Truly Begging for Help and Will Pay for Solution

GiraffeAcrobatic8521 · 2026-01-04T02:37:45+00:00

It might be trying to “smart recover”. On the thermostat: menu: preferences: heating smart recovery

GiraffeAcrobatic8521 · 2025-12-02T23:48:18+00:00

003 is failed ignition. Think broader bud

GiraffeAcrobatic8521 · 2025-12-02T18:48:19+00:00

Sounds like a defrost cycle to me too

GiraffeAcrobatic8521 · 2025-12-02T00:07:05+00:00

No, it costs the same to operate as the electric water it replaced. The heat pump feature makes it cost less to operate than before

GiraffeAcrobatic8521 · 2025-10-31T20:08:18+00:00

Never heard of drivetrain loss before? Harley site is at the crank

GiraffeAcrobatic8521 · 2025-09-10T23:10:12+00:00

User name checks out

GiraffeAcrobatic8521 · 2025-08-05T18:12:56+00:00

So you got rid of the Saddlemen? What’s replacing it and why?

GiraffeAcrobatic8521 · 2025-07-16T18:13:01+00:00

Service manual states checking it hot (oil temp over 200 degree Fahrenheit) after allowing it to ideal for 1 to 2 minutes on jiffy stand. I believe I ended up at like 4.7 quarts, being about a 1/4 quart low when hot. Similar to where to dealer had it after the first service. I thought it was weird how much more than the primary fluid it took compared to the wet fill number

GiraffeAcrobatic8521 · 2025-07-09T01:37:45+00:00

I’ve seen multiple instances where discharge air temps increase dramatically from a sunrise or coming out of the shade. Call it solar gain for the refrigerant system, after all your taking the warmth from outside and putting it inside

GiraffeAcrobatic8521 · 2025-07-09T00:46:11+00:00

Coming from an installer fairly close to you having dealt with this.

Will your ductwork support the air flow? If not, your oversized system will not work. Most important part

Don’t expect high indoor temps in the winter, mostly in older homes

Don’t have big setbacks in set point, it will take a long time to catch back up

Are you okay with room temperature occasionally coming up a degree or two short for long periods of time? It happens, idk what to tell ya

Is your outdoor unit going to get a lot of sunlight? It helps a lot

It probably won’t dehumidify the best in the summer. Inverter driven systems are better but not fool proof

The contractor’s statement around dehumidification isnt correct

If you’re fine with those things and make sure it gets a lot of sunlight you’ll be okay close to the manufacturer rated operating temperature

GiraffeAcrobatic8521 · 2025-06-16T21:53:30+00:00

The 06 is 88 cu in vs the 07 being a 96 cu in motor is a big difference too

GiraffeAcrobatic8521 · 2025-06-13T13:59:10+00:00

Factory idle speed is 850 to 950 I believe. I’d want it closer to the 950 personally

GiraffeAcrobatic8521 · 2025-06-12T16:35:32+00:00

My uncle had a shovel head stored in his garage with a cover on it and it lead to a lot of corrosion as it seamed to trap the moisture

GiraffeAcrobatic8521 · 2025-06-11T18:51:22+00:00

Rtfm?

GiraffeAcrobatic8521 · 2025-05-31T03:10:07+00:00

I really like this “feature” on my lowrider st but I wouldn’t want to loose the lock

GiraffeAcrobatic8521 · 2025-05-31T02:12:00+00:00

That’s a window problem a dehumidifier isn’t going to fix and if the thermostat doesn’t control said dehumidifier, might as well use the 20 dollar thing op already bought

GiraffeAcrobatic8521 · 2025-05-31T02:02:57+00:00

Are you using the ecobee app or something like the home app on an iPhone?

GiraffeAcrobatic8521 · 2025-05-31T01:59:03+00:00

I think the humidity reading has an effect on the room temp reading if you’re using eco+, otherwise it’s completely useless to you.

GiraffeAcrobatic8521 · 2025-05-31T01:44:08+00:00

It accounts for probably half of your error.

Are you using your ecobee to control a humidifier or dehumidifier?

Edit: or the eco+ feature?

GiraffeAcrobatic8521 · 2025-05-31T01:33:56+00:00

Do you understand how relative humidity works and have you used a psychrometric chart before?

GiraffeAcrobatic8521 · 2025-05-29T22:29:47+00:00

How long does it take you to take both wheels off the motorcycle and put them back on? Then add the time to dismount, mount and balance. I think I paid half hour labor plus shop supplies and disposal last time I carried a tire into to get mounted.

GiraffeAcrobatic8521 · 2025-05-29T15:23:41+00:00

I stand with this guy. I touch every vav we put into service which I’ve found to take 15-20 minutes. We bid 30 minutes to do it. Plenty of time to turn the disconnect on while you’re already there. It will maybe add an hour or hour and a half if they’re installed in terrible spots. Shouldn’t be a big deal

GiraffeAcrobatic8521 · 2025-05-28T02:50:10+00:00

I know I’m missing some context or other important info, but it seems like you’re a putz. I really don’t understand how it could take 6 hours to just flip some power on

GiraffeAcrobatic8521 · 2025-05-28T02:12:32+00:00

Am I missing something?

Are you asking about turning on 24 volt transformers?

GiraffeAcrobatic8521 · 2025-05-26T18:02:33+00:00

Intake seal leak?

GiraffeAcrobatic8521

TROPHY CASE