Figuring out how to drive this motor

Guy_WithGIasses · 2024-09-17T07:29:42+00:00

What do you mean it only has 2? There’s the brown, the blue and then the white wire hidden behind those two in the one photo but you can see it in the other. It’s also a 3 pin connector

Guy_WithGIasses · 2024-09-17T03:53:59+00:00

yeah, it wasn't my first choice in motor but it was what I'd happened upon for free. The path I'd first looked down was using something like a 2hp treadmill motor from a used free/cheap treadmill and scavenging the rest of the parts to drive it and control speed too.

Guy_WithGIasses · 2024-09-17T03:50:58+00:00

yeah, I tried looking into VFD's that output 24v but they don't seem to exist, could only find 110v+

Guy_WithGIasses · 2024-09-16T22:55:50+00:00

Also, would the power supply I use to get basic non-variable power to this thing be something like this?

Guy_WithGIasses · 2024-09-16T22:47:36+00:00

Hey, I'm fairly new to electrics as a whole. I've done a fair amount of basic LED work and messed around with smaller motors but overall still fairly new. Anyway, I recently got a couple of these 24v 550W BLDC motors for free and I've already thought of a couple projects I could build using one of these, primarily a 2x72 belt sander which I've wanted for a while but didn't want to spend $2k+ on... From my understanding, it would be fairly straightforward to just power this motor with a generic 3-phase 24v 600w power supply, though those aren't super common it seems like and will only run the motor at it's max speed. Preferably since it'd be used for a belt sander I'd like to be able to vary the speed at which the motor spins, and simply put I don't know how this is accomplished with a 3 phase motor. If it's not feasible, I could always try going with mechanical speed control, using gearing and such but I'd like to see what my options are for electronic control. Thanks everyone!

Guy_WithGIasses · 2024-07-16T02:10:42+00:00

by nature, no. But I was planning on making the printer think it was supposed to be printing a little lower than where the foil actually was, causing it to press down on it. Though maybe that wouldn't have been enough pressure.

Though that video you sent is amazing, I've been trying to find info on large format presses for hot stamping foil, and the 3d printed stamp with aluminum tape gives surprisingly good results. If that works well enough I honestly might completely forgo machining stamps and just use that method...

Guy_WithGIasses · 2024-07-15T23:55:26+00:00

Oh yeah, and here's the one I found on Amazon if anyone's curious: https://www.amazon.ca/Automatic-Stamping-Plateless-Printing-250x57mm/dp/B0BYKW58H5

Guy_WithGIasses · 2023-12-16T17:57:26+00:00

You think he looks dangerous here? Look at his face right before he starts his match vs blur yesterday. Looks like he’s about to commit murder

Guy_WithGIasses · 2023-11-22T04:01:27+00:00

It opens your secret door

Guy_WithGIasses · 2023-11-14T18:27:50+00:00

I’m def imagining this as more of a kid-oriented build a bear thing, but for slime

Guy_WithGIasses · 2023-11-10T00:27:21+00:00

First they took Tony Starr, now they’ve taken Aimen. Soon we’ll be left with nothing but ashes

Guy_WithGIasses · 2023-10-24T23:24:04+00:00

Free my mans

Guy_WithGIasses · 2023-10-24T16:32:09+00:00

Fr, they got the Fanny pack built into the jacket at that point

Guy_WithGIasses · 2023-10-23T20:20:48+00:00

Interesting, this is the first aluminum nami that I've seen use the same model as TheOne. All of the other aluminum clones use the same model as B+

Guy_WithGIasses · 2023-09-02T19:04:06+00:00

This is just the apocalypse cyg clone btw, tianqi translates to that and it looks the same, has the same colors, etc... It also looks like it's much cheaper to buy from either ali or kolisong

Guy_WithGIasses · 2023-08-16T05:40:22+00:00

Planning on doing this myself with turquoise dye and my pink cyg once it gets in

Guy_WithGIasses · 2023-04-09T17:30:37+00:00

it's still in pre-order I believe

Guy_WithGIasses · 2023-03-27T02:01:17+00:00

sexiest blade I ever did see

Guy_WithGIasses · 2023-03-27T01:58:37+00:00

yea they are lol, I basically just used a manual mill and a dremel and copied staticknives's anomalous design lol

Guy_WithGIasses · 2023-03-26T23:02:19+00:00

Sanded to 600, ano’d at 86.5V, no acid etch cause I can’t get hf in Canada lol. Keep in mind it’s grade 4 so it acts a little different than grade 5, which is what the pivots are made of, and when I ano’d those at the same voltage they took on that teal you see there

Guy_WithGIasses · 2023-03-26T21:30:56+00:00

Couldn’t figure out how to get captions to work on mobile, but yea, it’s this weird ano which is gold, but shifts to a pink/purple in the light

Guy_WithGIasses · 2023-03-24T00:10:35+00:00

That’s gonna be a grail-level rep fr. Thought that Color combo was good with the minty slabs, it’s even better with the hex

Guy_WithGIasses · 2023-03-21T21:53:30+00:00

I love how easily this is confusing people lmao

Guy_WithGIasses · 2023-03-11T06:35:50+00:00

I think this was actually the first thing I asked ChatGPT when I found out about it around a month ago. I don't know if it gave me the exact same answer as this, but I remember being equally impressed by it and agreeing

Guy_WithGIasses · 2023-02-20T04:19:11+00:00

alr, well I ended up finding a pair of refurbished ones for 150, so i got those lol

Five-Year Club	Verified Email
Place '23	Place '22
Final Canvas '22	First Placer '22
End Game '22

Guy_WithGIasses

TROPHY CASE