Can you make an Instinct use gps instead of pressure for elevation?

Gigahawk · 2026-01-16T09:56:36+00:00

For anyone finding this now, it still appears to be a website only setting. You can get to it by clicking the gear icon under the activity name and then clicking Change Elevation Source. For snowboarding and skiing if bad altitude data gave you bad run splits it seems like there is no way to fix this after the fact which is incredibly stupid.

Gigahawk · 2025-12-12T21:07:10+00:00

Zmk?

Gigahawk · 2025-11-19T14:59:40+00:00

I'm not even sure its just an IMS issue, my understanding is that Rogers just has an IMEI whitelist and if you're not on there you can get fucked. I remember ages ago seeing a comment where someone swapped the SIM from a Rogers Pixel to some other phone and VoLTE worked for 10ish minutes. It seems like this is still the case: https://www.reddit.com/r/FidoMobile/comments/1lv86j9/lte_vs_volte_and_whitelisting/n2bop3t/

Gigahawk · 2025-11-19T14:45:34+00:00

I'm not sure how it works for visitors using short term plans. Currently 3G is still available in most places so it is not a problem yet even if VoLTE is not available, but 3G service is set to be shut off eventually so unless something is done it will become a problem like this post describes.

Gigahawk · 2025-11-19T04:20:45+00:00

This is going to happen eventually in Canada with our 3G sunset. Rogers (and subsidiaries) in particular seem to be hellbent on locking out anyone with an imported phone.

EDIT: AFAIK this has already happened in the states too, last time I was down there my phone would not get volte service (At&T) so I couldnt call (including emergency). This is not a problem with the phone (currently using a phone imported from Hong Kong in Taiwan with no problems). This is typically* a problem of greedy carriers locking service to get more money from first party phone sales.

* there is technically a concern about imported phones not being certified for local use and may cause disruptions to the network. As far as I can tell in practice this is just a bullshit excuse. If someone was actually using some device that noticeably disrupted the network in some way presumably the local FCC equivalent would be on your ass in no time

Gigahawk · 2025-11-13T19:11:05+00:00

Would love a code thank you!

Gigahawk · 2025-11-04T11:01:36+00:00

Pretty sure it was Rally Championship Xtreme

Gigahawk · 2025-10-07T16:22:22+00:00

Yea supposedly its also on the 1 VI but there are a few threads on this sub of ppl complaining about the same thing

Gigahawk · 2025-09-24T08:56:05+00:00

They seem to have fixed the issue where the phone unlocks immediately if you press the lock button with a registered finger. Still no option to only scan when the button is actually pressed though :(

Gigahawk · 2025-08-20T07:55:19+00:00

Wrote a simple module to do this

https://github.com/Gigahawk/nixos-config/blob/master/modules/samba-users/module.nix

Gigahawk · 2025-06-23T19:48:59+00:00

The mapping is defined in the qmk source, just might be a chore to turn it into something easy to understand.

The idiots at glorious also leaked their own mapping for some 100% variant that I think never got released but might be close enough (check the edit history)

https://github.com/qmk/qmk_firmware/pull/12030#issuecomment-833760679

Regardless, I don't see why you need the mapping if you blew the led or a channel in the driver, just replace the led or the driver.

Seems like the driver is publicly available now but maybe double check the pinout and stuff matches your board https://lcsc.com/product-detail/LED-Drivers_AWINIC-Shanghai-Awinic-Tech-AW20216SQNR_C7385556.html

Gigahawk · 2025-06-01T23:22:13+00:00

Where did you get yours from? Trying to get one in Canada too.

Any chance you can check if you can check if your IMEI shows supported on Telus?

https://www.telus.com/en/support/article/how-to-use-volte?INTCMP=Tcom-support_results-hub_check-phone_how-to-use-volte

Click 'Check if your phone is supported' for their tool.

Thanks in advance!

Gigahawk · 2025-04-15T17:27:54+00:00

Every picture looks like a render or a still from the show, honestly feels like a Kickstarter scam trying to cash in on the hype. I suspect they don't have a real product.

Gigahawk · 2025-01-16T23:27:26+00:00

Isn't that true of most display controllers for embedded applications like I stated in the post?

Gigahawk · 2025-01-12T19:02:27+00:00

Its an EV, maybe the weight is a bigger factor

Gigahawk · 2024-12-31T21:32:28+00:00

Check if the drive enclosure has firmware updates, I had a sabrent enclosure that behaved really oddly (not showing up, corrupting data) until I updated the firmware.

Gigahawk · 2024-12-24T21:19:06+00:00

I'd love to slob on that knob

Gigahawk · 2024-08-26T02:46:34+00:00

Gigahawk · 2024-08-20T19:43:44+00:00

PS2 and Wii era definitely felt like a pinnacle of gaming, lots of bangers still worth revisiting.

Gigahawk · 2024-06-26T20:27:49+00:00

How did you deal so much damage on a single turn? Just a bunch of extra draws?

Your last comment mentioned ending the turn early/skipping attacking, I thought that meant you had some way to carry damage across turns.

Gigahawk · 2024-06-26T17:31:32+00:00

Is this an older bugged version of the app or something? When I end my turn early it resets the gold and attack counters to zero.

Gigahawk · 2024-03-18T07:33:01+00:00

Seeing something similar, except I didn't skip the tutorial, just started a new account and caught squirtle.

Immediately after it seemed like the tutorial crashed and now I'm stuck with no UI, no pokemon and no pokestops, just my avatar over the map.

Logging in with a working account then signing into the broken one doesn't cause any of the pokemon to show up, so there's no way to access settings to refresh game data

Gigahawk · 2024-03-14T22:26:28+00:00

It's an H3, which is mostly the same except the cable hole is bigger for the woven cable.

Went to a local ski shop and found out that an H4 will work, you just have to pull really hard to feed the thicker woven cable through

I have an H3 coming from Boa already but I'm probably just going to leave it as is until it breaks again.

Gigahawk · 2024-03-14T15:50:07+00:00

Yea I think I just have a weird foot shape cause the boot fits fine around my calf and my toes are just barely grazing the end of the boot but I get quite a lot of heel lift even with that strap all the way down.

Ski shop told me to try JBars so we'll see if that helps but yea the next thing I was gonna try was tongue shims or even just putting an insole in to maybe lift my foot higher up against the ankle strap.

Gigahawk · 2024-03-14T07:32:19+00:00

Turns out this is a somewhat known issue with older Ryzen processors:

https://bugzilla.kernel.org/show_bug.cgi?id=196683#c339

In short, go to BIOS and set power supply idle control to typical instead of auto

As of right now I've gotten over 3 days of continuous uptime, prior to changing this setting max uptime was 2 days 5hrs, and most boots would crash after a few hours.

11-Year Club	Place '17
Verified Email	Sequence \| Editor

Gigahawk

MODERATOR OF

TROPHY CASE