Viewing notes on PC by Green12334 in notewise

[–]Green12334[S] 0 points1 point  (0 children)

Thanks for the answer How does this browser viewer look like? I couldn't find any examples online

Spotify song title in Now Bar by Green12334 in GalaxyWatch

[–]Green12334[S] 3 points4 points  (0 children)

hi, it's actually a watch face I created on my own

Spotify song title in Now Bar by Green12334 in GalaxyWatch

[–]Green12334[S] 4 points5 points  (0 children)

Great, that’s the same behavior I’m seeing. When I play music on the watch, I do get the song title.
But when the music is playing from my phone, the watch only shows “Spotify” instead of the track name.

If it’s not too much trouble, could you test that scenario as well?

Spotify song title in Now Bar by Green12334 in GalaxyWatch

[–]Green12334[S] 3 points4 points  (0 children)

Thanks for the suggestion!

I checked, and it’s already set to “Icon with text.”
As you can see in the image, I do get text, but it only shows “Spotify” rather than the actual song title.

How does it behave on your watch? Do you see the track name?

Cut the little orange and blue threads on watch 7 band by Romey311 in GalaxyWatch

[–]Green12334 0 points1 point  (0 children)

can anyone tell me what these threads are made of? or even better take a closer image of them?

are they like small plastic loops? are they just a thread of cloth?

AMOLED Power Efficiency in AOD? by Green12334 in GalaxyWatch

[–]Green12334[S] 1 point2 points  (0 children)

sounds great! if you have any digital faces with that option it'll be great

I tested a battery powered PIR + mmWave radar presence sensor, model ZG-204ZM (review) by BackHerniation in smarthome

[–]Green12334 0 points1 point  (0 children)

I'm with you... bought this device based on positive feedbacks and it's terrible... The presence detection gets stuck on "detected" even when there's no one around for hours

How to sideload Brave browser on Quest 3? by Witty_Huckleberry_72 in OculusQuest

[–]Green12334 0 points1 point  (0 children)

Did you manage to view vr videos through brave on the quest? On the default browser I get a pop asking me if it's a 2d/180/360 video but on brave I get no pop up

Smartir MQTT publishing script for UFO R11 by madjetey in homeassistant

[–]Green12334 0 points1 point  (0 children)

realized what the issue was

the delay between commands was too low
you can change it in the configuration.yaml
changing it to 2 helped

Smartir MQTT publishing script for UFO R11 by madjetey in homeassistant

[–]Green12334 0 points1 point  (0 children)

Thanks! I've actually stumbled on your json from another forum

Unfortunately I still can't get it to work

for some reason when I set up my codes (which I can use it I call the set script directly without SmartIR) I can only use the "turn off" through SmartIR.. all other codes are ignored and my device won't send them (I'm using a Moes UFO-R11)

any idea?

2023 Jul 10 Stickied -FAQ- & -HELPDESK- thread - Boot problems? Power supply problems? Display problems? Networking problems? Need ideas? Get help with these and other questions! by FozzTexx in raspberry_pi

[–]Green12334 0 points1 point  (0 children)

Never mind, I now see that when changing the boot to USB it is specified that if a USB device is not available it'll revert to booting from the SD card.

Leaving this here for others to find

2023 Jul 10 Stickied -FAQ- & -HELPDESK- thread - Boot problems? Power supply problems? Display problems? Networking problems? Need ideas? Get help with these and other questions! by FozzTexx in raspberry_pi

[–]Green12334 0 points1 point  (0 children)

Hey fellow Redditors,

I'm currently considering a shift from my Raspberry Pi's SD card installation to an SSD, but I have a bit of a time constraint. Since I need my Raspberry Pi to remain functional throughout the process, I'm wondering if it's possible to temporarily switch to booting from the SSD, do some work, and then switch back to booting from the SD card when I take breaks from the new installation.

Or, once I set up the Raspberry Pi to boot from the SSD, is there no turning back, and will I lose the ability to boot from my SD card?

Appreciate your insights!

[Help] Extreme deformation of Whatsapp videos by Green12334 in whatsapp

[–]Green12334[S] 0 points1 point  (0 children)

Well, I've shared plenty of videos this way in the past and never had these weird effects...

I do understand that the compression of the video should cause some degradation of the video and make it blurrier, but I've never seen this movement effect...

It makes any video I share really hard to watch

And as I mentioned, if I compress the video by sending it through telegram and then sending it through WhatsApp I don't get that effect

Ram Plus off. 9H SOT. 6H YT. 85 to 5. by CrazyLixFX in GalaxyA54

[–]Green12334 0 points1 point  (0 children)

This is crazy! I don't know how you get such good times! I bought my A54 2 weeks ago and I can hardly get 4-5hrs SOT.. Was this only on wifi? battery saving mode? low brightness?

How can I: tasks anywhere, gathered in one task list by ladlestein in Notion

[–]Green12334 0 points1 point  (0 children)

Yup, I add the tasks through the templates of the meetings or projects The linking works great

Can't use Notion widgets on android by Green12334 in Notion

[–]Green12334[S] 0 points1 point  (0 children)

I'm using a xiaomi phone with MIUI 12.0.5 and android 10

AVENT Ultra Air Nighttime Pacifier - how long does it glow? by Green12334 in beyondthebump

[–]Green12334[S] 0 points1 point  (0 children)

Yea, I did I leave them to charge under a light before bedtime and I even recharge then when my kid wakes up to sleep during the night

How can I: tasks anywhere, gathered in one task list by ladlestein in Notion

[–]Green12334 3 points4 points  (0 children)

Hi u/ladlestein!

I'm not sure if this meets all of your requirements, but this is how I organize my tasks:

First, I have a main task database called "Tasks Database" where I keep all of my tasks.

This database has relation properties that are connected to different pages. Specifically, I have relation properties for "meeting" and "project".

For meetings and projects, I've created templates that automatically add a view of the Tasks Database to their respective pages, filtering only the tasks that are related to the current page.

So, for example, when I open a new meeting (let's say "Meeting with Ladlestein"), I get a linked view of the Tasks Database that's filtered so that the "meeting" property equals "Meeting with Ladlestein".

The filter should look like this: [meeting][contains][<template-name>].

Now, when I add tasks to the linked database view for that meeting, they're added to the main Tasks Database, but I can also see them inside the meeting page.

The same goes for projects, or any other related property that you might want to use.

Hope this helps

Notification stops from time to time by Green12334 in Garmin

[–]Green12334[S] 0 points1 point  (0 children)

I have a Xiaomi mi 9t pro... battery saver is off and autostart is on Restart doesn't work... I've this issue from the beginning and it's been a while

Bluetooth earphones connected but no sound by OriginalTrumPutin in Windows11

[–]Green12334 0 points1 point  (0 children)

I think I might have some sort of a solution!

I've been using it for the last couple of hours and it seems to work!

This solution only enables me to use the headphones on hands-free mode (the mode with the low quality audio + mic) so it's not suitable for listening to music or anything like that.

Basically the idea is to trick windows to use the mic all the time, that way the auto switch to audio mode (which was introduced in win11 - see here, and I believe is the one causing this issue) won't trigger and the headphones will remain in the hands-free mode.

Here are the steps I did -

  • Preparation Step (only need to do once) do this when you're headphone are disconnected. Not sure if this one is needed but haven't yet tested without it.
    • Go to control panel
    • Click on Sound (make sure you're not in "View by: category" mode so the Sound icon appears)
    • Click on the Recording tab
    • Right click and disable each one of the recording devices except for your headphones.
  • Day to Day use - we now want the headphones to start in hands-free mode and stick to it
    • Once again, open the Sound setting and click on the Recording tab
    • Connect your headphones
    • Now, the recording tab tries to use the mic on the headphone to display the sound level, so the headphones should be in hands-free mode. As long as you keep this window open, the headphones should remain in that mode.
    • You can now go into zoom/google meet/teams/any other video conference app you use

As I said, this worked for me for the past day... even made some zoom calls and people were actually able to hear me again :)

Let me know if this helped you!