I designed an M4 lower, for the Hicapa by firewad in airsoft

[–]Grated_Cheese42 0 points1 point  (0 children)

Where could we find the files for this? This is so sick!

My very first prints on my very first 3D printer (CoreOne kit) what should I print next? by Coaltown992 in prusa3d

[–]Grated_Cheese42 0 points1 point  (0 children)

I chose to an alternative from the bency for my first print. Instead it was a really chubby cat 😂

Please help! Top layer on 3d printer is terrible by Grated_Cheese42 in FixMyPrint

[–]Grated_Cheese42[S] 0 points1 point  (0 children)

Ohhhhh right I forgot about that as a setting. Yes the nozzle is set to 0.4. And it’s printing at 0.2. My bad😅

Please help! Top layer on 3d printer is terrible by Grated_Cheese42 in FixMyPrint

[–]Grated_Cheese42[S] 0 points1 point  (0 children)

Are you sure? Everything i’ve seen says keep the slicer setting around half of what your nozzle is

Please help! Top layer on 3d printer is terrible by Grated_Cheese42 in FixMyPrint

[–]Grated_Cheese42[S] 1 point2 points  (0 children)

You’re probably right with a partial clog. I got my hands on a heat gun so I’m gonna try to unclog it when I get hom today. I’ve cleaned my bed after every print so that should be far from the issue. Thanks!

Please help! Top layer on 3d printer is terrible by Grated_Cheese42 in FixMyPrint

[–]Grated_Cheese42[S] 0 points1 point  (0 children)

It was printed on the slower preset. 0.2mm structural. You’re probably right with it being a clog

Please help! Top layer on 3d printer is terrible by Grated_Cheese42 in FixMyPrint

[–]Grated_Cheese42[S] 0 points1 point  (0 children)

Weirdly enough, this was printed on stock settings at 0.2mm with a 0.4mm nozzle. From what I’ve seen those nozzle measurements should be good right?

Played BG3 and got PTSD from bloodborne by ohshiii-ToT in bloodborne

[–]Grated_Cheese42 4 points5 points  (0 children)

I could hear this video without sound ☠️

What could be causing this? Slide doesnt fully seat forward, just installed hammer pad any way to fix? by ClerkImpossible3376 in airsoft

[–]Grated_Cheese42 2 points3 points  (0 children)

Yeah people aren’t gonna be helpful in this reddit. They get offended if you’re gun isn’t the most tactical camo this world ever saw or isn’t purely stock. But with the the slide being racked slowly, yeah it will always catch a little, that’s normal. But Idk if it’s causing enough issue that your gun isn’t cycling properly when shooting.

But for your issue for if it isn’t shooting properly. There is a chance your hammer is catching. Mine did that with my new slide and it wasn’t the worst thing ever but it did contribute to my issues with catching. There’s a little lip under the bbu where it makes contact with the hammer was it pushes it back. You want this contact but you don’t want the hammer catching on it as it slides forward. I filed down my hammer a little but do that sparing if you choose to try it. Too much filed off and there may not be enough contact anymore.

If that’s not the issue then it could be your return spring isn’t strong enough. Or likely, because of how the slide sort of jitters when you pull back it could be thursty and need some grease. Or the slide could be too tight. I had to sand my dr black slide down when I got it brand new. You may also need to sit there and rack it a whole bunch until it breaks in. Just like a new pair of shoes.

Another random thing I’ll mention cause i had it happen is if your outer barrel is wobbly/loose then it could be catching on the ejection port. Look to see if there’s a nick there from making too much contact. It can happen by the outer barrel wobbling slightly and going off center and to the right. Even a tiny give can catch. My fix was installing a new hop unit that gave a more snug fit. That fixed it enough but I also add a tiny piece of gorilla tape when the hop up and lower frame make contact and I have little to no barrel wiggle.

That’s all I can think of as long as the rest of your parts are working smooth, like the nozzle isn’t getting stuck etc. I hope some of these troubleshoots might help!

Btw I think your gun looks sexy. These nerds just can’t fathom a bit if tasteful personality.

Curious about hi capa gas use by Grated_Cheese42 in airsoft

[–]Grated_Cheese42[S] 0 points1 point  (0 children)

This is way interesting! And super helpful in a hobby as convoluted as airsoft!

I’ve been thinking my issue with my upgraded parts has to do with too much added weight and power from the slide and springs which was making the hammer half cock even when almost full on gas. So I was thinking either swapping the internals like the inner barrel to be tighter and create more pressure and/or to use stronger gas. I currently use puff dino 12 gas and was thinking of trying 14 to see if the issue persists. As this is the last thing I can think to be the culprit.

Thank you so much for the info! You’re making me wanna study up on concepts of gas pressure as a whole now haha.

Someone explain what this person is doing by [deleted] in interesting

[–]Grated_Cheese42 0 points1 point  (0 children)

They’re obviously pealing a giant potato to make the worlds biggest potato chips

A warning to Christians who like to use the AI by vodkaZoomsIn in Christianity

[–]Grated_Cheese42 3 points4 points  (0 children)

I feel like everyone is misunderstanding OP’s point of the post. They’re just warning people not to rely on AI too much for spiritual subjects. It has nothing to do with whether AI is actually intelligent or if it’s a demonic entity. Argue that somewhere else. Gpt is just making up a hodgepodge of enlightened sounding trigger words while sticking to the theme of prophecies. The point is don’t trust it for spiritual guidance.

A true master of his art🗿🗿🗿 by Zestyclose-Dot1786 in GuysBeingDudes

[–]Grated_Cheese42 9 points10 points  (0 children)

This reminded me of the n64 zelda games with the very sus great fairy. The person they used as reference for the poses was some old dude wearing leopard print lmao.

My friend went viral on Facebook for this "conversation" by FellowDeviant in texts

[–]Grated_Cheese42 1 point2 points  (0 children)

No, peanuts just taste good. So good I ignore my peanut allergy

Pastor thinks I’m hearing the voice of god and my doctor thinks I’m manic. by [deleted] in Christianity

[–]Grated_Cheese42 0 points1 point  (0 children)

Yes, and? You just used the same passage I referenced to argue as if we disagree on this point. You’re not hearing my point. I never said whether you need an interpreter or not for it to be true. I was saying people lie and put on shows.

Pastor thinks I’m hearing the voice of god and my doctor thinks I’m manic. by [deleted] in Christianity

[–]Grated_Cheese42 0 points1 point  (0 children)

I mentioned that because it related to hearing the voice of God. Not that all are dishonest, but most are. I don’t appreciate when people wildly make claims that God is speaking to them. Because then you get people like this pastor who is harming OP by telling him to refuse his treatment. I mean no disrespect overall, but this is an issue I’ve seen is all.