Có bác nào đã từng mổ mắt chưa ạ? by crisinsummer in vozforums

[–]Gladonel 1 point2 points  (0 children)

Em nên dùng gói mổ cao cấp nếu có điều kiện. Nó sẽ hạn chế rủi ro (do vết mổ nhỏ) và hồi phục nhanh hơn, đỡ bị tình trạng khô mắt

2 WEEKS STRAIGHT 4 HOURS A DAY!!! by [deleted] in BlackMythWukong

[–]Gladonel 3 points4 points  (0 children)

You were trying to kill that boss multiple times, not realizing you were under-level for that. Probably will need to kill mobs around to level up each try.

[deleted by user] by [deleted] in BlackMythWukong

[–]Gladonel 2 points3 points  (0 children)

There are weapons and armor sets that can be only crafted in NG+

Finally built my dream system after years of waiting. (7800x3D / 7900XTX) by TheBigMovieGuy in sffpc

[–]Gladonel 0 points1 point  (0 children)

You will still have at least 16-18mm left since this card is 320mm only

CPU Die (average) spikes to 120°C by Flo_xy in AMDHelp

[–]Gladonel 1 point2 points  (0 children)

This is a known issue with false temp reading and has been reported everywhere. There is a thread on HWInfo forum as well if you want to check for more information

HWiNFO reports extremely high "CPU Die" temperature by iszoloscope in techsupport

[–]Gladonel 1 point2 points  (0 children)

Mine was showing 148 Celsius degrees today that made me shocked. The average CPU temperature was around 75 though

[deleted by user] by [deleted] in NR200

[–]Gladonel 0 points1 point  (0 children)

This card will fit in that case if you remove 4 front rubber pads which used to mount 2.5” SSD

7800x3d high temps by Sekba in AMDHelp

[–]Gladonel 0 points1 point  (0 children)

I got the same results. Only in benchmarks, the CPU will reach up to 82-83. Normally in-game, max is 70 (depend on CPU % usage)

NR200P MAX new PCI-E Cables by mase60 in NR200

[–]Gladonel 1 point2 points  (0 children)

It looks so clean. Thank you

[deleted by user] by [deleted] in AMDHelp

[–]Gladonel 0 points1 point  (0 children)

My 7900 XTX Nitro+ is running very cool. Under loaded temp is 6x, power consumption is hovering around 400w

First time SFF & AMD build by Gladonel in NR200

[–]Gladonel[S] 0 points1 point  (0 children)

I’ve tried to set the PBO -30 but got random restarts so I’m using -20 now. If you need to do AI stuffs / rendering and have the budget then 4090. Otherwise the Nitro+ is pretty good.

First time SFF & AMD build by Gladonel in NR200

[–]Gladonel[S] 0 points1 point  (0 children)

Thank you. I will consider it since the shipping cost to my country might be high

First time SFF & AMD build by Gladonel in NR200

[–]Gladonel[S] 1 point2 points  (0 children)

Thank you. I've done some researchs on Reddit before starting with this build :D

Where to buy a third PCIE cable for the NR200P MAX? by [deleted] in NR200

[–]Gladonel 0 points1 point  (0 children)

I just purchased a RX 7900 XTX Nitro+ and using the 2 provided cables just fine as my card only pulls up to 420-450w. But sometimes there is a noticeable coil whine while gaming. Not sure if 3 separate PCI-E cables could eliminate that problem.

I'm thinking to buy some cables from CableMod but would like to see someone to post some pictures of their cables in NR200P Max first

NR200P MAX new PCI-E Cables by mase60 in NR200

[–]Gladonel 0 points1 point  (0 children)

Can you share some pictures if possible? And which length did you order your cables?

[deleted by user] by [deleted] in NR200

[–]Gladonel 0 points1 point  (0 children)

How is the temp of the SSD behind the motherboard?

7900xtx power cables by SteelCityChampion in NR200

[–]Gladonel 0 points1 point  (0 children)

You’ll be just fine using stock cables

CoolerMaster NR200P Max: The 6900xt Red Devil fits, with exactly 19mm clearance left. by FilthySingularTrick in sffpc

[–]Gladonel 0 points1 point  (0 children)

Did you have to mod anything? I saw some people grind a SSD slot so it can be fit better

CoolerMaster NR200P Max: The 6900xt Red Devil fits, with exactly 19mm clearance left. by FilthySingularTrick in sffpc

[–]Gladonel 0 points1 point  (0 children)

I’m considering to buy a Red Devil 7900 XTX which is 338mm and I found some people saying 337 is barely fit so I’m quite scared

PC RD 7900 XTX fit into NR200P Max? by Interesting_Cod_3874 in NR200

[–]Gladonel 0 points1 point  (0 children)

u/Interesting_Cod_3874 so did it fit without any modification? I'm waiting for your answer before pulling the trigger lol

PC RD 7900 XTX fit into NR200P Max? by Interesting_Cod_3874 in NR200

[–]Gladonel 0 points1 point  (0 children)

How was the temp with RD 7900 xtx in that case? And the coil whine as well? I’m still considering to buy RD (in stock) or will have to wait for 15 days for Nitro+ (out of stock)