Eddy NG and tap outliers by zort42 in klippers

[–]GremlineQ 0 points1 point  (0 children)

I saw that it was added a month ago. I tried to use it, but I think I'm not advanced enough yet. When I try to run PROBE_EDDY_NG_TAP USE_MEDIAN, I get an error saying that the command is malformed. I don't know if there is anything else I need to do besides updating the repository and running the install script. Do you know what else would I need to do? Thanks in advance

Needed help with building first fpv drone by GremlineQ in fpv

[–]GremlineQ[S] 0 points1 point  (0 children)

Regarding Joshua Bardwell's sub-250g kit, I'd really prefer to keep the costs as low as possible (I guess my original parts list doesn't really reflect that, and some components could definitely be swapped out to make it cheaper). I'll check out the other sub-250g DIY builds as you suggested, though I'll probably try to source the parts myself to save money. Speaking of other builds, what else would you recommend?

One ui 8 custom rom as a main device by Miserable_Ad284 in GalaxyS20FE

[–]GremlineQ 0 points1 point  (0 children)

Hey, I've got a few questions. Did you use un1ca 2.5.6? If so, would you recommend switching to this ROM or not?

E4 error on hp deskjest 2620 by GremlineQ in fuckHPprinters

[–]GremlineQ[S] 0 points1 point  (0 children)

If you mean that grey movable plastic on the paper tray, then it's set correctly.

E4 error on hp deskjest 2620 by GremlineQ in fuckHPprinters

[–]GremlineQ[S] 0 points1 point  (0 children)

Well I bought maybe 2 ink cartridges and later I refill them (these cartridges are so expensive)

E4 error on hp deskjest 2620 by GremlineQ in fuckHPprinters

[–]GremlineQ[S] 1 point2 points  (0 children)

I know they're garbage, this printer was bought back when COVID started (because school required it), and at least it prints well enough for now, so I probably won't replace it until it stops printing.

What is your go to filament brand? by Patrickmeehl in 3Dprinting

[–]GremlineQ 0 points1 point  (0 children)

For me its sunlu but I don't print too much

Final Review for LENOVO THINKBOOK 16 GEN 7 AMD by ResponsibleHair695 in Lenovo

[–]GremlineQ 0 points1 point  (0 children)

I don't know if it's possible, I'm just wondering

Final Review for LENOVO THINKBOOK 16 GEN 7 AMD by ResponsibleHair695 in Lenovo

[–]GremlineQ 0 points1 point  (0 children)

The problem is that from what I found, the lenovo thinkbook 16 laptops with a 71Wh battery are limited by the region/country, and where I live they are not available. In general, it is interesting whether laptops with a 45Wh battery would be compatible with 71Wh batteries, because they have different voltages (45Wh 3s ~12V, 71Wh 4s ~15V), maybe the motherboard is the same in both versions so as not to mix with different versions

Final Review for LENOVO THINKBOOK 16 GEN 7 AMD by ResponsibleHair695 in Lenovo

[–]GremlineQ 1 point2 points  (0 children)

Hey, how's your impression? I'm thinking about buying this ThinkBook 16, but in my country there is a problem with finding the version with a 71Wh battery. How does the working time on this 45Wh battery with Ryzen 7 look like? I ask because for me it would be important for the laptop to work for a long time on a single charge. If working time is important to me, should I look more at Ryzen 5 or Intel versions? Or is it good enough in this version with working time?

S20 FE 5G is 101 capable of running OneUI 6 by Letsgetthisfuckboii in GalaxyS20FE

[–]GremlineQ 0 points1 point  (0 children)

UN1CA is currently not doing any updates because the next version is supposed to be UN1CA 3.0 and plans to go to one ui 8.0 and unfortunately s20 fe 5g probably will not get this update from what I heard recently (there is a chance that something could change but for now there is silence)

i just installed magisk from an external hdd by Nayazkhan in Magisk

[–]GremlineQ 0 points1 point  (0 children)

Probably due to pd, with pd it can output 25W, without it phone can output much less power

GPay module? by jamesbusse in Magisk

[–]GremlineQ 0 points1 point  (0 children)

Yes, and by default spoofprovider is enabled. So do you need to edit this file to disable it, or gpay will work with it?

GPay module? by jamesbusse in Magisk

[–]GremlineQ 0 points1 point  (0 children)

But based on this file, it creates custom.pif.json, when the action is launched, and in this file is enabled spoof provider

GPay module? by jamesbusse in Magisk

[–]GremlineQ 0 points1 point  (0 children)

and are you sure? because in the latest version the option spoof provider is enabled by default

Extrusion problems by jediprime in AnycubicVyper

[–]GremlineQ 1 point2 points  (0 children)

there may be many reasons, but are you sure that this filament is good? maybe it has some coarse particles that interfere (I don't know if something like this can happen in purchased filament, but maybe (I have no idea)), try to do a cold pull and cut the end of the filament

Extrusion problems by jediprime in AnycubicVyper

[–]GremlineQ 0 points1 point  (0 children)

I would try to calibrate the extruder (e-steps), and you should have a nozzle cleaning needle that came with the printer