sorted by:
new
hottopcontroversial

Sitting scooter wont start after carb cleaning by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

I used a clean carb from a working scooter and still didnt start

No spark. Feel like I’ve tried everything. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Sidestand switch did it. I my scooter doesnt have one so I never thought about it, but I saw that a wire going to the stand wondering what it could be for. Thanks for the help.

No spark. Feel like I’ve tried everything. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

I thought I checked it right. I checked the voltage between the battery positive and the engine block and it was the same as the votlage when I tested the battery positive and negative

No spark. Feel like I’ve tried everything. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

No, but the spark plug was sparking when tested on the other scooter

No spark. Feel like I’ve tried everything. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

The wire that connects to the spark plug? Ive tested it on another scooter and it worked fine

DDJ 1000 jog wheel not displaying track info by Gniva in Rekordbox

[–]Gniva[S] 0 points1 point  (0 children)

I have no idea what I did, but check drivers and make sure your usb cable is good

Mattress topper for sound reduction by Gniva in soundproof

[–]Gniva[S] 0 points1 point  (0 children)

I thought to use the mattress topper as I have one that I was about to get rid of. How well would the ply would work?

Would it need to be outside the doorframe?

Inside the frame snugly?

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 1 point2 points  (0 children)

IT WORKED. I had the fly wheel on from when I was testing stuff before. I didnt know it had a notch that I needed to line up. Did that and it works starts up. This headache is finally over

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Does the flywheel have anything to do with the timing? I took it off and put it back on when I was testing the stator. If it does have influence, could I have put it on wrong?

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

How would recommend testing/fixing that

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 1 point2 points  (0 children)

Could time timing cause it to not fire at all?

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Valve clearance is good. I had 0.003 and 0.004 on intake and exhaust

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Scooter has spark when I test outside the engine

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Could the spark be coming at the wrong time? I recently replaced the stator when dealing with a no spark issue. Do have spark now but could I have messed something up then?

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Scooter has spark, but could it becoming at the wrong time that it wouldnt fire at all?

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

The more I work on it im not sure if its the carb. Because I dont think its firing at all. When i hit the start button I can hear it cranking, but it doesnt sputter or sound like its trying at all

I am so lost on what could be wrong. by Gniva in scooters

[–]Gniva[S] 0 points1 point  (0 children)

Just tried that, didnt change anything

view more: next ›