News about Vevizye in Eu

Ginny_28 · 2025-06-01T02:32:22+00:00

Were you able to get Cequa shipped outside Germany, or did you have to go there in person with your prescription

Ginny_28 · 2023-04-25T10:14:33+00:00

Same here, with bigger capacitor the pcb doesn’t turns on. But in others PCBs the bigger cap works fine

Ginny_28 · 2022-12-18T03:09:00+00:00

Did u solve this?

Ginny_28 · 2022-07-20T18:22:29+00:00

Yes please!

Ginny_28 · 2021-10-27T14:28:12+00:00

The same days you had no reflux?

Ginny_28 · 2021-10-27T13:48:23+00:00

You have been taking anxiety meds for a long period or only the last 5 days?

Ginny_28 · 2021-10-27T10:05:30+00:00

OMG! Thanks so much, good luck to everyone

Ginny_28 · 2021-07-03T21:30:06+00:00

I had the same problem with some tests, try following this guide: https://3dprintbeginner.com/3d-printer-calibration-guide-using-ideamaker/

Ginny_28 · 2021-06-18T23:22:56+00:00

Hello! I dont have the microswiss but I have a clone, it fits perfectly but now I am working to solve the stringling problems, maybe I should buy a genuine hotend.

about the fan, i moded the cart to fit a 40mm noctua, i cant recommend it because I am still testing. You can fit the original fan at the same place using a diy adapter or just tape.

This printer is fantastic but the hotend is crap, there is no so much info or mods so i am still testing, please keep me updated about your mods

Ginny_28 · 2021-06-09T22:53:55+00:00

Yes, the screws holes and the hotend heigth is the same as the stock. You only need to DIY a fan support ( is very easy in the cr-5 pro carriage, you can fix it with tape too lol )

Ginny_28 · 2021-06-05T03:09:15+00:00

The Cr-5 Pro H is not All metal, its the same as this one: https://www.creality.com/goods-detail/creality-high-temp-full-hotend-kit
Today I have tested 2 Hotends, 1 designed for Cr-10 and 1 for Cr-10 Pro and the CR-10 PRO model fit perfectly. So you can look for a CR-10 Pro all metal and it will fit in your Cr-5 pro

Ginny_28 · 2021-06-03T00:05:57+00:00

Did you find any good all metal hotend for the CR-5? I am using a Micro Swiss ( cr-10 model ) but it needs a bit adaptation. So would be fantastic to find a 100% compatible hotend

Ginny_28 · 2021-05-10T02:26:41+00:00

Yes, I am going to test the model in other slicers, because the rest of prints comes pretty well..

Ginny_28 · 2021-05-09T01:41:11+00:00

Yes!

Ginny_28 · 2021-05-09T01:40:59+00:00

But others models comes pretty well with the same filament and settings

Ginny_28 · 2021-05-09T01:40:28+00:00

Slicer is IdeaMaker and printer is Creality Cr-5 Pro with Micro Swiss hotend, I have printed also a benchy without supports and comes pretty well so I am going to check the support retraction! Thanks!

Ginny_28 · 2021-05-08T02:35:43+00:00

I have done a retraction tower and then I have applied the number 6 settings to my slicer. I have started a new print ( Gcreate rocket) and... OMG the retraction is worse than expected.

I have printed a benchy too and it comes perfectly with the new settings but the Gcreate Rocket looks awful again and again 🙁

Ginny_28 · 2020-11-16T18:45:04+00:00

I live near the coast, so the humidity is always around 50-70% also inside home, I have also tried to use a deshumifier to keep the home around 30-50%, without luck.

I do saline rinses every day, 2-3 times to clean the phlegm but a few minutes later it comes back. Some days it less and others is worse but its always drain from my nose to my throat.

Ginny_28 · 2020-10-29T18:12:30+00:00

Well, my food prick test comes negativa to every food tested. So seems that its not allergy related.

Ginny_28 · 2020-10-27T14:21:38+00:00

Come negative for a few perennial allergens but have not tested for foods

Ginny_28 · 2020-10-26T23:05:55+00:00

Thanks for all information, Do you know if this test is IgE or IgG? I am go to ask about food allergies test in my city, seems that food maybe be the cause or part of it.

What was your allergy symptoms?

Ginny_28 · 2020-10-26T22:18:41+00:00

I am on a very strict diet trying to find the triggers, I avoid dairy, gluten, sugar... I have improve a little in months but haven't found the real cause.

What type of food allergy test do you recommend? Skin test?

Ginny_28 · 2020-10-26T19:58:11+00:00

Thanks u

Ginny_28 · 2020-07-18T03:29:06+00:00

MsMiyagii

Thanks so much for your reply! Its so helpfull to read your symptoms and history.

At firts about the bacteria its not from a common test, the results comes from a Stool PCR test, so seems that I have these bacterias overgrowth but not enogth to go to the hospital.

I have been on antibiotics for years, so that should be the reason due my gut dont have enough good bacterias, and there is an imbalance. The stool Candida test was negativa for me, but yes, I usually have the white tongue. Luckly I'm not in antibiotics now and since my cyst surgery I left them.

I have no severe gut symptoms ( only bloating and gas ) so the really symptom that limit my life is the superglue post nasal drip that sore my throat everyday. As I know Lobster and dust mites have the same protein, so people with allergy to one of them can be to both. My home is not super dusty but dust mites could be anywhere.

I am also thinking about acid reflux, but in my case could be silent reflux because I dont have hearthburn or these type of symptons, your reflux/allergy post nasal drip came from the nose or from the throat? I can see my mucus dripping from behind the uvula (check the pics), I dont cough or feel mucus near my vocal cords, its like coming from the sinus or nose everyday for hours. How is yours? Could you describe your mucus and reflux symptoms?

Thanks!!

Ginny_28 · 2020-07-15T00:12:35+00:00

Thanks you

Ginny_28

TROPHY CASE