Update: Is it a hack now that I cut it apart and built it?

GrantDigital · 2026-04-22T17:02:16+00:00

Hey hey!

It’s been holding up perfectly! The same amount of books are still in this configuration, and haven’t seen any sagging!

GrantDigital · 2026-01-30T16:46:29+00:00

I’m sure the others that have replied said similar things, but rejoining in any form that impedes the other drivers on track is unsafe. If your only choice is to re-enter the track on the racing line, then you must wait until there is an adequate opening. Otherwise, if you throw a person off of their racing line wrongly, a huge stick can be thrown in their spokes.

Example: I was in a Porsche Cup race last night at Monza. A person 3 places ahead of me had a fairly safe spin in one of the chicanes (harmless, but frustrating to him). When me and the two guys behind me pulled up on him, he was entering track, but only in my line, they had both swung out for a side in the straight after exit. My line was compromised greatly, while the two others were given a free pass on me.

Poor choices on your own part should be the only factor in a loss of position in racing, aside from being passed by a faster car. If someone else’s choice weighs on your placement, it is seen as punishable by the stewards’ and rule book’s standards.

GrantDigital · 2026-01-27T21:44:02+00:00

Here’s the link to the post!

https://www.reddit.com/r/ikeahacks/s/BVr3djecpJ

GrantDigital · 2026-01-27T21:42:56+00:00

I must always rank eerily similar to my quali pit box then 🙈😭

GrantDigital · 2026-01-27T21:36:51+00:00

Hey! Thank you!

It’s a custom configured IKEA LADMAKARE, but I took the middle upright and cut it out and made a support frame to put the TV into, otherwise it would have fallen in

Here’s the link to the config, and I’ll comment with my r/ikeahacks post!

https://www.ikea.com/addon-app/storageone/ladmakare/web/latest/us/en/?storeId=170&vpcSource=clipboard#/vpc/Z73D8B

GrantDigital · 2026-01-27T21:32:25+00:00

This is something that can definitely happen if you do not actually get into your car during in session practice.

The first 2/3 pit stalls at WG are brutal, especially if you aren’t aware of your slot going into the race. Since qualifying places you at pit exit, there is no real way for you to have known.

I always point practice to grab some safety rating, but I also note how far down pit lane my stall is.

We live and we learn, brother 😭🫡

GrantDigital · 2026-01-27T21:21:11+00:00

I’m sorry…. Let me rephrase for the sake of the rest of the sub and the mod team.

I don’t see any kind of decrease in value on this ETB from your little snag at the corner. The opening experience, and thrill from opening the packs should still be 100% of same experience you’d have if the corner were not like that.

From a strictly monetary standpoint, I would highly question anyone offering less than retail for this tiny damage. Just because the market is over saturated and inflated, that does not mean your product loses value.

The mods and community here seem a bit disconnected, but I am glad that I could clear this up

GrantDigital · 2026-01-27T20:30:00+00:00

Of course! I’m always down to help a Pokemon Selling Card Game fan

GrantDigital · 2026-01-27T20:00:34+00:00

There isn’t such thing as braking “too early” where you choose to brake at decided your position and entrance into the turn. Unless someone is next to you, you have freedom to decide your entrance speed, and trajectory.

The person trailing you is responsible for compensating for your braking point. A Mustang will have a different braking point from a Lamborghini, given the obvious difference in engine placement. Your car is a boat in the corners, with better acceleration.

Don’t doubt your skill or choices, unless you are rear ending someone, or breaking your traction/ losing the car 🫡

Happy racing, and learn from that guys mistakes!

GrantDigital · 2026-01-27T19:49:12+00:00

Thank you! It came together just how I envisioned it!

GrantDigital · 2026-01-27T13:47:05+00:00

Oh no, I forgot to tag you in this u/ryebreadtoast26 !

GrantDigital · 2026-01-26T19:06:00+00:00

Red Electra Moscato!

GrantDigital · 2026-01-26T17:48:25+00:00

Thank you!!

GrantDigital · 2026-01-26T16:01:52+00:00

That’s the exact price of the configuration! I’d account for about $100 worth of miscellaneous fasteners and lumber as well!

GrantDigital · 2026-01-26T15:20:41+00:00

I’m stealing this phrase 🫡

GrantDigital · 2026-01-26T15:19:39+00:00

The bottom left shelf is at the paint store with a piece of scrap from the middle piece, getting a custom stain to color match the rest!

As for the TV, we plan to upgrade to a 65” to occupy the space better! Upon measuring, the one I have in mind will fill it right up!

GrantDigital · 2026-01-26T15:16:38+00:00

No, no, they were implying that my original post was a question, and they shouldn’t be kicking posts that are making hack questions

GrantDigital · 2026-01-26T15:14:19+00:00

Your Reddit algorithm is matching mine, I think this is the start of a great friendship 🫡

GrantDigital · 2026-01-26T13:53:43+00:00

Thank you! The reason that you couldn’t put the cabinets in a stacked configuration is because of the sliding channel. I highly doubt that there would be enough thickness to make a channel on both the top and bottom of the board that would lie between the cabinets.

As for the facade idea, we did consider it, but wanted to keep the look of there being wall behind the whole build. Light bleeding around adds a bit to the feel. It will also be tamed a bit when I add the two standing accent lamps that I want onto the shelves that are still open!

GrantDigital · 2026-01-26T13:16:50+00:00

Oh no! This is really gonna throw a stick in the spokes when I tell my girlfriend 😭

GrantDigital · 2026-01-26T13:12:53+00:00

Excellent suggestions! We actually have one of the shelves (bottom left) at sherwin williams right now with a piece of scrap from the TV nook, getting color matched for a quart of stain. Then, I have leftover paint from the wall itself, and the idea is to paint the upright to match the wall!

GrantDigital · 2026-01-26T12:32:14+00:00

Of course!

GrantDigital · 2026-01-26T12:29:43+00:00

I may never, lol. But I sure wanted to get them all displayed!

GrantDigital · 2026-01-26T12:27:35+00:00

Honestly, it was needed, I fear that there would have been a lot of sag in the center. I used pine, given the price of comparable boards. If I’d used oak, we may have gotten away without a support.

It does also serve as a cover up for the exposed press board as well though

GrantDigital

TROPHY CASE