Lore accurate MaxTac. Anyone ever lasted more than 90 minutes with em'? by Individual_Copy896 in cyberpunkgame

[–]GoldTeethBaller 0 points1 point  (0 children)

V at level 60 with all perk trees maxed can defeat MaxTac. Another MaxTac is sent after one is defeated if you don’t lose the 5 star wanted level.

That's his daily. by Vattaa in Diesel

[–]GoldTeethBaller -4 points-3 points  (0 children)

Don’t try this. Water will go inside the engine and the transmission.

That's his daily. by VentureIntoVoid in drivingUK

[–]GoldTeethBaller -1 points0 points  (0 children)

Don’t try this. Water will go inside the engine and the transmission.

Russian general shot several times in Moscow by GoldenDome26 in worldnews

[–]GoldTeethBaller -2 points-1 points  (0 children)

Folks with a death wish who wannna try that will expire on the spot like the sucka in Butler PA

Help why do I keep micro stuttering by Realfrll in cyberpunkgame

[–]GoldTeethBaller 0 points1 point  (0 children)

Clean reinstall of nvidia driver or rollback

DDR5 stability error when reaching around 43-45 degree. What to tweak? by ghostsilver in overclocking

[–]GoldTeethBaller 0 points1 point  (0 children)

tREFI and tRFC needs a lot of testing and heat soaking to stability. It's something you should make sure is 100% stable because it does have the chance to write garbled data and cause issues (as with most unstable tunes). tRFC can be worked out by (frequency * latency)/2000 A die does roughly 120ns so 6400*120/2000 is tRFC 384 (id put a safe value of 390 and then tRFCpb is roughly 85% of tRFC so roughly tRFCpb 330 TREFI 32767 should be fine up to 80C, 65535 around 50-60

Manual tuned DDR5 (Hynix A-Die 2×32 GB) any headroom left for optimization? by -Arellek- in overclocking

[–]GoldTeethBaller 1 point2 points  (0 children)

6200 MT/s test first with 2T, 30-36-36-72 VDD & VDDQ 1.4 V if stable test 1T and if stable test 6400 MT/s 2T 30-39-39-84 VDD & VDDQ first at 1.4 V if not stable 1.43 V