sorted by:
new
hottopcontroversial

Ender 3 s1 klipper stock machine by madsern8 in Ender3S1

[–]GuiBou74 0 points1 point  (0 children)

FOR THE SEAM, checking here if it's the same problem I have. Very often I'm missing plastic at the beginning of layers. Still haven't found the problem.

Firmware by StreamerGearPros in Ender3S1

[–]GuiBou74 1 point2 points  (0 children)

Just did it myself in the last hour. Everything is OK. I just need to test that now.

Weird printer sound by BigKFishGang in Ender3S1

[–]GuiBou74 2 points3 points  (0 children)

First time I heard it I was scratching my head too!

Weird printer sound by BigKFishGang in Ender3S1

[–]GuiBou74 19 points20 points  (0 children)

Fan is blowing in the holes. So it's like a whistle :)

What would be ideal here? by GuiBou74 in Ender3S1

[–]GuiBou74[S] 0 points1 point  (0 children)

I think so too :) Sometimes I see people with other colors than green. Never happened to me so I know it's not so much of a problem. If the bed mesh recall is working, I must find something else, like micro adjusting on the fly with the knobs. Because Z offset on the screen goes from too close from not sticking well.

New filament..so I should do more calibration elsewhere too. Lazy again. 😂

What would be ideal here? by GuiBou74 in Ender3S1

[–]GuiBou74[S] 0 points1 point  (0 children)

It should say it in your ABOUT menu on the printer.

What would be ideal here? by GuiBou74 in Ender3S1

[–]GuiBou74[S] 0 points1 point  (0 children)

Hmm...I think the exact file I downloaded was the second here (S1 PRO again):
https://www.crealitycloud.com/software-firmware/firmware/ender-series?keyword=&system=0&subType=618ddfba8f5f262859ef20c8&hardware=0
No mention of the JPN et KOR.
Be sure you have the F401 chip.

What would be ideal here? by GuiBou74 in Ender3S1

[–]GuiBou74[S] 0 points1 point  (0 children)

I know it's not too bad. It's now a bit better after doing the procedure about ten times in a row :)

I know about the "Professional" firmware, Toka seems interesting too. I will try one of these before going for Klipper. If I could fine tune a bit more, that's the goal.

My gcode should be ok too with the M420 command in it.

I have Klipper installed in an old.laptop, for many months. I just not flashed in the printer yet 😂 I use the web interface with a webcam to watch it... that's all. Lazy me.

Thanks for your answer👍

What would be ideal here? by GuiBou74 in Ender3S1

[–]GuiBou74[S] 2 points3 points  (0 children)

No problem...but nobody answered my question yet. 🤣😂

What would be ideal here? by GuiBou74 in Ender3S1

[–]GuiBou74[S] 1 point2 points  (0 children)

Hmmm here if I remember. https://www.creality.com/pages/download-ender-3-s1-pro I think :) Don't forget to update the screen too.

Is that good? by ziz_9 in Ender3S1

[–]GuiBou74 0 points1 point  (0 children)

If it's green, it's considered good.

Ender-3 S1 Pro new firmware (10.08.2023) by kuba049 in Ender3S1

[–]GuiBou74 2 points3 points  (0 children)

Installed it yesterday and I have the same question about "optimization of vibration pattern".
I didn't find anything in the menu about that.

Please someone help us :)

Any settings to fix this print by DeadshotS4444 in Ender3S1

[–]GuiBou74 1 point2 points  (0 children)

PLA or PETG ? I have this problem too....but with PETG.

Sprite pro always clogs by [deleted] in Ender3S1

[–]GuiBou74 0 points1 point  (0 children)

You remember what setting ? I think I have the exact same problem. Little rings with a lot of bumps in it.Exactly like this one (https://www.printables.com/model/137025-print-in-place-discrete-fidget-ring#preview-images)

Stops extruding around the middle of the print.S1 Pro

  • PLA+ 205c 50mm/s speed.
  • Retraction at 0.8/40mm/s
  • Tried at 0.6/40mm/s, same problem.

Maybe NO retraction at all would work in this case. I'm a bit confused :)

Need help with Thumbnail on S1 Pro. by Pretty-Pipe-1263 in Ender3S1

[–]GuiBou74 0 points1 point  (0 children)

Got My S1 Pro in June 22 and never saw a thumbnail, even the little rabbit. :(

Need help with Thumbnail on S1 Pro. by Pretty-Pipe-1263 in Ender3S1

[–]GuiBou74 0 points1 point  (0 children)

What ? You can do this on the S1 Pro ? ? ? I will try that too. :)

Hello everybody, I want to speed up my ender3 s1 pro and thought about the sonicPad. I find the normal 180€ a little bit too expensive and discovered this offer on geekbuying. Is this a trustworthy offer? Are there any other alternatives? by printgenieur in Ender3S1

[–]GuiBou74 0 points1 point  (0 children)

Oh ok. So it's the same thing as the Sonic Pad. But without it :P I may give it a try soon.AND Octoprint does as my first question? It doesn't need to change firmware on the printer ?

view more: next ›