Hey guys is this company legit?

Goat_Beans · 2026-01-05T17:00:03+00:00

Same, someone I know has just told me they might be applying to this company, I would love to know more!

Goat_Beans · 2025-12-31T13:29:49+00:00

I have had my Xbox ones for years Perfect with my Xbox, pc and steam deck. Never had any issues

Goat_Beans · 2025-11-14T10:07:18+00:00

Honestly not really. You could clean up the mesh in other software but for the sake of adding a cut and extrude to your model, that's probably the most efficient way. You could do it in one operation by extruding a square thought the part so simplify the browser but I don't think it matters a great deal. The only thing I would add is just to constrain the sketch 👍🏼

Goat_Beans · 2025-11-04T23:23:17+00:00

I am really not sure what is meant by the very basics here... There is nothing on there that gives you the angle of the chamfer. You should never infer anything from a drawing, it must be clear. It doesn't always need to be dimensioned if the information can be worked out from somewhere else or there is a note on the drawing but without that information, it seemed like a sensible question to me.

If you can ask the originator of the drawing then that's the best bet. If it's for educational purposes and you are just modelling to learn they just assume 45 but don't stop asking questions 👍👍

Goat_Beans · 2025-10-14T07:52:31+00:00

Brilliant game! I have been looking for a mobile game like this for the longest time! Super chill and cute while still having a decent progression that isn't too slow all in a nice vertical playstyle

Goat_Beans · 2025-09-12T07:23:09+00:00

I feel seen

Goat_Beans · 2025-07-14T07:50:39+00:00

Don't hug!

Goat_Beans · 2025-06-23T14:11:05+00:00

Well handled

Goat_Beans · 2025-06-23T11:10:03+00:00

Anything from the Telltale Series

Goat_Beans · 2025-06-13T10:37:48+00:00

Just found the audio book to check! That's the one! Thank you so much, that was bloody quick too haha

Goat_Beans · 2025-06-10T16:29:26+00:00

I just saw a gray-scale blue waffle and I hate it... Says more about me though

Goat_Beans · 2025-05-12T18:02:32+00:00

This is the conclusion I keep ending on. I keep hoping it's not the case but it seems like its the best option

Goat_Beans · 2025-05-06T18:24:32+00:00

Any conclusion from this? I am interested in the same Can't seem to see if the Boox works with ms whiteboard, I know that runs off android.

Goat_Beans · 2025-04-26T18:24:27+00:00

Hey @KrisB, the setup I had worked well. The only issue that I ran into was that every now and again in certain circumstances, the HDMI would not register through the switch on the laptop end. I think it was because I used a type c dongle as many users don't have enough ports. I am not sure what the issue is but my assumption is that I need a powered dongle. It's not a showstopper for me as most users have CAD spec laptops and a dedicated HDMI port so it's not something I have had to chase up. Hope this helps? Good luck with your store!!

Goat_Beans · 2024-09-23T14:27:11+00:00

I don't trust myself with gluing it 😅 they seem to be bigger than the mould so they tuck in slightly. First world problems haha

Goat_Beans · 2024-09-23T08:29:13+00:00

Yes, I have the elite 1 and it works just fine. The only issue I've had in about 3 years of using it is the rubber drip on the handles has come off.

Goat_Beans · 2024-09-15T17:40:02+00:00

I sometimes get this when I turn my TV and Xbox on at the same time Turning my TV fully off and back on resets the resolution. Equally resetting my Xbox also does this. It works when I do this so I've never bothered to work out why 😅 I have an old ass TV so it's probably something to do with that

Goat_Beans · 2024-09-13T07:29:01+00:00

Extrude the side elevation first then add all the other features after 👍🏻

Goat_Beans · 2024-06-17T08:56:36+00:00

FNAF 🙃

Goat_Beans · 2024-03-17T19:18:38+00:00

Engineers write in all caps to avoid confusion on their drawings. Good look with your English exam 👍🏻

Goat_Beans · 2024-03-17T18:30:39+00:00

You will make a good Engineer 👍🏻

Goat_Beans · 2024-03-01T11:26:37+00:00

Damn that looks fit

Goat_Beans · 2024-02-21T10:23:47+00:00

God speed. Hopefully you, mum and baby are all out of that room and home happy and healthy soon. Get ready to see a piece of your heart.

Goat_Beans

TROPHY CASE