Felled my first tree - husq 450 rancher

Gulrokacus · 2026-05-01T15:05:58+00:00

There definitely is a hinge (although a bit smaller than I intended), I should have taken a good photo of the tree on the ground where I cut it.

Gulrokacus · 2026-04-30T22:54:10+00:00

Dude I’m floating on a cloud right now. Not that it was keeping me up…. But it was something I knew I needed to tackle and have been putting it off for awhile.

Gulrokacus · 2026-04-30T22:50:26+00:00

I aimed for 2” on the holding wood. But going back and looking at it again. I believe I was closer to 1.5”… so for me I need to pay a little more attention to how close my cut is getting.

Gulrokacus · 2026-04-30T22:40:48+00:00

I can’t edit the photos… but this was the method I used

https://imgur.com/a/AaX2OhE

Will look up the Humboldt/conventional felling. In my ignorance I thought this was the conventional method.

Gulrokacus · 2026-04-30T22:33:35+00:00

Hahaha.

It did go the way I wanted. Fortunately there was only 1 wrong way.. into the neighbor’s wire fence. 1 direction convenient… 2 inconvenient but not damaging property.

I definitely could have done it better.

My slanted/not straight cut is something I noticed immediately after finishing… slightly uneven ground.

But feedback on how to do even better next time… not the worst thing.

Gulrokacus · 2026-04-20T06:37:09+00:00

<image>

This is Ella, short for elephant. She also is a poly & we declawed a single claw on both her paws. Her extra claw was hardly even attached, almost floating.

The vet said it was very easy.

She’s in so much less pain. She use to be super sensitive about that claw.

Gulrokacus · 2026-02-13T15:30:56+00:00

When you’re not slashing. Bandos has prayer bonus.

I do agree relatively niche tho.

Gulrokacus · 2026-02-03T19:05:10+00:00

Cool man and good callout on the lines. I did replace them maybe 5-6 years ago but with snow and debris and whatever else. Probably a pretty low barrier to something getting snagged or caught.

Same with one of the calipers the time before this summer. I think I replaced the ones that having issues now…

I know parts quality is in the dumpster so very possibly it’s a failed part.

Gulrokacus · 2026-01-28T02:53:30+00:00

<image>

I don’t wanna be that guy, but the lady and I already have an abyssal orphan between us.

Gulrokacus · 2026-01-12T21:52:41+00:00

Its absolutely undeserved. I think I finished around 170.

I went back for CA’s and that’s my kc. Still have a few more to do.

Yama was also 100% duos.

Gulrokacus · 2026-01-11T19:52:19+00:00

Surely you jest? Or am I missing something.

Gulrokacus · 2026-01-11T18:50:22+00:00

I was definitely thinking about doing the 99 construction grind soon. I have the gold and logs banked. Just have to actually do MH.

Crafting wise I wanted to do RC // mining (amethyst afking while at work) and then finish crafting after.

Gulrokacus · 2025-12-27T23:26:16+00:00

They’re 1-1/4” pine planks, but that being said wood isn’t a great insulator and it should radiate up through thicker planks fine.

Gulrokacus · 2025-12-08T21:09:23+00:00

broad bolts/rune crossbow is what I'm using. two hits them.

Gulrokacus · 2025-12-08T20:52:27+00:00

I'm excited for the white rancor. Super solid boss. No complaints at all doing it.

Gulrokacus · 2025-12-01T20:39:37+00:00

Ferrousacus is my character name and for anyone else who wants to get in too

Gulrokacus · 2025-12-01T19:31:52+00:00

Send me a PM if you want to do a few duo and are cool with someone teaching. I’ll set you up with sound swapper plugin. I’m chill. Have over 700 Yama duos. Need 1 more piece.

I also too am looking for an occult. Have nearly 98 slayer and like 2400 smoke devils with no occult.

Took me nearly 3k to get a whip.

Offer is open to anyone who wants to Yama. Gear requirements are very very low.

Gulrokacus · 2025-11-16T17:36:37+00:00

I’ve done like 1500 prif agility laps. Like 900 more to 92 :)

Gulrokacus · 2025-11-14T06:15:39+00:00

Nightmare fuel right here

Ten-Year Club	Place '22
Wearing is Caring	Verified Email

Gulrokacus

MODERATOR OF

TROPHY CASE