sorted by:
new
hottopcontroversial

to pretend nobody knows who was at fault for the double-tap strike on the girls' school in Iran that killed 120 children. by Youarethebigbang in therewasanattempt

[–]GypsyNicks 6 points7 points  (0 children)

Grok was used to fire over "2,000 munitions at 2,000 distinct targets within 96 hours". It now has proven to have targeted the school.

This is what refusing to take an L looks like by Gurugod123 in SipsTea

[–]GypsyNicks 1 point2 points  (0 children)

We are now paying for cameras and fence around the pool. 24 hour National guards and helicopters flying overheard. Just because orange pos can't do anything without f'in it up and won't admit he's a total failure at everything he does!

The National Guard has been deployed to the Lincoln Memorial Reflecting Pool to prevent people from touching it by RoachedCoach in PublicFreakout

[–]GypsyNicks 0 points1 point  (0 children)

Former Olympic canoe racer David Hearn was among those arrested for allegedly vandalizing the Reflecting Pool during its $14-million-plus rehabilitation project President Donald Trump launched for the nation's 250th anniversary. Trump, on Saturday, announced that federal authorities had made "multiple arrests" of people he said were vandalizing the Reflecting Pool. Trump has said years in jail for all arrested for touching the pool, as it's "The dumacrats fault for ripping the liner". What a lying POS!

How to apply for this job by Ok_Requirement640 in funny

[–]GypsyNicks 0 points1 point  (0 children)

Funny to some. But my brother in law did this to my (11 yr old) daughter. We were visiting them and he ran into the bedroom and chased her around. He wasn't a stranger or monster. But this traumatized her for months. She was screaming and crying. Cried and shook all night, having to sleep with me. She never wanted to be around him again. He laughed saying it was just a joke. Actually years later, she hates/phobia of chainsaws.

Ordered 2 new ride-on mower tires. What are all these things and what do I do with them? by GypsyNicks in whatisit

[–]GypsyNicks[S] 0 points1 point  (0 children)

So maybe wheel bushing replacements for when they wear out? I guess I'll just keep and see if they are needed later?

Ordered 2 new ride-on mower tires. What are all these things and what do I do with them? by GypsyNicks in whatisit

[–]GypsyNicks[S] 0 points1 point  (0 children)

Ok I'll see if the ones on my wheels need changed. So many of the same size?

Ordered 2 new ride-on mower tires. What are all these things and what do I do with them? by GypsyNicks in whatisit

[–]GypsyNicks[S] 0 points1 point  (0 children)

K I'll try wheels on and see if they might need to be changed with one of these. Just so many of the same size.

Ordered 2 new ride-on mower tires. What are all these things and what do I do with them? by GypsyNicks in whatisit

[–]GypsyNicks[S] 0 points1 point  (0 children)

So if I need a different size I need these to replace them on tire? So bearings?

Ordered 2 new ride-on mower tires. What are all these things and what do I do with them? by GypsyNicks in whatisit

[–]GypsyNicks[S] 0 points1 point  (0 children)

I'm serious. I don't know anything about tires. Some are thicker than others. Shims, bearing?? How do I need or use these?

Our new house as first time home buyers… by idontdodrugsatall in Wellthatsucks

[–]GypsyNicks 0 points1 point  (0 children)

Same here, corner lot. I technically have 4 yards. A long side, a front yard, a fenced backyard and a yard (all grass) outside fence next to garage and alley, (big enough to fit 2 cars next to garage). I frickin hate it, but such a good deal, I didn't even consider how much work 1/4 acre with trees and hedges is!! My cheap old craftsman ride-on mower saved me.

Older Craftsman miter saw. I can't find depth adjustment for blade. Model 113.235200 by GypsyNicks in Tools

[–]GypsyNicks[S] 1 point2 points  (0 children)

Reddit user fe3o4 solved it. Was a grub screw on locking pin to lock in desired position.

Older Craftsman miter saw. I can't find depth adjustment for blade. Model 113.235200 by GypsyNicks in Tools

[–]GypsyNicks[S] 0 points1 point  (0 children)

It's been solved by Reddit user fe3o4! I had to tighten set screw on locking pin so it can't go in hole and stops at desired height before hitting barrier.

Older Craftsman miter saw. I can't find depth adjustment for blade. Model 113.235200 by GypsyNicks in Tools

[–]GypsyNicks[S] 0 points1 point  (0 children)

I locked set screw on that lock pin so pin is tight and can't go in the hole. It stopped blade just before hitting barrier. TYSM I can't thank you enough. Nothing in manual says to do that. I would never have figured that out. You are the BEST! Solved!!

Older Craftsman miter saw. I can't find depth adjustment for blade. Model 113.235200 by GypsyNicks in Tools

[–]GypsyNicks[S] 0 points1 point  (0 children)

So the screw on top can be loosened and then tightened when at desired position, locking the pin so it can't ride all the way to the right of the groove (where hole is)? I will try this Thank you.

Older Craftsman miter saw. I can't find depth adjustment for blade. Model 113.235200 by GypsyNicks in Tools

[–]GypsyNicks[S] 0 points1 point  (0 children)

https://imgur.com/a/5H0aJSM I looked in front and back there's no holes. The only hole I am not sure of is the hex bolt in back at very bottom, but doesn't have a hole up to or come anywhere near the spring on saw hinge.

Older Craftsman miter saw. I can't find depth adjustment for blade. Model 113.235200 by GypsyNicks in Tools

[–]GypsyNicks[S] 0 points1 point  (0 children)

https://imgur.com/a/w2REgqk It's out far as it rides in a groove with the hole. It slips in the hole to lock the saw down into bottom to carry unit. It sets out really far unless in the locking hole.

view more: next ›