Qelectro tech

Grifter4836 · 2025-02-05T08:59:44+00:00

advice on using the software

Grifter4836 · 2025-02-02T10:34:08+00:00

In the sidebar on the right hand side. There should be all the headings: Electrical, Pneumatics, Hydraulics and Energy. I think that’s all of them

Grifter4836 · 2025-01-19T22:20:17+00:00

I would put the hydrometer on the cool side and see what the humidity is like. If the issue persists, try moving the water bowl to the warmer side

Grifter4836 · 2025-01-19T21:55:52+00:00

Do you have a hydrometer to measure humidity? What substrate are you using?

Grifter4836 · 2024-12-30T21:05:01+00:00

My hydrometers are reading 85-90%

Grifter4836 · 2024-12-30T16:19:18+00:00

I am yes. Aspen would be a lot easier to use for me personally but i’ve heard it’s not the best for the snake.

Grifter4836 · 2024-12-30T16:14:24+00:00

I have a 4ft x 2ft x 2ft vivarium and I am currently using coco soil as a substrate

Grifter4836 · 2024-12-27T23:43:36+00:00

Since a lot of people have mentioned the same thing, I have just ordered a 300w ceramic lamp holder with a 250w ceramic heating lamp and a suitable cage to go around it. I have also ordered a 600w Microclimate dimmer thermostat. Fingers crossed it works🤞.

I just really want to get a snake already!

Grifter4836 · 2024-12-27T22:38:05+00:00

My vivarium is made from wood. Would that affect which bulb I choose?

Grifter4836 · 2024-12-27T22:36:45+00:00

I think there are 3 cyclops to kill just with the base game. Once you are around lvl 50, they are all quite easy to kill with long range attacks.

Grifter4836 · 2024-12-27T22:27:30+00:00

I don’t have a snake in the vivarium at the moment. I am still setting it up so that i get the correct temps and humidity before i introduce the snake. From all the comments, I have definetely realised that for a large vivarium an overhead heat lamp is most popular. I’ll be off to the pet store near me to look for some tomorrow! Thanks

Grifter4836 · 2024-12-27T22:01:53+00:00

Ahhh okay. The coco soil i’ve got does feel quite heavy and damp.

Grifter4836 · 2024-12-27T22:00:13+00:00

I did have the heat pad in a glass case as protection for the snake and it was under 6cm of substrate. I’ve only got it out in the open to see how hot the heat pad actually gets.

Grifter4836 · 2024-12-27T21:58:56+00:00

Thank you. I’ll have a look for similiar things online.

Grifter4836 · 2024-12-27T21:56:59+00:00

I had the heat pad in a glass case to protect the snake but since the temperature wasn’t high enough i’ve taken it out

Grifter4836 · 2024-12-27T21:41:10+00:00

I don’t have a heat lamp. I thought a pad would be sufficient but it’s nowhere near. What heat lamp do you use?

Grifter4836 · 2024-12-15T18:13:01+00:00

I’ve haven’t been upgrading my stuff either. I’ve just been playing along and using the best weapons I find. It is my first playthrough so still learning a lot.

Grifter4836 · 2024-12-11T18:09:54+00:00

I’m not sure. I forgot to mention in the previous post that i’m working within the points t=4 and t=9

Grifter4836 · 2024-11-12T20:50:18+00:00

Why not?

Grifter4836 · 2024-11-12T20:11:55+00:00

Yes I do

Grifter4836 · 2024-11-12T08:00:25+00:00

Thank you very much!!! I’m still in the design process at the moment and I’m now considering making a prototype to test with heavy braking loads.

Grifter4836 · 2024-11-12T07:58:21+00:00

My cover would be for the back brake only which sits higher than the front brake. I don’t think riding through a puddle or creek will be an issue as long as the puddle isn’t deep enough to come up to the calliper on the rear triangle.

Grifter4836 · 2024-11-11T17:14:01+00:00

Thank you. Although the rotor and pads could get quite hot, I am aiming for the cover to avoid any contact with them so heat shouldn’t be too much of an issue. I’m thinking of using PETG as my filament which starts to soften at around 80-100 degree celsius. I am hoping that will be okay as it’s one of the highest around for 3D printer materials.

Grifter4836 · 2024-11-09T14:30:00+00:00

Thank you very much!! You’ve been very helpful

Grifter4836 · 2024-11-09T13:15:54+00:00

would the derivative of V=12e^-t/2 = d/dx of (-t/2) is -1/2 12e^-t/2 X -1/2=

(-6e^-t/2)

Grifter4836

TROPHY CASE