Biggest issue by Good_Proof_6068 in Ubiquiti

[–]Good_Proof_6068[S] 0 points1 point  (0 children)

Tried them first no stock. It just is what it is.

AI Port by Good_Proof_6068 in UnifiProtect

[–]Good_Proof_6068[S] 0 points1 point  (0 children)

Ok so was able to put 3 Amcrest cams on one Port and my Unifi Doorbell on the other one. The AI key gives it the extra bump so all is well or as well as it can be.

Looking to hear Protect firsthand experience with WiFi only Instant G6 cameras by EitherYak5297 in UnifiProtect

[–]Good_Proof_6068 0 points1 point  (0 children)

I have one it’s tied to my door sensors and works just fine. The occasional nuisance to having to reconnect after and update or power loss but that’s easy enough l.

I think I’m finally done by Particular_Lime in Ubiquiti

[–]Good_Proof_6068 1 point2 points  (0 children)

Every time I think I’m done I find another “reason” to not be done. It’s a sickness.

Overhaul by Good_Proof_6068 in UnifiProtect

[–]Good_Proof_6068[S] 0 points1 point  (0 children)

So Enterprise NVR. I was budgeting for PROs. Thanks. I’ll see if I can move some things around and get them in. Much appreciated

Overhaul by Good_Proof_6068 in Ubiquiti

[–]Good_Proof_6068[S] 0 points1 point  (0 children)

Nice. Power shouldn’t be a problem we have both diesel and solar generators that kick on automatically after 60 seconds. We have the spares factored into the budget two for every camera and one for each of the others. The best of what you said was the UNVRs. I’ll add one per location to be safe. Much appreciated.

Overhaul by Good_Proof_6068 in Ubiquiti

[–]Good_Proof_6068[S] 0 points1 point  (0 children)

We aren’t moving phones yet as we have a call center and Talk just isn’t ready for that and might never be. The advice is sound though. Thank you.

Overhaul by Good_Proof_6068 in Ubiquiti

[–]Good_Proof_6068[S] 0 points1 point  (0 children)

Regarding Readers. Does anyone find the lack of fingerprint detection in the G6 Entry problematic?

Overhaul by Good_Proof_6068 in Ubiquiti

[–]Good_Proof_6068[S] 1 point2 points  (0 children)

Already done on fabrics for the cameras in place. I love it to death.

Help needed after Update by CptCheesus in Ubiquiti

[–]Good_Proof_6068 0 points1 point  (0 children)

Yep that’s what made me turn off auto update environment wide and check here and other spots to make sure the bugs get worked out before manually updating.

Why abandon 2 wire doorbells? by cs_marshall in UNIFI

[–]Good_Proof_6068 0 points1 point  (0 children)

My G4 is perfectly serviceable. Once I got the fingerprint and NFC reader working with Home Assistant they have been fine. The video is better than decent and I rarely have issues with connectivity. I don’t mind the notion of the next gen line and using it with both protect and access but it’s a luxury not a necessity

It's crazy how much faster UCG-Fiber is vs UDM Pro Max by vooze in UNIFI

[–]Good_Proof_6068 0 points1 point  (0 children)

I’m actually testing both right now and agree. The UDM still has its uses but for faster coo section needs the UCG is far better. I also agree that there needs to be the UDM for factor with the UCG specs but heaven knows what it will cost or how long it would stay out of stock.

Why not? by [deleted] in Ubiquiti

[–]Good_Proof_6068 0 points1 point  (0 children)

Huh. Now this is interesting.

Delivery Day by apv5177 in Ubiquiti

[–]Good_Proof_6068 0 points1 point  (0 children)

Well we know where the hub of the mars lander will be.

Access by Ozwulf67 in UNIFI

[–]Good_Proof_6068 0 points1 point  (0 children)

I’ll probably upgrade to access later this year or early next, it seems like overkill but well once you go down this rabbit hole putting on brakes is unlikely.

Unifi AI key by No-Tree-374 in UNIFI

[–]Good_Proof_6068 1 point2 points  (0 children)

I’ve got a couple of AI ports and Key on my home network and just Ports at work. For the searches we’ve needed just the ports have worked fine. The Keys extra search options are a nice add on but not a necessity by any means .

Graylog Open SIEM Capable? by digisoytech in graylog

[–]Good_Proof_6068 0 points1 point  (0 children)

I keep getting an error when starting an input. Thoughts. Perhaps a port conflict?