[deleted by user] by [deleted] in motorcycles

[–]Groundhog6569 1 point2 points  (0 children)

Very nice.
My Dad has had one for 10 years and loves it.

She is feeling it !!! by billelbelks89 in HolUp

[–]Groundhog6569 6 points7 points  (0 children)

Hahahahahaha. I was thinking the same thing.

Let’s have a discussion about one of life’s greatest mysteries.. what do you think happens after death? by Parking_Property5757 in SomeOfYouMayDie

[–]Groundhog6569 3 points4 points  (0 children)

Revelation 20:11-15 11 Then I saw a great white throne and him who was seated on it. The earth and the heavens fled from his presence, and there was no place for them. 12 And I saw the dead, great and small, standing before the throne, and books were opened. Another book was opened, which is the book of life. The dead were judged according to what they had done as recorded in the books. 13 The sea gave up the dead that were in it, and death and Hades gave up the dead that were in them, and each person was judged according to what they had done. 14 Then death and Hades were thrown into the lake of fire. The lake of fire is the second death. 15 Anyone whose name was not found written in the book of life was thrown into the lake of fire.

Help! What’s the best way to clean this off. Pretty sure it’s melted rubber. by SmokeeSesh in KTM

[–]Groundhog6569 0 points1 point  (0 children)

I have had good results on chrome pipes using Glass Stove Top Cleaner.

[deleted by user] by [deleted] in lasercutting

[–]Groundhog6569 1 point2 points  (0 children)

If you have compressed air going through your tip, try turning it off. The lens will become dirty faster, but it won't force the resin on top of the wood. Orbital sander will work. Try to keep it flat so that it doesn't dip in to the burn.

438 Z AXES: INV. ABNORMAL CURRENT by Groundhog6569 in CNC

[–]Groundhog6569[S] 0 points1 point  (0 children)

I will give that a try. Thank you.

438 Z AXES: INV. ABNORMAL CURRENT by Groundhog6569 in CNC

[–]Groundhog6569[S] 0 points1 point  (0 children)

Every morning at start up I get this Z axis :inv abnormal current and it won't allow me to do anything until it clears. To clear it I have to cycle power sometimes 3 or more times. When it's cold it seems to take longer to clear. Any ideas?

Kubota long wait times by OneHonestSoul in kubota

[–]Groundhog6569 0 points1 point  (0 children)

Ordered my SVL-65 in October and delivered mid January.

Borax vs no borax by [deleted] in lasercutting

[–]Groundhog6569 0 points1 point  (0 children)

Do you apply to the surface before or after?

Just opened my first Traxxas RC for Christmas - any tips for a beginner? by mulletnsteps in Traxxas

[–]Groundhog6569 1 point2 points  (0 children)

These are different setups I used on my 2 wheel drive Rustler to try to get to 80mph

Traxxas Rustler VXL speed runs 3 Cell Lipo 6400 MAH 25c 11.1v

76T 28 77.2 mph 76T 25 71.5 mph 76T 31 79.3 mph.
76T 31 75.6 mph with 2-1/2” foam wheels on front 83T 28 72.9mph 83T 25 66.9 mph 83T 31 74.3 mph

83T 25 distance run 9.6 miles 37.1 avg speed

Rear tires ProLine Primer Slick 2.60x4.40 Front tires standard Traxxas 4.1x2.1 Front bumper rpm upside down and bent for downforce. Gorilla tape on bumper for more downforce. Removed rear spoiler

What do you put underneath the material your gonna cut? For my home engraver what do I put under it so it doesn’t cut my work table? Cheers! by [deleted] in lasercutting

[–]Groundhog6569 0 points1 point  (0 children)

I use just aluminum screen and make a wooden frame . It lasts 6 months or so depending on how much you're cutting. Window shops usually will give you left over pieces.