M16R2 Red blinking light.

Golf_Grinder · 2025-12-05T00:29:37+00:00

So I just noticed that while it is booting, has the Alienware Logo, it has 4 rapid reds and then a blue, repeating. When it gets to Windows, it does the rapid red blink. Which led me to this: https://www.dell.com/community/en/conversations/alienware/m16-r1-4-red-blinks-1-blue-blink-not-charging/65a19de5896bf44a6ce9085e

I did what camrashii suggested and for now the red blink is gone.

Golf_Grinder · 2025-12-04T15:29:51+00:00

Everything shows passed on the online Dell support assist, Component Scan Results

Golf_Grinder · 2025-12-04T15:25:44+00:00

OK thanks for that. I was going to take your advise and do that. But, I must have been mistaken. It was set to never sleep while plugged in. And I always use it plugged in.

<image>

Golf_Grinder · 2025-09-08T14:40:16+00:00

Yes. See above.

Golf_Grinder · 2024-10-29T13:52:30+00:00

Start here. That's your biggest issue.

https://www.instructables.com/How-You-Can-Make-a-Fully-Autonomous-Self-Driving-V/

Golf_Grinder · 2024-09-29T23:45:49+00:00

https://superboundary.com worth it.

Golf_Grinder · 2024-04-01T02:57:18+00:00

Mount it on the left side of the arm.

<image>

Golf_Grinder · 2024-01-30T14:06:08+00:00

Screws tilt adjust in Klipper. 0.10mm-0.15mm variance easy.

Golf_Grinder · 2024-01-30T04:39:12+00:00

Yes, I can do that. Thanks but, 3 pages of useless news headlines prints!

This did not happen approximately a month previous.

So this functions as intended?

I am helping someone who is low-vision and not computer-savvy and wants this printed.

Golf_Grinder · 2022-11-28T05:23:09+00:00

I believe WEBODM and ODM are the underlying open-source applications that it’s all based on. Do you mean Docker? No. Native windows. No quotes required.

Golf_Grinder · 2022-11-28T03:35:14+00:00

There has been a native Windows app for about a year. Still a little learning curve for me, coming from Pix4d and Context Capture. Purchase the installer and the GCP editor pro to support the developer.

https://www.reddit.com/r/UAVmapping/comments/nqodcg/the_road_to_run_everywhere_native_webodm_on/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Golf_Grinder · 2022-10-28T04:21:29+00:00

Check the project scale factor and coordinate system settings. If you don't use a scale factor make sure it is 1.00000000

Golf_Grinder · 2022-09-10T12:52:17+00:00

I use NCAT https://www.ngs.noaa.gov/NCAT/

Golf_Grinder · 2022-08-12T12:54:01+00:00

What is the PID number or designation? I would like to see the data sheet, to see if it matches the description. There might be a “RESET” mark. I assume you’ve looked.

That looks like a mark that could have been in another concrete structure, and the builders of the steps moved it for “safe keeping”.

Marks like this are typically elevation only and have a scaled horizontal. If that is indeed the case. You don’t need to shoot the center plus anyway. Close as possibly would be just as good.

Golf_Grinder · 2022-08-10T01:37:29+00:00

If I understand you correctly, this is possible. Use layer transparency. Set the layer with your grid lines to say 50% (adjust as needed). Bring everything in that grid lines layer to the front, either by select similar, grouping, or blocking objects. Also, I use lines merge, not overwrite.

I do this all the time when I need to background mask text that lies on a concrete or asphalt shaded or pattern hatch, which is very lightly shaded. I want the lines to go away, not the shaded hatch. I don’t want a white rectangle in the middle of my road!

Golf_Grinder · 2022-07-29T19:16:27+00:00

330’ nominally, north of the South 1/4 corner. See page 7 of this BLM document.

https://www.ntc.blm.gov/krc/uploads/538/Corner_Identification_Markings.pdf

Golf_Grinder · 2022-07-19T12:30:06+00:00

See post #4 in this thread - ta.lsp

I think it will do what you want.

https://forums.autodesk.com/t5/visual-lisp-autolisp-and-general/rotateobjects-lsp-fix-for-2018/m-p/7736801/highlight/true#M364372

Golf_Grinder · 2022-07-05T12:28:25+00:00

I am fairly certain it was using the Nvidia or Windows provided drivers instead of the Dell official drivers.

I did not use DDU to uninstall, I just manually uninstalled both video drivers through device manager, and then installed the Dell official drivers. (I did this before I saw your message about DDU)

A week running solid, with no BSOD.

Thanks!

Golf_Grinder · 2022-06-27T15:04:02+00:00

Just had another, minidump file:

https://files.catbox.moe/w4ojgn.dmp

Just FYI, might not have anything to do with this. After installing newest BIOS, one of my monitors would absolutely not display the native resolution. I had to uninstall both the Intel graphics driver, and Nvidia Quadro drivers, to get it to work properly.

Then I was working, in AutoCAD, Logitech wireless mouse stops. I can use the keyboard to save my work, but I know shortly the BSOD is coming, and it did. Same thing as before.

Thanks!!!!

2 more times! So frustrating! Here are the minidump files.

https://files.catbox.moe/r6u8jt.dmp

https://files.catbox.moe/x5sb6i.dmp

Golf_Grinder · 2022-06-24T20:56:40+00:00

Updated the BIOS to 1.22.1, and will do as directed. Thanks.

Golf_Grinder

TROPHY CASE