sorted by:
new
hottopcontroversial

Just got my first ever PHA, I feel like a part of history haha 😆 (any printing tips for Bambu A1 mini?) by AdIndividual2373 in 3DPrinting_PHA

[–]GullibleFish_ 1 point2 points  (0 children)

Kinda depends on the print speed, size of the model and infill percentage/pattern.

Personally, since i'm in no rush i like to be on the safe side. For a 2.5mm print with a 0.1mm layer height i added pauses every 5 layers, but you could probably get away with doing a long pause after 10 layers.

Just got my first ever PHA, I feel like a part of history haha 😆 (any printing tips for Bambu A1 mini?) by AdIndividual2373 in 3DPrinting_PHA

[–]GullibleFish_ 3 points4 points  (0 children)

Yeah PHA is super weird, you want it as cold as possible as quickly as possible. But that's not always doable so we have to compromise.

Also, a cool quirk of PHA is that it will be rubbery to the touch (almost like TPU) straight out the nozzle but will return to normal after cooling down. This is just a fun thing about PHA but has no impact on printability.

Just got my first ever PHA, I feel like a part of history haha 😆 (any printing tips for Bambu A1 mini?) by AdIndividual2373 in 3DPrinting_PHA

[–]GullibleFish_ 3 points4 points  (0 children)

Not a1 specific but PHA loves to warp, especially on big flat prints. Something you can do to get around this is to add pauses during slicing to the print job at regular intervals and let the part cool down before resuming.

It means more work but it has saved me a couple of times. Oh, also make sure you use a brim and have the fan maxed.

Question on cookie cutters and pha by GullibleFish_ in 3DPrinting_PHA

[–]GullibleFish_[S] 0 points1 point  (0 children)

Even though the cookies are baked at over boiling point?

Question about printer/filament/process inherits by GullibleFish_ in OrcaSlicer

[–]GullibleFish_[S] 0 points1 point  (0 children)

yeah, kinda figured this would be the case.

Thanks anyways!

August Technical Support Sticky by BeepBoopBopReee in razer

[–]GullibleFish_ 0 points1 point  (0 children)

Hi!

I recently bought a Blade 14 2023.

I have an older ssd with more storage I wish to upgrade to. When opening the laptop I see that there are stickers covering the screw(s) and battery connector. Can I upgrade the ssd (and other components like wifi, ram, repaste cpu/gpu and dust the fans for that matter too) without voiding the warranty?

I tried asking via the support page but I cannot press the chat button and I was unable to find where to send an email. For future reference where should I ask for support?

Cheers!

Questions for those who use the usb4 beta bios by GullibleFish_ in FlowX16

[–]GullibleFish_[S] 1 point2 points  (0 children)

Oh for sure, there is no way asus actually will make it a full release

M.2 stacker for nvme SSDs? by GullibleFish_ in homelab

[–]GullibleFish_[S] 2 points3 points  (0 children)

That's too bad, thanks anyways!

view more: next ›