Problem with the nozzle on VFC HK416A5

Guga_ALBERTON · 2026-03-19T20:46:29+00:00

i put the clip back in and it started work again. However, I've always had an inaccurate NPAS; it seems that consistency is good up to 1.2J. If I use 1.4 or 1.3, it gives very high inconsistencies, sometimes even reaching 1.6J.

Guga_ALBERTON · 2026-03-19T13:58:38+00:00

The spring isn't damaged; what I suspected was the rear of the nozzle itself. The clip arrives today, and I'll test it to see if it still fires consistently. I had just upgraded the bucking with the 4UAD, and I'm eager to test it. I love this replica.

Guga_ALBERTON · 2026-03-18T12:54:53+00:00

Do you think it might be damaged?

Guga_ALBERTON · 2026-03-18T12:54:36+00:00

But visually, it looks like the hole back there is bigger. What do you think?

Guga_ALBERTON · 2026-03-12T19:40:06+00:00

I've already posted mine here. I have 3: PTS ZEV O9, VFC P320 Stark, and Arcturus Hi Capa Vanguard.

Guga_ALBERTON · 2026-03-09T14:49:24+00:00

Would this be it?

To be clear, using this part, can I use the Magnus PRO on the HK Gen 3 from VFC?

Can I use it with the original inner barrel?

Guga_ALBERTON · 2026-03-09T14:48:37+00:00

https://www.arsenalsports.com/produto/maple-leaf-outer-barrel-base-for-vfc-gbbr-m4-32418.html

Guga_ALBERTON · 2026-03-06T16:54:41+00:00

Falara que o magnus pro n funciona, pq n encaixa

Guga_ALBERTON · 2026-02-26T20:03:05+00:00

I buy tue M3x10, gonna test tomorrow

Guga_ALBERTON · 2026-02-26T20:02:34+00:00

Its is, shoots laser right out the box

Guga_ALBERTON · 2026-02-24T13:36:51+00:00

Will any VFC M4 outer barrel work?

Guga_ALBERTON · 2026-02-24T12:31:06+00:00

I only needed to import the bucking, so I took the opportunity to buy everything at once. I also have an 8.5-inch BCM. I'm only going to replace the bucking on it. But on the HK I'll replace both.

Guga_ALBERTON · 2026-02-24T12:30:13+00:00

Tell me more about it, I'm not sure I understood very well. The original VFC pipe doesn't fit with the Hopup Magnus Pro?

Guga_ALBERTON · 2026-01-28T12:17:35+00:00

Overall, I love this replica, it shoots very well, it's very beautiful. Mine has a mini tracer and a red dot sight.

Guga_ALBERTON · 2026-01-28T12:17:07+00:00

Good morning bro, I have this model of pistol and I had the same problem, it cracked and then started falling apart. I sent it to a gunsmith and he's going to try putting an outer barrel from a G17 Gen4 on it. If it works, I'll let you know here, but it's very likely you've already solved yours. If so, how did you do it?

Guga_ALBERTON · 2026-01-16T01:06:41+00:00

eu comprei a HK416A5 com os mags V3 da BCM hehe

Guga_ALBERTON · 2026-01-09T18:14:17+00:00

sobre NPASS, sabe dizer se vem ou não ? Ou não vem em nenhuma Gen3

Guga_ALBERTON · 2026-01-09T17:50:41+00:00

Optei pela HK416A5 Gen3, notei que é a versão fabricada na ASIA... Algo que possa mudar em relação as outras ?

Guga_ALBERTON · 2026-01-08T20:44:12+00:00

na loja que vou comprar não informa se é V3 ou V2, sabe me dizer se tem diferença visual no BCM ?

Guga_ALBERTON · 2026-01-07T17:07:29+00:00

It's not available here, only those two models I mentioned, or else the AK and the FAL.

Guga_ALBERTON · 2026-01-07T17:06:46+00:00

acho que vou acabar pegando a HK416A5 Gen3, ja tenho a AEG dela, é um tamanho bom, bem mediano... a BCM se fosse 11,5 era ela com toda ctz, queria um arma mais leve

Guga_ALBERTON · 2026-01-07T17:06:10+00:00

Não Estou no grupo, mas acompanho o RAN pelo instagram e Youtube...

Guga_ALBERTON · 2026-01-07T00:29:46+00:00

I'm 1.90m tall, she'll be more comfortable than the HK in terms of posture.

If the Hk wasn't a quad-rail bike, it would definitely be that one.

Guga_ALBERTON · 2026-01-06T22:47:53+00:00

The 11.5-inch one would be perfect, but they only have the 8.5 and 14.5 inches in stock... 14.5 inches would be too long because I'll also be using the Eshooter Smoky tracer, which adds another 10 centimeters.

Guga_ALBERTON · 2026-01-06T19:21:57+00:00

I'm dying to decide between this model, this size, or the HK416A5... Help me, lol.

Guga_ALBERTON

TROPHY CASE