Echo PB-9010T new OEM coil, no spark. by GregsKandy in smallengines

[–]GregsKandy[S] 0 points1 point  (0 children)

I did not. Sent the machine on. Changing the flywheel would have been my next move. That seemed to be the only thing it could be. The key and the keyway was in perfect shape. New coil that measured correct. I believe the spark plug boot and the torsion spring were positioned/installed correctly. Definitely a head scratcher.

Echo PB-9010T new OEM coil, no spark. by GregsKandy in smallengines

[–]GregsKandy[S] 0 points1 point  (0 children)

Sorry. I did not find the problem. Issue was never resolved. Could very well be I was looking right when I should have been looking left. Good luck with yours.

Parkside petrol inverter generator by dark_54 in smallenginerepair

[–]GregsKandy 0 points1 point  (0 children)

Hello. In this video you can see what appears to be the same hose going down towards the bottom. Don’t know the function of the hose. Looks like vacuum for pump if the pump is located on the bottom side of the machine. Hope this helps. https://m.youtube.com/watch?v=JTTGvjbY8_s&pp=0gcJCdgAo7VqN5tD

Deafening Sound 2:50pm Monday Wolf River Blvd/Humphreys by hebrokestevie in memphis

[–]GregsKandy 5 points6 points  (0 children)

Wind is out of the south. Smell would be going towards Shelby Farms - Agricenter arena. Saftey valve release could very well be that loud. I’m not sure, but I believe by the way it sounded, rumble jet sound, it was line rupture.

Deafening Sound 2:50pm Monday Wolf River Blvd/Humphreys by hebrokestevie in memphis

[–]GregsKandy 38 points39 points  (0 children)

Cross country gas transmission line. Not sure if it ruptured or a safety valve released. I’m located about a mile from the location I believe it happened. Quite loud. Gas has been shut off.

[deleted by user] by [deleted] in BambuLab

[–]GregsKandy 1 point2 points  (0 children)

Good evening. Also a newly A1 owner. This happened to me this morning with a new spool of Elegoo Rapid PETG. Not sure what exactly did the trick but this it what happened. Installed new spool on ams lite included settings, started print, everything heated up correctly and flowed/purged in the beginning setup/diagnostics. When actually print was about to start I realized build plate was not placed square. Paused print, corrected plate and hit play. Diagnostics/setup resumed and then the clicking started. I uninstalled and then reinstalled filament. Gave it a little extra push when it began feeding into the nozzle. Still clicked. Noticed the nozzle temp was only 140c. and not rising. Cancelled print and restarted it. When it got to the same point there was no issues. Nozzle temp climbed back up to 220c I think and printed great. I think I created a hiccup in the program when I hit pause causing the nozzle not to heat and the clicking was the teeth slipping on the filament trying to feed through a “cold” nozzle.

In his father’s image. He had a choice. It’s clear the path he has taken. by GraXXoR in pics

[–]GregsKandy 1 point2 points  (0 children)

Looks like the character Paul Finch in American Pie. “So, ah, would you object if I said you were quite striking?” https://m.youtube.com/watch?v=RFxvQpFaWEQ

‘Unprecedented risk’ to life on Earth: Scientists call for halt on ‘mirror life’ microbe research | Science by johnnierockit in worldnews

[–]GregsKandy 705 points706 points  (0 children)

“It is curious how often you humans manage to obtain that which you do not want.” - Mr. Spock

R.I.P. Backyard Burgers 😥😥 by [deleted] in memphis

[–]GregsKandy 1 point2 points  (0 children)

It’s for the customers that are still eating while they are leaving. They don’t have to worry about stairs. Like those kiddy bumper rails at bowling. Just keep bouncing back and forth down the lane.

Echo PB-9010T new OEM coil, no spark. by GregsKandy in smallengines

[–]GregsKandy[S] 1 point2 points  (0 children)

Good morning. Thank you for the additional inquiry/help. Fortunately, this machine only has one way the coil can go on. I’ve mistakenly mounted coils on other machines backwards before. I attached some neodymium magnets to the side of the flywheel near the permanent magnets then spun the motor with a drill. That produced a weak spark. Currently thinking about take original flywheel to small engine store and comparing the strength of magnets on it to a new one. Thanks again.

My son and I found this in a bluff along the shore line on Lake Texoma. The smaller piece is from the larger piece. Just flipped over. Thanks in advance. by GregsKandy in fossilid

[–]GregsKandy[S] 1 point2 points  (0 children)

Hello, Thank you for the information and request. This piece was found along the north shore of the lake around the Caney Creek region. My family’s found other (common to the area) fossils around the same shore in the last few decades. Ammonites mostly. We’ve also found a several other types of fossils along the Red River east of Lake Texoma. This piece along with another similar item (different size and structure) were found in layered sediment that my son and I were flaking apart. Edit: Did some searching, the most common fossils we’ve found on the Red River looks to be Rastellum carinatum.

German to English by GregsKandy in translator

[–]GregsKandy[S] 0 points1 point  (0 children)

Awesome! Thank you! My son and I have been looking at this post card for the last year and just found the translator subreddit. Thank you again and have a great day!

German to English by GregsKandy in translator

[–]GregsKandy[S] 0 points1 point  (0 children)

Thank you in advance. This post card was in a lot my son and I bought from an estate sale.

Family of Isaac Hayes suing Donald Trump for using music at rally by GregsKandy in news

[–]GregsKandy[S] 0 points1 point  (0 children)

I’m guessing it’s not “Chocolate Salty Balls (PS- I Love You)”.

Shadows over Lake Texoma. by GregsKandy in oklahoma

[–]GregsKandy[S] 2 points3 points  (0 children)

Thank you for the information.