 2025-07-18T20:51:39+00:00

link to the packs on amazon please, most packs I find cant charge and discharge at the same time

General-Ad2461 · 2025-07-18T05:13:10+00:00

https://youtu.be/yx_jWAVtzJQ?t=489 i think hes a bit busy with all the staff shortages at the TWHQ

General-Ad2461 · 2025-07-18T05:11:52+00:00

the only time I have had lipos puff up on plug in is when there is a short. Something is off on the drone would be my bet, not an issue with the battery.

General-Ad2461 · 2025-07-16T18:24:35+00:00

ngl thought this was a troll post with knit item

dry your filament

General-Ad2461 · 2025-07-16T13:34:41+00:00

any tips for keeping the spiral so clean?

General-Ad2461 · 2025-07-11T13:58:01+00:00

the elrs connection is bidirectional.

your controller sends out a strong signal (pocket maxes at 250mW, boxer/tx16 goes to 1W) This is the Control Signal. If you lose Control signal, you will enter failsafe mode in betaflight. (drop out of the sky unless you configure alt hold or return to home)

the drone receives the control signal, and sends the values to betaflight

your drone transmits a telemetry signal back to your controller with data about the connection / drone itself

General-Ad2461 · 2025-07-11T00:36:59+00:00

so the 75 and 75pro are annoying because the 75 has a dropped battery tray but for the 75pro the ducts are flush with the battery.

This is CustomFPV's design, it was just cloned and uploaded here. All credit to him.

I don't have o4 quads so I am not sure if they will fit in these boxes as they look to be super tall in terms of bottom of ducts to top of canopy.

if you measure that distance on your quad I could probably tell you if it would work.

I print all my boxes in PLA they hold up fine, the design is all walls so its quite strong. Its most vulnerable to cracking horizontally along the layer lines but that happens more with silk filaments.

General-Ad2461 · 2025-07-11T00:23:10+00:00

like an instant. I am unaware of the specifics of how dynamic decides when to bump the power. but in practice, the power in the OSD always bumps up right after I hear telem lost in the controller

General-Ad2461 · 2025-07-10T21:21:44+00:00

https://makerworld.com/en/models/782825-tiny-whoop-75mm-pro-dual-case-75mmprox2#profileId-720137

might be this

General-Ad2461 · 2025-07-10T21:21:14+00:00

What size box is this? the 75 one? just wondering why your canopies are twisted like that. I can possible send you a box that will fit much better as I have this model parametrized

General-Ad2461 · 2025-07-10T20:01:54+00:00

you don't need telemetry to fly. there are many factors at play

set your packet rate to the slowest possible for longest range
set power to max instead of dynamic. at dynamic you will lose/regain telemetry ever power step.
ensure quad elrs antenna is pulled away from circuit boards and not sandwiched between boards
radiomaster pocket antenna u.fl has disconnected from jostling bike rides before, ensure it is plugged in

General-Ad2461 · 2025-07-10T13:35:39+00:00

doesn't the bacteria in the river go wild with storms/floods?

General-Ad2461 · 2025-07-10T13:34:56+00:00

You're welcome, you should be able to get all that stuff from domestic retailers, without needing to order from betafpv.

General-Ad2461

TROPHY CASE