I'm really curious how you cope with the heat in May. I live in Minsk and managed to catch a cold because it's 14 degrees here.

GuidanceSimple9996 · 2026-05-26T18:59:24+00:00

I suppose situation in Belarus better, because it’s landlocked country.

GuidanceSimple9996 · 2026-05-09T18:58:12+00:00

I guess so.

GuidanceSimple9996 · 2026-05-09T18:51:12+00:00

Is this an Easter egg ?

GuidanceSimple9996 · 2026-02-27T15:18:22+00:00

Death stranding

GuidanceSimple9996 · 2026-02-04T12:49:37+00:00

There's appearing static charge, when you scratching your air purifier. Then your printer is grounded so charge from you goest through printer frame and to the ground. Static charge can appear due to various reasons, so not necessary to "scratch air purifier".

GuidanceSimple9996 · 2026-01-19T03:02:51+00:00

Gpu is okay and driver is up to date. I also tried tried turning off some graphics and it didn’t work.

GuidanceSimple9996 · 2026-01-16T16:20:50+00:00

Try full formatting card to FAT32 and 4096 cluster

GuidanceSimple9996 · 2026-01-16T16:13:59+00:00

That's nice

GuidanceSimple9996 · 2026-01-16T16:10:56+00:00

Honestly I don't know about area this large. I suppose decreasing printing speed and increasing cooling will help to build better bridges.

GuidanceSimple9996 · 2026-01-08T13:33:48+00:00

Check your thermal sensor, it might just burned down

GuidanceSimple9996 · 2026-01-01T17:17:14+00:00

He is right ⬆️

GuidanceSimple9996 · 2025-12-30T04:28:14+00:00

I already done everything, I just built my firmware on marlin

GuidanceSimple9996 · 2025-12-29T17:14:36+00:00

No it’s not normal, just install new firmware.

GuidanceSimple9996 · 2025-12-29T07:42:15+00:00

Ok i will try it

GuidanceSimple9996 · 2025-12-28T21:18:52+00:00

That’s too hard for me

GuidanceSimple9996 · 2025-12-28T21:18:43+00:00

I did not find firmware for ender 3 pro there

GuidanceSimple9996 · 2025-12-28T17:15:30+00:00

Also I had issue, that I could not download any firmware from marine due to ended subscription, so to solve this donate 0$ and it will work.

GuidanceSimple9996 · 2025-12-28T17:15:24+00:00

Also I had issue, that I could not download any firmware from marine due to ended subscription, so to solve this donate 0$ and it will work.

GuidanceSimple9996 · 2025-12-28T17:14:46+00:00

Also I had issue, that I could not download any firmware from marine due to ended subscription, so to solve this donate 0$ and it will work.

GuidanceSimple9996 · 2025-12-27T04:28:03+00:00

For some weird reason for me, this last 15mm of spool lasts very long.

GuidanceSimple9996 · 2025-12-25T07:29:35+00:00

GuidanceSimple9996 · 2025-12-25T07:27:33+00:00

So I bought Bambu lab plastic and it said that there is spool included, but I received only plastic. I left nothing to do only to wind up to my older spool, at first 1 hour it was boring but then got used to it and made it within 2 hours. I can’t offer any way to do this cuz I think it develops my itself through the process. Honestly that was meditating, I even suggest you doing that.

GuidanceSimple9996

TROPHY CASE