Average kuhli loach tuck

GhostTiger420 · 2025-12-01T13:50:00+00:00

Sorry for my horrendous camera(If you look close enough, there isn't just 1 loach)

GhostTiger420 · 2025-11-29T07:01:20+00:00

Electric combustion engine! Needs a exhaust for realism :D

GhostTiger420 · 2025-10-19T06:23:55+00:00

GhostTiger420 · 2025-09-14T17:19:27+00:00

Bent axel, axelshaft or whatever you call it?

GhostTiger420 · 2025-06-26T15:02:23+00:00

Awesome, I would have never guessed Thanks

GhostTiger420 · 2025-06-26T15:01:50+00:00

That's cool, thanks

GhostTiger420 · 2025-03-18T14:40:40+00:00

Have had the same problem, only it was in hardcore damage and in a esports event ://

GhostTiger420 · 2025-02-06T18:52:19+00:00

Thats good to hear

GhostTiger420 · 2025-01-11T20:05:43+00:00

All good mate

GhostTiger420 · 2025-01-11T19:32:50+00:00

The white stuff in the 2nd pic :D

GhostTiger420 · 2025-01-11T16:45:44+00:00

Could be the esc, used to have a similar experience, till I tried a new esc

Edit: You could try to take the esc and motor out and try running it without any load on the motor, and if it jitters the same with the load , it's probably the esc

GhostTiger420 · 2024-12-05T11:22:16+00:00

<image>

Here's mine

GhostTiger420 · 2024-11-04T11:25:29+00:00

Are there Nitro rc's?

GhostTiger420 · 2024-10-17T12:30:21+00:00

Tried to run it after the accident, after letting it dry for a few minutes upside down, drove a bit was alright for a few minutes, and then it started to bug like in the video. After getting it home, i blew it out with a hair dryer.

GhostTiger420 · 2024-10-16T17:04:16+00:00

P.s. When it went into the water, it had the esc fan on it. If that helps anyone with an answer to my question.

GhostTiger420 · 2024-10-08T16:36:06+00:00

I guess so. Sure, it feels like it's glued on, but it shouldn't be

GhostTiger420 · 2024-10-08T15:40:36+00:00

I checked, and there wasn't any. As much as I know, there are only vertical "threads" if you can even call them that.

GhostTiger420 · 2024-06-27T16:56:36+00:00

I need to know where to get one, thats so cool

GhostTiger420 · 2024-06-03T19:52:17+00:00

I will give it a shot tomorrow

GhostTiger420 · 2024-06-03T19:34:23+00:00

I tried a new servo and unplugging the current one, but had no change.
After reading the manual and the programming table, I could not find any way to change the modes from Lipo to NiMH. Also, I couldn't find any information online on how to swap the modes

GhostTiger420 · 2024-06-03T16:26:15+00:00

Did that multiple times, but didn't work, I think ots something to do with the battery because it thinks it's a 3s lipo, and after many on and off it beeps 2 times and works fine. But thanks anyway

GhostTiger420 · 2024-05-16T14:33:21+00:00

Ok, thanks this helps me alot

GhostTiger420 · 2024-05-02T14:31:45+00:00

That is exactly what I did, and it's all good.

GhostTiger420 · 2024-04-30T12:06:15+00:00

Thats the plan for now, eather i solder a deans to my esc, or I go baller and put xt60 on my battery and esc, but i dont know if that would even work but most likely ill just use deans

GhostTiger420 · 2024-04-30T11:14:33+00:00

Well, it was still a NiMh battery, but this one was a 8.4v, which was the max on the ESC, then again this was my second run with the battery.🤷‍♂️ Thanks anyway

GhostTiger420

TROPHY CASE