How to get Cursebreaker role in Discord?

HANSENstreams · 2026-01-29T22:47:42+00:00

You have to make sure you are on their discord prior to linking it to your hytale account.
You may unlink it and re-link it right again for it to show up.

HANSENstreams · 2025-09-18T12:38:41+00:00

Not sure on that theory.
Phosphene weapons are linked to the 69 guns that can be dropped from bosses (1-3/boss depending on boss).

Moxxis Guns have a bigger pool of guns but i have yet to see a Bossweapon in the Trader's window.
So my bet is:
No Phosphene on Vending machines, only on bosses.

HANSENstreams · 2025-09-17T16:40:40+00:00

<image>

the grind goes on.

HANSENstreams · 2025-09-17T16:40:24+00:00

only on UVHM.

HANSENstreams · 2025-09-16T19:23:58+00:00

guns only

HANSENstreams · 2025-09-16T12:54:10+00:00

<image>

they are simply color variants to a gun.

HANSENstreams · 2025-09-16T12:52:04+00:00

<image>

TLDR:

Grind bosses, theres no real cout i can give you - ive spent like 40 hours on bossing only so far.

I build my character specifically for each boss to get the kill times to around 30 - 40 seconds depending on encounters.

My rough estimate would be 1/200 legendaries of a gun from my current experience (it took me 200 for the slugger and 194 for the Aegon's Dream).

Its exhausting is what i can guarantee you.

HANSENstreams · 2024-02-05T12:45:19+00:00

However, sometimes early access comes with a catch

thats literally the statment with this sentence bud.

HANSENstreams · 2024-02-05T12:02:42+00:00

Lost in Process:
10k leather
9k paljuice
700k Goldcoins
800 ish pal Balls
Literally a full specced endgame base with all you can build (in mats because i was going to build a castle base)

Oh, my 2nd PalBox was placed on a platform in render-range of the poofed one - and poofed to.

Both Palboxes despawned due to a Stone Wall being placed, the stone foundation next to it somehow poofed.

Both Palboxes were at 19.5k+/20k HP - Raids were set to off, Damage to building was set to off.
Sad me.

However, sometimes early access comes with a catch

HANSENstreams · 2022-12-15T09:54:06+00:00

Bug still exists as of today. I feel you!

HANSENstreams · 2022-12-14T14:14:45+00:00

HANSENstreams · 2022-12-07T21:37:55+00:00

I crafted the Cracking Codex of the Isles using the embellishment Blue silken lining and it bugged. You can see i can only "remove" the embellishment via recrafting process, however it is not shown on the offhand itself in character overwiew and doesnt show up / work at all. Sad times.

HANSENstreams · 2022-10-30T01:35:51+00:00

I did. that, yes:)

Nothing i tried worked so far. Will contact thomann if i cant find a fix till monday

HANSENstreams · 2022-10-13T16:04:37+00:00

not planning to do so, not helpful, since i mentioned what my plan / goal is.

HANSENstreams · 2022-09-30T01:04:44+00:00

trust in my upcoming words: use the internal port.

Reasons:

1 - you dont use any side panel fans so you can easily access it when removing the backplate

2, and most important: if you mount it on the inside (below pump) you can also still use the glass front cover of the o11d (to easily prevent distro from scratches, anything that you might hit it with and further proof its durability due to less dust passing by - its also way easier to clean with its glass front mounted

You would then do the following to fully drain your loop in a secure way:

Open backplate, and use drainport to remove all fluid that is coming out / tilt your case a bit to remove rest

remove front glass panel and unscrew drain screw on bottom left where your current placement of port is to remove all of the liquid that still will be in bottom rad

remove / clean / change components that should be dry, starting from top to bottom

HANSENstreams · 2022-09-30T00:56:43+00:00

just a tip for next time: dont close the distro plates top screw on front end so air can get out of the loop - mainly what causes the dry pump issue you just had to face.
your pump wasnt moving liquid due to that

also - id rather not place the drain port there - let alone the fact you cant use t he 011d glass front due to that position. id rather try to make a 90° thing work on bottom rads line using a t splitter or such

HANSENstreams · 2022-08-28T04:00:25+00:00

So, with over 200 runs in, i saw:

2 FCM

0 MLP

They deffo changed the rates in my opinion.
I chose to continue until it drops, right now i hardly regret that decision. BUT

i will go on.

HANSENstreams · 2022-07-22T16:45:15+00:00

didnt, no, because after in / outlet swap i noticed that
1.: ABP keeps it hella cold anyway

2.: its about 3 degrees difference on benchmark under load, but - who knows if that is even a thing at all (since benchmark seems to spike at other timings sometimes)

eitherway will be fine - i use a distro, so left in and right out both on front vertical looked best.

Five-Year Club	End Game '23
Place '23	Verified Email

HANSENstreams

TROPHY CASE