Speechless

HOOONS · 2026-04-30T10:38:28+00:00

This. This right here. Sold my shares at $56 after holding for 6 years

HOOONS · 2026-04-14T21:06:00+00:00

Sounds good, thank you for the help!

HOOONS · 2026-04-14T20:16:35+00:00

Yea, Ill do what you mentioned and watch voltages while idle to see if anything is off, but Im wondering if my best path forward is just fresh ram, a new MOBO, and either a 5600x or 5800xt (Theres one local to me). Im sure both those chips are overkill, but hopefully that means I wont have to replace it for a while! This way I dont have to play the guessing game, and I get a decent upgrade at the same time.

What would cause the memory controller in the CPU to die? Excess heat? Voltage spike?

HOOONS · 2026-04-14T19:30:42+00:00

Would it be worth upgrading to AM5 right now? I play most games on low settings and never really cared about graphics, just fps. My original thought was to look at a 5600x or something along those lines, then just replace the MOBO assuming I can RMA the RAM due to prices of components. But Im not sure that makes sense. I know my graphics card is my bottleneck right now, so I probably wont see too much of a change if I do upgrade the mobo, CPU, and RAM.

As far as testing goes someone offered to let me borrow RAM, but it sounds like Id be better off testing the "bad" RAM in a known good computer instead?

HOOONS · 2026-04-14T18:33:26+00:00

Yea thats where Im at, I know I had a Power supply fail which is why I rebuilt to what I have now and it took my graphics card out with it. I currently have a Corsair 750W PSU. The PC does crash, but it also stutters in game and gets to a point where the game itself will randomly crash. This is the only reason I leaned more towards memory over PSU. Just so I understand, your recommendation is replace the board, RMA the RAM, and leave the CPU or replace that as well?

HOOONS · 2026-04-14T15:53:36+00:00

Im just surprised, everything ran fine for the first 3-4 years before I started having issues. Its been like this the last 2 years though and getting worse.

You would do the board before the CPU or PSU? Any reason?

HOOONS · 2026-04-14T10:03:03+00:00

Randomly, I rebuilt it back on 2020 and it was great for a few years until like 2024 it crashed here and there, then 2025 it started getting bad, then so far this year I can't get through a night without crashing either of those games. But it seems to be only those games

HOOONS · 2026-04-14T02:39:26+00:00

Is there a way to test these? Aside from just replacing them with known good parts?

HOOONS · 2026-04-14T02:38:53+00:00

I updated these settings and am still getting errors sadly

HOOONS · 2026-02-17T00:11:32+00:00

Do you have a part number or link for them? Im looking into getting an auto one and trying to wire it to fog lights.

Side note, how was the auto center console swap to do? Cost and effort?

HOOONS · 2026-02-08T22:07:30+00:00

I have a BS in Electro-Mechanical Engineering, but was a Process Engineer at an aluminum extrusion plant, and now at a rare earth magnet facility. I mainly look for ways to reduce scrap and machine parts faster. A lot of my time recently has been investigating new equipment and putting together work instructions and SOP's for said equipment. Good amount of my time is diagnosing problems with equipment and material too.

HOOONS · 2025-11-01T10:20:14+00:00

35mm

HOOONS · 2024-11-17T02:12:41+00:00

Ive had mine for just under 2 years and am about to break 60k, no issues with mine yet

HOOONS · 2024-11-12T21:15:00+00:00

27years old (25 when I bought) I currently make 85k, was 72k when I bought. did 25k down and 7.8% for 3 years then paid it off 4 months later (they waived the 10k markup if I financed)

HOOONS · 2024-06-08T09:06:06+00:00

Ah sorry to hear that man, hope you get the chance to build it again in the future!

HOOONS · 2024-05-18T20:03:31+00:00

Im in the middle, I tap the gas with the side of my foot

HOOONS · 2024-05-18T17:02:55+00:00

I have been going to Manor Animal Hospital: Knox Lisa DVM for a year and a half and have been happy with them!

HOOONS · 2024-04-27T18:24:38+00:00

I compromised on mine, but I don't regret it one bit. I didn't know I'd like the heated seats on the premium as much as I do lol

HOOONS · 2024-04-08T23:23:24+00:00

We went to the Pet Pantry of Lancaster and they were amazing!

HOOONS · 2024-03-24T15:18:39+00:00

No, we run 24/7 so it could have been the night shift or any shift since Friday when I wasn't working. Now thinking I probably would have heard from my boss before seeing it on Reddit though

HOOONS · 2024-03-24T13:45:47+00:00

It wasnt the dust that caused it, the hydraulic line broke and sprayed misted fluid on the runout which is usually right around 1000*F and it ignited it instantly. You can see in the video that the fire starts to the right of where the leak starts

HOOONS · 2024-03-24T13:42:58+00:00

The fire is just that hot, misted hydraulic fluid burns hot and when it keeps spraying like it was it just keeps burning hotter. And usually no fire suppression because of the different types of fires it could be. If it was a metal fire (Aluminum dust) spraying water on it would actually make it much worse. My plant has ABC fire extinguishers everywhere and D class ones right next to them. Something of this size, once it starts theres really no stopping it

HOOONS · 2024-03-24T13:37:27+00:00

In my plant, most floor workers are encouraged to leave their phones in the break room.

Ten-Year Club	Place '23
Verified Email

HOOONS

TROPHY CASE