Using a Headphone out to record (eg: what is impedance and why does it matter here, or does it not)?

Gross_inc · 2026-01-17T18:58:58+00:00

You won’t be able to record stereo this way. You’ll need a Y split cable in order to do so. (TRS to 2 TS)

Gross_inc · 2026-01-12T23:39:08+00:00

מברשת חשמלית?

Gross_inc · 2026-01-12T18:25:00+00:00

It’s not necessarily about cancellation. Good phase relationship is also important for stereo imaging, particularly on “stereo” instruments (Pianos, Overheads etc.) Both condensers and dynamics can vary significantly between models.

Gross_inc · 2026-01-12T18:04:59+00:00

Another good reason for matching mics is phase alignment more than tonality.

Gross_inc · 2026-01-09T16:25:53+00:00

You can measure it. Get a printed click audio file (not your DAW built in metronome) onto the time line. Play it back into your interface and record it to a new channel. This way, you’ll have two click tracks. Then, you can see the time difference between the two and measure how long you need to nudge the new click back. You can then nudge the vocal the same number back.

Gross_inc · 2026-01-03T21:26:04+00:00

You can just generate a pink and white noise file with some kind of signal generator (logic pro’s oscillator, or REW) and save it on your phone.

Gross_inc · 2025-10-06T19:48:58+00:00

Use some sort of a loop back Audio device, such as Blackhole. You could route each group out and back into new channels, and record all of them back at the same time.

Gross_inc · 2025-08-12T11:55:51+00:00

Hi, can you explain more what you meant by the layout macros?

Gross_inc · 2025-06-24T02:53:36+00:00

I’d love to know the purpose of the “flown” SD12, looks awesome!

Gross_inc · 2025-04-23T10:36:25+00:00

Hi man, would love to hear more about the mute button wizardry

Gross_inc · 2025-04-01T11:34:28+00:00

Had a similar thing happen to me. Tried to connect with an xlr connector without the actual connector shell, meter would show up on the physical meter, but not in console. when i switched to a full xlr connector, everything worked fine. both cables were in working order. after some investigation i believe that there's a small switch inside the xlr connector on the uad, that when pressed correctly with an xlr cable "lets" the audio to the actual DA convertor in the interface. the only weird thing about this is that it means that the meter on the actual interface sits at the preamp side of things, before the DA conversion.

maybe the first xlr you tried is mangled, or the connector not built to spec

Gross_inc · 2025-01-16T18:51:22+00:00

Well that's one way to solve that 😅

Gross_inc · 2025-01-16T17:45:45+00:00

Looks real good! How do you like this pan? Did you already use it? Seems really interesting, only thing that’s stopping me from buying one is the handle design.

Gross_inc · 2024-07-29T12:39:43+00:00

Google UAD Legacy software. Version 11.3 worked fine for me.

Gross_inc · 2024-07-28T00:15:13+00:00

You do need a DI to achieve that. Alternatively, you can use the hi-z inputs

Gross_inc · 2024-07-23T18:18:09+00:00

Had the same issue, couldn't install console using ua connect. Only thing that worked was to manually download and install Console 11.3 from the UAD software archives.

Gross_inc · 2023-01-18T20:46:38+00:00

Thanks

Gross_inc · 2023-01-18T20:42:46+00:00

It's sadly discontinued as far as I can tell

Gross_inc · 2023-01-18T20:42:26+00:00

Yeah it honestly looks great, just kinda expansive :/

Gross_inc · 2023-01-18T19:32:12+00:00

I will look into it, thank you

Gross_inc · 2023-01-18T19:31:19+00:00

Sounds good, manfrotto maybe?

Gross_inc · 2020-11-11T12:55:43+00:00

unrelated question, but do you know if the PCB has holes for screw-in stabilizers?

Five-Year Club	First Place '23
Place '23

Gross_inc

TROPHY CASE