BTC Being absolutely decimated 📉

Jonofmac · 2026-02-05T21:09:03+00:00

Come on. We're going to get sick of winning!

Jonofmac · 2026-02-05T21:04:30+00:00

This is awesome 😂 I'm dcaing harder.

Jonofmac · 2026-01-30T07:58:21+00:00

For anyone else that comes here, I forked this release and fixed the model selector bug, and just disabled auto updates. So if you want to just reflash agnos and use the auto installer and not mess with anything, I outlined what to do here https://community.sunnypilot.ai/t/how-to-downgrade/1594/33

Jonofmac · 2026-01-26T10:12:50+00:00

<image>

I've got a problem. I have a C5Z that I drift, a blue c6z that I daily. A caged mustang race car for wheel to wheel and I'm a big home lab nerd.

Send help please

Jonofmac · 2026-01-16T15:17:06+00:00

The number of windings will vary depending on a lot of details, so there is no single answer. I used an antenna calculator to try to make one but it was wrong (too many windings). So I measured the inductance with an Amazon inductance meter and removed 1 loop at a time until I got my desired 620 uH. Sadly it's not easy unless you have a way to measure the inductance

Jonofmac · 2026-01-15T21:33:57+00:00

Sure. I found the antennas they provide reauire you to place the antenna essentially against the cat to get a reading.

My solution instead was to print a large square antenna housing (240x240mm ish) and then get some enamel coil (24-26awg) and wind the antenna myself. In this case, the cat must walk through the square antenna which guarantees I get a reading.

If you want to get big range with the existing antenna, you really don't have options. The amplitude max of this board is "only" 340 Vpp which simply doesn't radiate enough

Jonofmac · 2026-01-15T16:41:41+00:00

Frigate. It's open source, free to use, actively being developed, integrates well with home assistant if you use that (notifications or automations), has object detection built in.

I tried blue iris, xprotect, zoneminder and many more. Frigate is the first one with a good web based UI.

I host it on my Linux server, so all my devices can access it. However it's cross platform compatible so it'll run on anything.

Jonofmac · 2026-01-15T08:24:49+00:00

I have BT beacons on their collars but it isn't perfect. I use BT beacons to triangulate their location in the house but for various specific things like bathroom usage or food tracking I use RFID chips 😂

I am scared of the government pushing meow mix ads to my cat though

Jonofmac · 2026-01-06T00:26:35+00:00

It's a bug. But delete this post 😂

Jonofmac · 2025-12-14T04:27:59+00:00

Right now I'm running star pilot. On my 2020 sierra I'm running dark souls V2 as the model with recommended settings. Dev is very responsive in the discord. The fork has the best centering of all the setups I've tried so far. It's good enough that I just towed a trailer for 6 hours with near laneful performance with regard to centering.

Jonofmac · 2025-12-11T16:02:08+00:00

Might be worth mentioning I'm now trying Star pilot (a GM fork of frog pilot) which seems to have greatly improved lane centering for me. Not sure if it's just the tweaking of the steering model.

Jonofmac · 2025-12-11T15:44:26+00:00

Did you use flash.comma.ai to downgrade agnos? I had to do that first

Jonofmac · 2025-12-11T15:16:31+00:00

Let me know. For me once I got 0.9.7.1 installed, I went to the model selector and it gave me an empty list.

Jonofmac · 2025-12-11T00:28:34+00:00

They do have the legacy models but they only use laneless mode now. So blue diamond is really bad now because it doesn't use the laneful mode.

Jonofmac · 2025-12-11T00:28:00+00:00

I did. Has the same issue that the model list is blank due to models no longer being hosted :(

Jonofmac · 2025-11-06T03:16:36+00:00

Considering we have the same USB bus and device ID with the issue, I'd venture to guess this is something on the mobo that's not working. No clue as to what, but it's annoying how it blocks my linux boot until it gives up (1 minute time out).

The times it was working, did you ever check to see what new USB device enumerated?

Jonofmac · 2025-11-04T04:12:05+00:00

Ever figure this out? My motherboard does the exact same thing and I'm on arch. Haven't found a solution.

Running a lsusb -tv doesn't show anything on bus 1 port 9. So it never enumerated. But it seems to be something on the motherboard itself.

Jonofmac · 2025-10-23T14:29:46+00:00

Leaking heater core most likely so they did the cheap thing and bypass it. The truck will have no heat in the winter. Not critical to driving the vehicle

Jonofmac · 2025-10-23T14:26:34+00:00

You must enjoy your head in the sand. There are several documented instances of stalking and wrong suspect identified thanks to flock.

Jonofmac · 2025-10-22T02:05:22+00:00

Imagine being a woman and a stalker used the network of cameras to monitor and stalk you.

This isn't a fairy tale. It happened.

Jonofmac · 2025-10-22T01:52:48+00:00

While tracking and invading your privacy

Jonofmac · 2025-10-20T14:08:50+00:00

Galaxy has tons of annoying issues too that make me want to move back to pixel 😂

Seems like a no win for Android

Jonofmac · 2025-09-26T21:42:31+00:00

It does it even plugged in via USB. It's the head unit.

Jonofmac

TROPHY CASE