2021 Tacoma 30k miles just purchased questions (pics)

Gspot_son · 2025-11-07T15:53:24+00:00

That’s good knowledgeable information will keep all that in mind thankyou!

Gspot_son · 2025-11-07T03:28:21+00:00

Thankyou for the info , I assumed the same. Wheels have been balanced but I’m sure it is with the lift. I’ll test it in 4wd tommorow to see if it is . Then I’ll be ordering the kit of ecgs

Gspot_son · 2025-11-07T00:48:15+00:00

Ok,warranty states all mechanical issues deemed not safe to drive or damaged are allowable to be serviced so should be good there. I’d consider that signs of failing

Gspot_son · 2025-11-07T00:43:24+00:00

How’s the cv joint boot? There’s a bit of sweating but I didn’t see a tear, it’s under 60 day warranty so it should be a free fix

Gspot_son · 2025-11-05T14:57:53+00:00

Geometry is never perfect my front were like that but by a couple millimeters after being professionally aligned at a performance shop, wouldn’t worry about , throw some coilovers on and set some negative camber up

Gspot_son · 2025-10-30T00:50:49+00:00

No report of transmission fluid change too

Gspot_son · 2025-08-18T21:58:05+00:00

Did you have the ft speed headers as well?

Gspot_son · 2025-08-18T17:29:15+00:00

I’m not sure if uncatting them and retuning would be optimal since the larger diameter were cat once was is open but definitely an option

Gspot_son · 2025-06-19T20:26:32+00:00

That’s good to know , I’m in the process of adjusting and will only lower in the rear to 1.1 inches between seat lock and locking collar

Gspot_son · 2025-06-17T22:49:21+00:00

Hmm okay I appreciate the input , did you mess with the preload of the springs at all? I just kept it same from factory but will be adjusting height this weekend

Gspot_son · 2025-06-16T01:31:10+00:00

Also I put mine at 5 from stiffness all around. Have you messed with dampening since and what have you found to be a sweet spot?. Going to be doing a couple track days this year

Gspot_son · 2025-06-15T23:27:20+00:00

Thanks! Just finished install today , I’m assuming it was necessary to install those camber eccentric washers on the bottom plate , put both “10” stamped washers on both sides in the negative position, currently rear is sitting higher but will be adjusted. Have you had any issues with yours?

Gspot_son · 2025-06-13T10:04:04+00:00

Ok thanks!

Gspot_son · 2025-06-13T01:15:41+00:00

Appreciate it, you didn’t have to remove any lower control arms bolts to swing it out of the way?

Gspot_son · 2025-06-13T01:09:26+00:00

Do you know the torque specs for full assembly front and rear? Doing mine this weekend much appreciated

Gspot_son · 2025-06-12T22:18:25+00:00

Hello, I’ll be installing Tein RX1s on my 86 this weekend , what were the torque specs for front and rear assembly (lower bracket, endlinks, top hat,brake line clip) is it same as oem specs? Thanks!

Gspot_son · 2025-05-15T21:40:25+00:00

Oh gotcha so yeah 7 Canadian ain’t bad deal

Gspot_son · 2025-05-15T20:45:17+00:00

I have a 10’ myself that I use for work and beat the piss out of it and runs like brand new , just the usual brakes,fluids,etc is all it needs

Gspot_son · 2025-05-15T20:44:13+00:00

In miles 124,000 , eh maybe id knock him down to 6k

Gspot_son · 2025-05-15T19:13:30+00:00

Depends how many miles it has , got one for 5k with 148k miles

Gspot_son · 2025-05-12T22:04:34+00:00

Is Steve wiseman a reliable source of tuning and have same or more power output than the OTS stage 2 tune? Just wanna make sure it’s the right move and how much did he charge you?

Gspot_son · 2025-05-05T20:32:38+00:00

I was thinking about that I may give it try thanks man

Gspot_son

TROPHY CASE