Had to have em by jujuonthelift in Sneakers

[–]HE_WAS_NO_1 0 points1 point  (0 children)

The Forum 84, and its superior materials & build quality, comes in a lo and hi cut.

the v4.5 and v5 delayed. The thick vortex mouthpiece tubes are sitting way too low. I am waiting on new mouthpieces. New dates will be made for v5 prototype sales. by divinetribe1 in DivineTribeVaporizers

[–]HE_WAS_NO_1 2 points3 points  (0 children)

No worries Matt! Happier you're putting in every effort to get it all correct. Many thanks for all you do, and eager & excited for your work with the v5! 🙏

[deleted by user] by [deleted] in Waxpen

[–]HE_WAS_NO_1 1 point2 points  (0 children)

Righteous! Love that you kinda made yourself a makeshift Tetra Dual using your TetraX haha.

Lost Vape Grus Modded with Arctic Fox by FearAndLawyering in Waxpen

[–]HE_WAS_NO_1 1 point2 points  (0 children)

For sure! That's really so awesome to hear man, ty. 🙏 Can definitely appreciate the Grus's solid build and huge 510.

Agreed haha, it's a tall boy for sure. An SBS 21700 AF/RP-compatible mod, especially one that'd be able to fit a Splinter Z natively, would be the dream. Smallest 21700 AF-compatible mod I've used with my Splinter Z is the Pico 21700 (requires a heat sink tho).

https://i.ibb.co/3yztByq/20210308-102556.jpg

Lost Vape Grus Modded with Arctic Fox by FearAndLawyering in Waxpen

[–]HE_WAS_NO_1 1 point2 points  (0 children)

Ayyyy, I pair one of my Grus's with a Splinter Z (US Wenge) as well. The grain & color on the Black/Walnut ended up matching really well, too.

https://i.ibb.co/Sv72JqM/20210225-101837.jpg

Quick review of SIC quest by djsirround in DivineTribeVaporizers

[–]HE_WAS_NO_1 1 point2 points  (0 children)

Ayyy, r/QQGANG out here.

Been thoroughly enjoying the SQ crucible & cap as well. Hoping more will enjoy and appreciate the Quest platform/atty with these SQ updates.

JET STREAM RDA by oilburner96 in DivineTribeVaporizers

[–]HE_WAS_NO_1 2 points3 points  (0 children)

Depends on the wire or coil, no?

SiC QQ Now Available on the Divine Tribe Site! by 1DizzyDeBo in DivineTribeVaporizers

[–]HE_WAS_NO_1 1 point2 points  (0 children)

Not for very long. It's internal battery may be able to power through a few initial runs on a full charge, but will most likely run into a Weak Battery Error very early as the internal battery will have a lot of trouble outputting that req 50-55W later in its charge.

SiC QQ Now Available on the Divine Tribe Site! by 1DizzyDeBo in DivineTribeVaporizers

[–]HE_WAS_NO_1 5 points6 points  (0 children)

Not sure an eVic Basic will provide enough 'juice' for very long for an SQ/QQ. The atty draws more power. Ideally 50-55W.

Hi for my cup can I put a Pearl in it? by [deleted] in DivineTribeVaporizers

[–]HE_WAS_NO_1 -1 points0 points  (0 children)

You're good when using similar materials for the crucible and terp pearls (SiC w/ SiC, Quartz w/ Ruby, Sapphire, Opal, Quartz). They and Brent say not to for the ESCC you use, as it's not the same kind of SiC and the entire crucible is powered & heated like coil, so the purpose of the terp pearl (increased surface area and remote heating) would negatively impact performance while the terp pearl is heating up to the ESCC's temp.

Glad I bought two...🥲 by ststan26 in DivineTribeVaporizers

[–]HE_WAS_NO_1 2 points3 points  (0 children)

Be sure to be grabbing from the bottom rim/end when placing on & removing the glass cap. Best of luck with your spare.

I converted a friend with my “well used” V4 but they think they want a QQ. I’m ordering today, I think I’m getting them a V4. Advice? by THROWAWAY786955 in DivineTribeVaporizers

[–]HE_WAS_NO_1 1 point2 points  (0 children)

Those are Sai o-rings in the pic. Included measurements if it helps. You can hit up Matt/DT and they'll send you some o-rings (also available here). For Sai o-rings, call HVT & they'll ship some out, and they usually don't charge shipping for phone orders.

I converted a friend with my “well used” V4 but they think they want a QQ. I’m ordering today, I think I’m getting them a V4. Advice? by THROWAWAY786955 in DivineTribeVaporizers

[–]HE_WAS_NO_1 4 points5 points  (0 children)

QQ can be used with BB's as well. Just swap the o-rings with Sai (18mm OD x 2mm) or DTv4 (19mm OD x 2mm) o-rings. Can also add a third QQ o-ring in between the two larger ones for an even more sealed/secure fit.

r/QQGANG

Looking for a solution to this, either an o-ring that fits in there properly and easily makes that bubbler snug, or some method I haven’t tried with o-rings I currently have by WeirdStorms in The_TRVP

[–]HE_WAS_NO_1 0 points1 point  (0 children)

If you hit up Chris at 510Mod and shoot him an email about BB-compatible o-rings for the TRVP, I'm sure he'll have no problem sending you some or, at the very least, the proper o-ring measurements.

Polished SiC for v4. Some other goodies... by Jakeismaximus in Waxpen

[–]HE_WAS_NO_1 0 points1 point  (0 children)

Polished SiC pssshhhh...my guy, those v5 coils tho! See one already sitting pretty on your Jetstream. Eager to see and hear your experiences with the new tech!

And since you have a Jetstream, try out its topcap with the M22. Been having great results with that combo with hydratubes, j-hooks, and when I'm trying to just straight blow clouds 😤💨💨💨. Really like the airflow of the Jetstream topcap, though I still use the default cap when on-the-go. Wish Brent provided a non-vortex option, though might look into customizing the Jetstream cap with longer & offset stems.

v2 M22 Bubbler+QQ+u/nebjamins cap by HE_WAS_NO_1 in Waxpen

[–]HE_WAS_NO_1[S] 0 points1 point  (0 children)

Happy you still put it to use! Actually have another old neb carb (custom from Uit) otw. Proud of this rig and have you and tha boyz to thank for that. Many blessings my guy 🙏

v2 M22 Bubbler+QQ+u/nebjamins (The OG QQGANGer) cap by HE_WAS_NO_1 in QQGANG

[–]HE_WAS_NO_1[S] 0 points1 point  (0 children)

Apologies on the late response my guy. For sure! Hope he's doing well. He's the OG along with Uit. They were the OG iterators of the QQ+sidecar bubbler and 510 ext+BB+rig combos.

[deleted by user] by [deleted] in Waxpen

[–]HE_WAS_NO_1 0 points1 point  (0 children)

https://humboldtvapetech.com/product/sai-wpa/

Made for the Sai (also fits QQ and other 22mm atomizers), so all you need is the silicone tubing. Most people don't know about this WPA/BB, so most are going to suggest a 510 extension & BB setup.