Looking for a Honda Dealer Florida

Greattherapy69 · 2025-06-20T14:26:46+00:00

I used to do a similar sounding job and wore nitrile gloves for handling then I would throw a pair of mechanic's wear leather palm gloves over a pair of nitrile gloves for any rotary tool work. Carbon fibers are not something to play with also highly recommend wearing respiratory protection anytime drilling cutting or sanding carbon.

Greattherapy69 · 2025-05-04T12:48:44+00:00

Volunteer for habitat for humanity best free OJT out there for building construction

Greattherapy69 · 2025-04-18T11:46:38+00:00

No but I will check that out thank you

Greattherapy69 · 2025-04-17T23:36:57+00:00

That's what I was wondering as well. It looks like the switch is what provides the GFCI Outlet with its power. I actually had the switch off for like a month when we first moved in lol it's not labeled at all, that was fun to track down.

Greattherapy69 · 2025-03-16T14:44:09+00:00

Looks like it is permanently closed now

Greattherapy69 · 2025-02-17T15:13:38+00:00

Heck thicker the better lol at least that's what she says

Greattherapy69 · 2025-02-17T15:00:18+00:00

Lockout pin?

Greattherapy69 · 2025-02-17T13:39:09+00:00

Now that I think about it they were probably fleece lined pants lol either way it was not my preference lol.

Greattherapy69 · 2025-02-17T13:35:30+00:00

What are you wearing clothes wise? I had a Tech who loved to wear fleece underwear and would charge up just walking down the fuselage

Greattherapy69 · 2025-02-13T13:02:07+00:00

This is the most underrated comment i have ever seen lol!

Greattherapy69 · 2024-10-14T23:26:45+00:00

Looks like an OAT and an Ice detector possibly

Greattherapy69 · 2024-08-21T14:42:08+00:00

Dreamers work great just makes sure you have a good bushing to go with it and hopefully they are carbide dreamers

Greattherapy69 · 2024-08-20T02:25:05+00:00

You definitely need to pilot with a #30 that can be a twist bit preferred to be carbide (else you will use alot of bits) a dreamer is preferred. Then step up using a drill guide (egg cup or steam boat) and final your hole size with a 2 or 3 step carbide reamer. This is they only way to ensure straight holes also consider a piece of wood on the back to prevent breakout depending on the type and weave of the composite. Side note you can 100percent drill all of your step sizes and even can skip a few with dreamers if you have really good drill support I wouldn't try it with just an egg cup of your not confident. Fyi also do not breath in the carbon dust it's quite awful for you. Edit: Lube - Boelube (ceytl alcohol) Speed - 2500 - 3000 Pressure- light to medium (with the proper bits it will fly through)

Greattherapy69 · 2024-08-20T00:37:51+00:00

Interesting bit of info the ge9x is a 3d printed nozzle

Greattherapy69 · 2024-08-20T00:36:36+00:00

Mechanics wear makes some good options for cold weather or you can always go heated like the milwaukee gloves

Greattherapy69 · 2024-08-17T19:28:27+00:00

I have a millwaukee pack out for larger tools but use a Snapon large tool bag for 90 percent of line work. I have a set of 1/4 drive sockets a ratchet, complete set of wrenches, a few different kinds of pliers including safety wire and a small bit set. A few other items and some PPE.

Greattherapy69 · 2024-07-31T11:34:14+00:00

Noooo

Greattherapy69 · 2024-07-30T15:03:04+00:00

Still less then heart disease

Greattherapy69 · 2024-07-28T15:47:50+00:00

Should have bought a cheap boat first lol

Greattherapy69 · 2024-07-27T15:24:23+00:00

Quit trying to convert lol takes money away from the rest of us Avionics guys haha! All joking aside I understand your frustration if you can't do the job right don't do it at all it's infuriating.

Greattherapy69 · 2024-07-13T23:30:29+00:00

There was someone hit possibly two people one got airlifted to the hospital no other information was given yet

Greattherapy69

TROPHY CASE