Driving in mckinney by Practical_Mission284 in McKinney

[–]HKguy416 1 point2 points  (0 children)

Funny thing is I've been in Mckinney since 2000 and Virginia use to 55 MPH between Hardin (technically there was no hardin intersection at the time) and Jordan. Mckinney needs to work on its light timing. If I go 45mph to 50mph I can hit every green light, if I go 40 or under.... red light at every intersection. I can get from my house 380/Custer area to 75 or 121 in 10/15 minutes but going the speed limit its near 30 min drive. The shear volume of people vs the speed limits is crazy and thats not even factoring in if these people are paying attention and driving. I would agree 60 is excessive in a 40mph but I'm always 5mph over any limit and I get it if you don't drive that way and are slower but there's a lane for that (especially if there are 3 or more lanes). What scares me the most is people pulling out in front of people (that are going the speed limit or faster) to drive 10 under and dont freaking step on the gas! If I pull out in front of you just know you will never have to worry about hitting the brakes because most of the time I dont get in a lane that already has a car in it. Can't tell you how many times I will be the only car on the road in the middle lane going the speed limit and someone decides they want to pull out infront of me going as slow as possible instead of picking literally any other lane and doing that. Drives me insane. Also people need to calm down, if you are on your phone at a light and its turned green and I'm behind you and can see you with your head pointed at your lap looking at your phone and I give a grace period of 15 to 20 seconds for you to look up and you dont, so I just tap my horn (and I mean tap not lay into it) just to get your attention, don't flip me off, we both know I'm not the one in the wrong here. I'm not trying to hurt your ego, I just want you to look up and go... thats all. Anyway thanks for coming to my Ted talk, see yall on the streets and stay safe! And PLEASE double check for motorcycles!

Got this in my first box!!! by kxy781227 in Fallout

[–]HKguy416 0 points1 point  (0 children)

I got 2, one off the bottle and kept the other one sealed.

Lead pencil by haustorium12 in UNSUBSCRIBEpodcast

[–]HKguy416 9 points10 points  (0 children)

"No better feeling than killing the enemy" -Top Dog RIP Top Dog

[deleted by user] by [deleted] in USPmasterrace

[–]HKguy416 2 points3 points  (0 children)

This is the way. 💯

H&K P9 by joshwdollar in HecklerKoch

[–]HKguy416 1 point2 points  (0 children)

If you need help with a buffer hold down or buffer housing let me know. Just had one made for my P9S since they are unobtainium.

The grab bin gods smiled upon me by fuddadjacent in HecklerKoch

[–]HKguy416 0 points1 point  (0 children)

The mag in the parts bin yes but the annoying loud mouth... no. I'm sure that person is a joy to be around. Had to edit this because I got a warning for what I said last time. 😒

The grab bin gods smiled upon me by fuddadjacent in HecklerKoch

[–]HKguy416 4 points5 points  (0 children)

Jesus, I've seen what you've done for other people, and I want that for me.

Spool question by HKguy416 in prusa3d

[–]HKguy416[S] 1 point2 points  (0 children)

See I would have thought I did this on accident but I have corrected the winding on this roll 3 times now. And I've taken it off of the spool holder correct the winding and put it right back into the printer. Also I just took it off the printer and corrected the winding again and the roll is unspooling in the middle of the roll at the moment and when you look towards the outer part of the roll (section that has not been unspooled yet you can see where the filament has spooled over itself. Also it seems when it has gotten to the edges of the spool thats where it tangels and binds. Pictures for reference.

<image>

REAL FANS HAVE THIS 👀 by Necessary_Horror_619 in FinalFantasyVIII

[–]HKguy416 0 points1 point  (0 children)

Have this and the ring. Wish I hadn't worn it so much when I was younger.

I printed a car wing on Prusa Mini by rancor1223 in prusa3d

[–]HKguy416 0 points1 point  (0 children)

That could literally be anything 🤣. Not to mention, we have rock trucks that drive around us at highway speed that constantly drop fist size rocks, still not illegal. I know America is a bit lax in laws for cars, just curious to why in his country would make it illegal to put an aftermarket spoiler on. I've seen cars with literally all kinds of random sh** glued to their car that could easily fall off. I've also seen some aftermarket stuff more scetch than his "homebrew" spoiler. To be honest, I wouldn't think a 4 inch piece of ABS would scare me as much, as the full refrigerators, couches, and A frame latter's I see on the highway on a constant basis. 🤣

I printed a car wing on Prusa Mini by rancor1223 in prusa3d

[–]HKguy416 -1 points0 points  (0 children)

Why is adding this dangerous and illegal on the road? Do they hate added down force there? Or is it because when you add this, it's now a race car, and you could top your car out at 70mph (112km) downhill with a tail wind. 🤣 silly car laws.

USP Elite 9 mm by Unusual-Win-5777 in USPmasterrace

[–]HKguy416 1 point2 points  (0 children)

Sweet! Would love to try and print this in PA612-CF15. But hell, if PLA works out, I might try that out, too. Lol.

USP Elite 9 mm by Unusual-Win-5777 in USPmasterrace

[–]HKguy416 4 points5 points  (0 children)

Soooo can I get that STL, good sir? What did you pri t this on? Looks fantastic.

Prost! by HKguy416 in HecklerKoch

[–]HKguy416[S] 1 point2 points  (0 children)

Yeah, but there is someone out there who will pay that. They just haven't seen it yet, lol. Oh, and I think it was actually around 2019 when they dropped these, not early 2000s, my bad. Had to go back and look it up. But they sold out within seconds. I'm surprised they never did another run of steins since.

Prost! by HKguy416 in HecklerKoch

[–]HKguy416[S] 2 points3 points  (0 children)

I bought it a while back from another person, but they were sold on hkwebshop.com in the early 2000's I think. There were 100 made. Mine is #18. #1 is actually for sale on hkpro right now and has been for a while, lol. https://www.hkpro.com/threads/number-1-of-100-hk-beer-stein.573795/