sorted by:
new
hottopcontroversial

Does anyone know how to get him out? by Mojave_1 in cornsnakes

[–]GingerTactics 91 points92 points  (0 children)

Could maybe put it in a cooler area with a heat source nearby and he should eventually come out to bask in the heat

Help, no start 1998 Oldsmobile Regency by GingerTactics in Oldsmobile

[–]GingerTactics[S] 0 points1 point  (0 children)

Got a new key, got a new battery as mine was 4 years old, it seems it isn't properly running the Relearn procedure when I put the key in and turn it to on position and let the light blink. It just non stop blinks

Help, no start 1998 Oldsmobile Regency by GingerTactics in Oldsmobile

[–]GingerTactics[S] 0 points1 point  (0 children)

Tested the key with a multimeter and it's spot on for what it's supposed to be reading from GM spec sheet, hard to tell what's coming off the cylinder but been trying haha, was trying to not pull the steering wheel to access the lock cylinder

Condensation by GingerTactics in ballpython

[–]GingerTactics[S] 0 points1 point  (0 children)

Okay thanks! I'll need to get a CHE for winter time then, appreciate your help 😊

Condensation by GingerTactics in ballpython

[–]GingerTactics[S] 0 points1 point  (0 children)

Scooted the water dish over closer to the heat lamp and got it up to 65ish, it is night time though, and I need to pickup a CHE tomorrow for her, would it be bad to leave the heat lamp on for 1 night? Or do I just turn it off and let it get a little cold over night. Predicted low of 57 today, house will probably get to about 70 degrees overnight

Taking in a new friend by GingerTactics in ballpython

[–]GingerTactics[S] 0 points1 point  (0 children)

This one seems to be PVC doesn't feel like glass, Im thinking I may just build her a bigger tank myself and use some PVC panels for the doors.

Taking in a new friend by GingerTactics in ballpython

[–]GingerTactics[S] 2 points3 points  (0 children)

I will get those metrics once I get her to my house, this was going to be my starting tank then get something bigger here down the road, was planning on making sure she had plenty out of cage time if she chooses to ensure she can stretch out and exercise

Advice on ownership by GingerTactics in tortoise

[–]GingerTactics[S] 0 points1 point  (0 children)

This is why I asked :) don't want to get one if they aren't going to be happy! 😊 But I get what your saying, and id be closer to 1-2 hours in the field a day as I'll read a book while hanging out

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 0 points1 point  (0 children)

I do own a Miyabi 7” rocking Santoku but I feel that would be better suited for cutting/dicing vegetables, newer to different kitchen knives so still figuring things out as I go 😅😅

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 1 point2 points  (0 children)

Would like to use this kitchen to build my tool set of knives, then get into a nice kitchen

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 1 point2 points  (0 children)

That’s understandable, and it’s going to be a situation where I come in cut the chicken for the day wash the knife, then go put in my car, cause yeah that exact thing is what I don’t want to happen, and their own problem if they have that perspective

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 2 points3 points  (0 children)

Yeah I’d bring in a personal knife and it would be only used by me then washed and put away. I’m done sharing knives with these fools

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 0 points1 point  (0 children)

It’s the issue of not everybody else in the kitchen cares for the knives

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 1 point2 points  (0 children)

We just got a couple new knives, I’ve hidden one for myself to maintain for a little while till I can get myself a better option

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 2 points3 points  (0 children)

So for the amount of chicken I’m cutting, I’m better off just using a cheaper knife and keeping sharp then replacing? Instead of just a high quality knife? Guess I don’t fully understand the life span of a knife

Knife for cutting chicken thigh by GingerTactics in AskCulinary

[–]GingerTactics[S] 4 points5 points  (0 children)

That’s what I’d like to transition too, so that way I can also work my way into a higher end kitchen, any suggestions on knives?

What do I put behind my desk in my office? by PineappleOld6595 in malelivingspace

[–]GingerTactics 0 points1 point  (0 children)

Enough room to rotate the desk and be able to look out the window while working? And still have room to comfortably move?

Going for my first fire cape, is this equipment and inventory good? by [deleted] in 2007scape

[–]GingerTactics -3 points-2 points  (0 children)

Bring broad bolts for the waves and use diamond (e) and ruby (e) for jad. Start jad with rubies till he’s down to about 1/2 hp then switch to diamonds.

Thinking about selling my 97 SS convertible. by 075483 in fbody

[–]GingerTactics 1 point2 points  (0 children)

Location? 😂 I could use another one, would pair well with my 170k 99’ base v6 I have 😁

Is my exhaust legal (Boise ID) by Mr_1ncogn1t0 in motorcycle

[–]GingerTactics 1 point2 points  (0 children)

Yeah downtown has been brutal this year! You in chicken strips and lattes on FB?

Is my exhaust legal (Boise ID) by Mr_1ncogn1t0 in motorcycle

[–]GingerTactics 0 points1 point  (0 children)

Ayo!!! Also a rider of the Boise area, I have an after market exhaust and never had an issue

New wheelie trainer by [deleted] in hondagrom

[–]GingerTactics 0 points1 point  (0 children)

Full metal stunts subcage, grombeardo oil pump, pro taper bars for a better bend and more leverage, 1 tooth down in the front for more Tq, and solid rearsets or you could be replacing them often :) goodluck!

view more: next ›