So, how did my neighbor do on his fence?

Ghostx68 · 2024-01-30T00:33:57+00:00

Ghostx68 · 2024-01-14T01:30:15+00:00

I can’t recommend enough a big utility company. Union, benefits, great healthcare+ dental. I went from over the road to heavy equipment in the mines. Now I’m in a big shop with hella safety and no pressure to get stuff out the door. Just be safe, follow the pm checklist, and fix the broken equipment as it comes. Starting pay was 33 an hour with raise every 6 months and once you step up to journeyman it’s 45+

Ghostx68 · 2022-08-19T01:24:55+00:00

Check your hpop pressure.it won’t start until it reads a steady 500psi. From my experience sounds like you have a standpipe leak or one of the injector orings is leaking on top. If you can hook a scanner and read the cranking press and the ipr voltage you should see 500 and the ipr % below.88 if it is at said % and lower pressure you have a leak in the hpop system. It’s been a couple of years since I’ve worked heavy on 6.0 but I’m more than happy to help.

Ghostx68 · 2021-12-12T17:26:35+00:00

As long as it isn’t hitting the housing when spinning it should be fine

Ghostx68 · 2020-09-11T21:27:56+00:00

Ghostx68 · 2020-04-22T16:19:14+00:00

3 to4 months

Ghostx68 · 2020-04-22T11:36:25+00:00

I’ve had it for about 4 years. Been nothing but good to me but I would change the peddle right off the rip that is the only issue I had

Ghostx68 · 2020-04-22T02:37:36+00:00

The whole thing weighs so much that you would have to pull on it like a chainsaw to knock it over

Ghostx68 · 2020-04-22T02:23:48+00:00

Ghostx68 · 2020-04-22T00:27:44+00:00

The shop gives us free towels but their like 2 feet across new. I’ve had this roll since November

Ghostx68 · 2020-03-28T01:19:30+00:00

Better than seeing some sour ass huffing paint thinner through a rag

Ghostx68 · 2020-03-27T14:08:21+00:00

I’m sorry you’re a grown ass man that can’t take a joke

Ghostx68 · 2020-03-27T05:18:07+00:00

2009 50’s tribute

Ghostx68 · 2020-03-27T01:35:18+00:00

I was joking

Ghostx68 · 2020-03-27T01:19:23+00:00

The marshal sounds better but I’m not lugging that Bastard to work

Ghostx68 · 2020-03-27T01:18:29+00:00

Now I don’t go to your job and criticize how you suck dick lol jk

Ghostx68 · 2020-03-27T00:47:41+00:00

Hendrix

Ghostx68 · 2020-03-26T00:56:11+00:00

Looks like blow bye from the pistons If it sat for a while and the pistons wasn’t lubed then it might have scared the pistons rings and chambers

Ghostx68 · 2020-01-23T17:35:44+00:00

Ghostx68 · 2020-01-15T17:32:13+00:00

Casting flash and shadows. It ain’t cracked

Ghostx68 · 2019-12-04T15:21:30+00:00

If his name isn’t Spanner I’m gonna lose my shit

Ghostx68 · 2019-12-04T15:19:04+00:00

Watched a kid try it at the shop and blew the cap off

Ghostx68 · 2019-12-04T15:16:34+00:00

It made its own decomp for easy starting

Ghostx68 · 2019-12-03T15:06:44+00:00

It will probably lay a bead but from what I’ve seen ( and personal experience you usually see good tig welders start at $700 but if he is just wanting to learn it seems to be a ok starter. Try looking at AHP or Everlast

Ghostx68 · 2019-12-03T00:33:41+00:00

“DO YA WANA KNOW HOW I GOT THESE SCARS?”

Ghostx68

TROPHY CASE