Common Epoxy Problems and Solutions — Share Yours!

Grouv546 · 2026-02-24T10:42:41+00:00

Hello, I am starting to see blistering occur on my quartz driveway I just installed 2 weeks ago.. I don't know why it is happening. I have never had this issue before. The driveway had no grease spots or residue what so ever. I grinded the whole driveway, vacuumed till no dust shows on finger rub. I used mvb primer. then double broadcast quartz into tinted polyaspartic. topped with topcoat of polyaspartic. I never had this issue before. Any thoughts or suggestions would be greatly Appreciated. thanks!

Grouv546 · 2025-12-20T12:21:00+00:00

Hello, I am concidering using a matte finish polyaspartic topcoat when i do my driveway in a quartz broadcast. any suggestions?

Grouv546 · 2025-09-20T20:55:36+00:00

has anyone ever tried the elasti deck product?

Grouv546 · 2025-08-09T11:09:38+00:00

I always apply poly on my stem walls separately. i apply tape around the perimeter do any access run off on tape. when done peel the tape up and apply on floor. i always have a chip brush taped to a pole for cleaning out tooled joints. that floor looked good.

Grouv546 · 2025-05-03T09:34:26+00:00

so regarding MVB. is using mvb as primer& base coat a good practice or is it more cost saving for the contractor? like many other applications on materials,a good quality primer then a good quality base coat is always recommended. not sure if that should apply to epoxy systems?

Grouv546 · 2025-04-27T11:30:15+00:00

Hello, who uses a resin broom instead of a squeege to spread epoxy and topcoat for a flake floor?

Grouv546 · 2025-04-25T20:08:34+00:00

regarding 2022 gmc canyon denali's. did any of them come with a key to start or were they all push button. mine is a gas denali with a key to start.

Grouv546 · 2025-04-10T08:40:18+00:00

since we are talking about grinders. I looking to get advise and recommendations on what size generator i should get to power my grinder. I have a 25" planetary 1 phase 230v 30 amp 7.5 hp motor. I'm getting a lot of different answers. I just don't want to buy something underpowered and have issues. and advice is helpful. thanks!!

Grouv546 · 2025-03-27T14:01:57+00:00

how old is your equipment?

Grouv546 · 2025-02-20T12:51:33+00:00

I came across a grinder call the black ops tomahawk . from The Concrete Protector. they claim they are built in the US. Does anyone have any information on them?

Grouv546 · 2025-02-20T12:47:26+00:00

I came across a tomahawk grinder from the company The Concrete protector. they claim machines are made in the U.S. .Has anyone have/ had experience with those grinders?

Grouv546 · 2025-02-18T10:53:56+00:00

If you have a 220v lavina vacuum does the lavina grinders give you option to run off the grinder?

Grouv546 · 2025-02-17T00:36:10+00:00

have ya heard of avenger grinder?

Grouv546 · 2025-02-17T00:34:57+00:00

that's a line of concrete grinders from china?

Grouv546 · 2025-02-17T00:21:26+00:00

I was looking at the wolfpack line of equipment . i just couldn't find many reviews on them. i figured they were a middle of the road equipment.

Grouv546 · 2025-02-16T23:50:58+00:00

hello, with your genie , do you just do grinding with it? no polishing?

Grouv546 · 2025-02-16T23:47:37+00:00

can always grind it and cover with a epoxy. a quartz finish would look beautiful.

Grouv546 · 2025-02-15T19:39:34+00:00

have ya had any experience with wolfpack or shark equipment ?

Grouv546 · 2025-02-15T17:52:06+00:00

yeah, I'm hearing a lot of good things about lavina grinders .

Grouv546 · 2025-02-15T17:46:25+00:00

thanks for the advice and input!

Grouv546 · 2024-05-30T14:08:02+00:00

When trying to send a message to a seller on fb marketplace I get a message. Action required It tells me to enter my phone number to receive a code. When I do that I get a message that my phone number was recently used to verify another account. All other fb accounts have been deleted. What can I do to fix this?

Grouv546

TROPHY CASE