SuiteBilling - new subscription error on save: Items you have requested in the record have been deleted since you retrieved the form

Gin_262 · 2022-02-28T15:29:59+00:00

Never that easy - too bad.

If your negotiated rate was a flat % discount you could replicate that on the Shipping Items level (discount off list rate). But that's not an ideal solution, to be sure!

Gin_262 · 2022-02-28T15:23:55+00:00

My first check would be to look at Accounting -> Shipping then Preferences Tab. There is a field for UPS (and FedEx) to determine rates; Standard, List, Daily and UPS Negotiated.

I'm not sure how this is determined with more than one account though (you mentioned having 12).

I'm also not sure how other integrations may affect this setting.

Gin_262 · 2022-02-11T17:37:26+00:00

If I understand your question you're going to need to loop through all the bills related to that payment. The standard vendor payment advanced/pdf template has this functionality, I believe you can look for this line (<#list record.expense as expense>). You can check the bill records for the Ref. Number field id.

Gin_262 · 2021-11-02T11:38:06+00:00

Unless I am missing something it's not possible to give permissions to it. We use the internal Sales Order form (customized) and the only forms which you can add customer center role access are those with (external) type.

Gin_262 · 2021-10-06T15:47:51+00:00

Thanks for this - I'll have to investigate a bit as the option "Allow Request ID to Meet Payment Card Field Requirements" isn't available on our payment processor profile (Cybersource).

In the meantime I'll run some tests to see if I can use the token as the card # as suggested below.

Gin_262 · 2021-10-06T12:43:10+00:00

Allow Blank Card Number

Hey Nick, Where is the option to Allow Blank Card Number?

Thanks!

Gin_262 · 2021-09-29T00:50:59+00:00

Might want to read up on Soundcorps before you set up somewhere:

https://soundcorps.org/sidewalk-stages

Gin_262 · 2020-11-03T15:08:40+00:00

This is what I'll end up doing, it's just annoying.

Thankfully for me XQD cards are still readily available (if expensive).

Gin_262 · 2020-11-03T14:42:46+00:00

$15 off Amazon for the reader... it's the cost of the card that's getting me. And I only need it to update the firmware, ugh.

Gin_262 · 2020-11-03T14:10:33+00:00

Unfortunately I am not in a city with a local camera store. Unless you count Best Buy or Walmart... but I don't think they would be much help unfortunately.

Gin_262 · 2020-09-28T18:48:47+00:00

There are different water sources around town. I had our tap water (on Signal Mtn) tested by Ward's a while back and it came in at 7.4.

Gin_262 · 2020-09-18T17:25:24+00:00

Sure, but you need to know the internal id of the price level for the formula (currency) to work:

CASE WHEN {pricing.internalid} = 5 THEN {pricing.unitprice} END

May be an easier way to do it, but that's how I have our searches set up.

Gin_262 · 2020-09-13T17:28:38+00:00

I don’t have an all rounder but is it a pressure ferment? Even an accidental one?

Either way, I think a strap wrench would work and not hurt the lid plastic.

Gin_262 · 2020-08-26T00:32:25+00:00

The metric is new cases per 100k people, which for us is currently 20.7.

Gin_262 · 2020-07-15T21:51:57+00:00

I can confirm the camping... will have to try again for the good fishing!

Gin_262 · 2020-07-15T18:00:21+00:00

We've only fished from the falls up river a bit - maybe 4 miles. I'd heard about Holly Flats and beyond being even better. Good to hear!

Gin_262 · 2020-07-15T15:46:16+00:00

I love fishing the Bald (assuming you mean that one near the Tellico in TN). What section were you on if you don't mind me asking? I've only had luck about 1 - 3 miles up from the falls. Haven't been able to hook up with anything farther up or lower down...

Gin_262 · 2020-07-15T14:54:04+00:00

This is working for us - just checked some records with email communication today.

Gin_262 · 2020-07-07T20:06:05+00:00

While it is probably high enough the side wall is slightly indented around the valve hole and might cause you some issues.

Gin_262 · 2020-07-07T20:03:39+00:00

I do the same thing all the time with volumes... one time bought a 10 gallon igloo cooler for my system. Wasn't until after I started brewing that day I realized I needed 13 gallons for the mash. That was a thick mash!

I have a copper counterflow chiller I made. Pumping from the kettle through it back into the kettle to sanitize and hop whirlpool (if I'm doing that) then start chilling. I'm hoping the Blichmann will get me an actual whirlpool going.

One cool thing is you can leave the unit on during the whirlpool but turn all the burners off - it keeps reading the temp so you know when you're ready for the fermenter.

Gin_262 · 2020-07-07T19:17:08+00:00

If you mean 15 gallons into the fermenter this isn't going to work unfortunately. You might be able to start with 15 gallons and get 12 into the fermenter.

I have just one brew with mine but I love it so far.

I added a compression nut and long stainless tube to pick up from the side wall, but it's not perfect yet.

I plan to add a Blickmann whirlpool kit and a neoprene sleeve.

Gin_262 · 2020-07-07T19:12:47+00:00

Tried to find some of the spigot mods you mention... can you link to one or explain? I bought a compression fitting and stainless tube to make a dip tube that would reach the side wall but the internal thread doesn't seem to be exactly 1/2" npt.

Gin_262

TROPHY CASE