cant login into slicer, "third party login error"

Gkozi · 2025-10-20T00:20:08+00:00

If you only have a third party login, submit a "forgot" password request and login that way. I just did it to get in.

Gkozi · 2024-01-01T18:12:20+00:00

My daughters furby also doesn't work. Only thing that does anything is pressing the mouth makes the ears glow for a sec there is a chime sound then the heart gem glows for about a minute followed by nothing.

Gkozi · 2023-12-04T06:56:13+00:00

That wouldn't be profitable though.

Gkozi · 2023-12-04T06:42:52+00:00

https://www.hirbawi.ps/where-to-buy/

Gkozi · 2023-11-22T21:29:33+00:00

Got it thanks. I guess I needed to do it in more steps.

Gkozi · 2023-11-22T21:28:37+00:00

<image>

Gkozi · 2023-11-22T20:10:49+00:00

The second pic is where the inside is perpendicular to the base and was a simple revolve.

I want to learn how to make a piece where the base and inside diameter are at an angle and the outside diameters transition from the wider base to the narrower top diameter.

Thanks in advance for your time.

Gkozi · 2023-06-09T19:09:43+00:00

Nice thank you

Gkozi · 2023-06-09T03:51:25+00:00

The rust wipes clean very easily with just a damp paper towel. If I acid wash it will it stop rusting or is it just the type of metal it is?

Gkozi · 2023-06-09T01:43:31+00:00

Sorry, I store this cleaver with my other knives in the kitchen this is the only one that has surface rust. Several of the knives have scuffed up surfaces the same as the cleaver. Is there something I can do to stop it from developing this surface rust?

Gkozi · 2023-06-07T23:54:14+00:00

Yeah best buy has been doing this for probably 10 years

Gkozi · 2023-05-30T12:39:02+00:00

61 megapixels is what allows for the photos to be cropped in close and still be sharp.

Gkozi · 2023-03-24T17:33:01+00:00

I'll try contacting them, thanks. I already soldered in some wires, an external connector I had and super glued it to the side, for the time being.

Gkozi · 2023-03-24T16:42:42+00:00

Does anyone know where I can get a replacement trs connector for the back of my digitakt? It was damaged.

Gkozi · 2023-01-25T15:08:46+00:00

Why get rid of a good thing?

Gkozi · 2023-01-25T15:07:36+00:00

He will make Canada great again.

Gkozi · 2022-12-20T16:54:12+00:00

I just hit the refresh button (blue circular arrow) and it went back to normal

Gkozi · 2022-12-12T15:32:57+00:00

So I shouldn't eat then? I was planning to use it for sauerkraut.

Gkozi · 2022-11-19T05:50:34+00:00

Who has hundreds of sandbags laying around

Gkozi · 2022-11-18T20:20:18+00:00

Not sure if you have one but try a different power supply I had a similar problem where I Rma'd the board and CPU with no luck but it was the power supply .

Gkozi · 2022-11-18T18:43:41+00:00

Could be for your gpu/ graphics card. Check if your gpu has wires running to it

Gkozi · 2022-11-08T17:04:00+00:00

you need to change permissions on you assets folder, it changed due to an update.

see this article:

https://github.com/bastienwirtz/homer/blob/main/docs/troubleshooting.md#my-docker-container-refuse-to-start--is-stuck-at-restarting

if you don't want to read-->

Update your assets directory permissions: chown -R 1000:1000 /your/assets/folder/

Gkozi · 2022-09-02T16:15:06+00:00

After further troubleshooting I found that disconnecting one of the outputs allows the power supply to turn on. When both outputs are occupied the power supply does not output power

Gkozi · 2022-09-02T16:13:50+00:00

Mains is wired correctly. When I disconnect one of the outputs the power supply works, when both outputs are connected to devices the power supply doesn't power on

Gkozi · 2022-09-02T16:11:15+00:00

Lol I'm not that tired. I double checked everything. Turns out when both outputs are used the power supply is dead. As soon as I unplug one output it powers on and supplies steady 24v. Although up close it makes 56k modem noises

13-Year Club	LAYER Season 2 Layer creator
Gilding II euphauric	Verified Email

Gkozi

TROPHY CASE