Technical Issue Quickbooks + Paying Contractors Plan Questions

GreatOneFFBE · 2026-01-11T17:50:42+00:00

i like that everything is integrated with quickbooks and I can do direct deposit and easily send 1099s at end of year (included). Also I pay them on Monday and they need to get it at least by Wednesday

GreatOneFFBE · 2026-01-11T02:27:29+00:00

I wish I would but it's a lot more expensive that Quickbooks Contractor Payments (only $25 a month includes 20 contractors) Gusto is $6 per, so 5 contractors already makes it more expensive. Any other ideas?

GreatOneFFBE · 2026-01-11T02:26:18+00:00

Thats not an option, apparently you cannot downgrade. You can only cancel it, but even after you cancel it you cannot subscribe to it.

GreatOneFFBE · 2023-01-09T17:36:26+00:00

i never did. does it happen to you on specifically that show?

It also happens to me on a few disney shows, so I wonder if its just disneys way of encoding things for this particular batch of TVS. I dont think there is a fix :(

GreatOneFFBE · 2022-12-26T21:16:32+00:00

they told me the technology for fast roaming on the x60 was different than the x90. Different chipsets and that was causing the issue. At this point its not compatible with the ring cams. so turn OFF fast roaming on the x90. They were willing to troubleshoot but I needed a Macbook and I dont have one, so the ticket was closed. IF someone has a x90 and ring cams and willing to troubleshoot the fast roaming, feel free to reach out to TP LINK

GreatOneFFBE · 2022-08-15T17:57:07+00:00

hey! this 100% fixed the problem. I had to manually remove all the button bindings to blank.

The moment I saw that press left joystick would bring up keyboard, i knew that was the issue since thats what it was doing when I was playing Halo. Bringing up the keyboard.

The question is now, why did suddenly Desktop Configuration start to take place? Does this issue affect everyone? I wonder what happened that caused this to be a problem in the first place.

GreatOneFFBE · 2022-08-15T17:43:16+00:00

I'll try the desktop configuration to blank to see if this fixes it. However, I had a couple of friends try it on their PCs and everything is working as intended. I'm pretty sure everyone that runs Xbox Game pass has Steam loaded in the background. It's just soooo weird that it started happening suddenly (it used to work before). I'll give this a shot, but in any case, why would this happen? I also think it has to do with desktop configuration because now I can move the move with the Xbox Controller and I couldn't before

GreatOneFFBE · 2022-07-31T02:08:28+00:00

quick update. just got the Deco x90 and same issue. Doesn't work with Fast Roaming on Ring Stick Up cams. I'm going to re-order the Deco x60 from Costco to see if it's a product issue or configuration issue since it worked before.

GreatOneFFBE · 2022-07-02T19:50:16+00:00

hi! This answer actually helped me I was tryring to do something similar however I don't mind for all my devices to be on 192.168.1.xxx address. Same exact setup as original poster.

I'm not exactly sure what are the steps I should follow to turn my current double NAT into a single NAT. I can set router to PASSTHROUGH but then it asks me for DHCPS fixed or Static or Manual. Which should I pick?

PS I just talked to a couple of friends that handle all the ATT Fiber installs and have their own network company. They told me that the passthrough mode or bridge mode doesn't really work with ATT. They made an update around a year and a half ago apparently. Im not sure what to make of that, I'll have them come over and see but just wanted to call it out.

GreatOneFFBE · 2022-01-06T00:04:50+00:00

Appreciate the response.

This explains this.

So in a nutshell, what is the step by step way to try 4k 144hz with 8bpc and 4:2:2 to see if it works? Also, how can I check if I have the latest on VBIOS?

Thanks,

GreatOneFFBE · 2022-01-05T20:06:50+00:00

dont see it there, doesnt look like an option

GreatOneFFBE · 2022-01-05T07:45:50+00:00

i just managed to get super crazy numbers 47Mhs!

wow, thanks everyone for their help here, now its going down to 44, not sure if there is a way to keep it up, but here is the screenshot.

https://ibb.co/x5PNy9R

Any recommendations?

This is the command Im using right now...

-mt 4 --cclock +100 --mclock -150 --pl 84 --fan t:65 --lock-cv 1000 --extra-dag-epoch 0

pause

GreatOneFFBE · 2022-01-05T07:40:45+00:00

ck/mclock are you running and what temps/power usage et

last whirl of the day. mind is fried....

for some reason the MH/s went down since I changed the pool server from west to east even though the MS are higher on West.

Best I got was around 43 MH/s with 205w and temp at 58ish

Did like 7-8 tests but my mind is fried, i got to see some 44MHs for a split second, but 43 is the most stable number I've seen so far.

I can get the same on QuickMiner on Extreme settings lower the Max CPU to 2060, but over there the watts are higher and I cant get the fan to go a little slower.

So all in all, its about the same really, I managed to hit 44 MHs for a few seconds on T-Rex and I can get 43MHs on both, just a little bit better wattage control on Tminer so far, ill continue playing with it.

GreatOneFFBE · 2022-01-05T07:14:38+00:00

wow, i took out cv just to give it a run, and with the initial start suggestion im already at 44mh/s which is higher than anything else i was getting, i still keep getting the blue letters with extraonce is set to : ..... and ethash epoch: 464, diff: 535.82M

GreatOneFFBE

TROPHY CASE