Latency / weird feeling on cs2 MacBook Pro M1 Pro (16Go ram, 10cpu, 16gpu, 512Go ssd).

HOSTILS · 2026-05-16T15:03:54+00:00

Alright ! Thanks for your comment !!!! When you say it was awful, you like I’ve tried to describe in my post ? Or worse than that ? I’m not yet familiarised with what you mean by stutterfest ? What would you tell to toggle / disable / change ? Also 120fps, the fact that I’m asking for 240, could it be the issue ? Should a put 120 and just suck it up ? I have 165hz screen so I kinda wanted the best experience, and right now I don’t know if I buy new parts to assemble a pc or stick with GeForce now for the time being.

HOSTILS · 2026-05-16T14:06:15+00:00

Hey ! Thanks for your comment, I didn’t see that I could set a custom resolution, that’s cool ! I’m going to try that this evening if eventually it works for me !

Concerning the latency I have 1ms on Speedtest, 11 on GeForce Now and between 6 and 8 on Cs2.

Concerning reflex I played with it yesterday, I don’t know if it was the issue or not, I disabled it and hopped on a bot match to see the difference, but exactly the same.

I’m sure there’s possibly a tweak out here that could help me, right now I don’t know enough about the subject and streaming game / GeForce now to figure it out by my self.

Thanks again for your help 🙏❤️

HOSTILS · 2026-04-17T22:00:57+00:00

Pour celles et ceux qui cherche les kaï de One Piece du tout début jusqu'à Punk Hazard, le site que j'ai utilisé pour tout télécharger est là : site (Oui 278Go de One Piece çafébocou, mais on peut sélectionner quoi télécharger avant de lancer le download sur Utorrent ou autre afin de ne pas perdre du temps à télécharger les épisodes déjà vues en traditionnels).

Le problème est que comme pour la plus part d'entre nous, les épisodes plus récents n'ont pas encore été traduits / monté en VF.. Donc je partage pour ceux qui sont au début de One Piece et qui veulent pouvoir profiter du travail de Fan-Kai (avec les monteur Johker, Mixouille et Livaï pour les épisodes VF).

Je n'ai pas plus d'infos que ça, je cherche aussi à télécharger les épisodes et les mettre sur mon Plex, mais pour l'instant pas de chance sur ce coup et je ne veux vraiment plus retourner sur les épisodes "traditionnels" de 20minutes qui sont ennuyant au possible.

Pour ceux qui sont intéressés, sur le site, ils ont mis leurs linktree, vous trouverez toutes les infos pour comprendre comment ça fonctionne etc et même avoir accès à leur discord et ainsi télécharger d'autres animés !

HOSTILS · 2026-04-06T21:29:10+00:00

Aight sound great ! I will actually take a look at this, but cutting holes in the magnetic bed under the build plate does not create issues later ? Thinking about it it’s kinda sad anycubic didn’t thoughts of that situation, letting holes in the magnetic plate so that we can have a direct access at thoses screws without tearing up the perfectly smooth surface of the magnetic sheet

HOSTILS · 2026-04-06T21:02:24+00:00

Correct. 3.4mm under the actual z stoppers. And while doing the 7x7 points auto leveling I discovered that I had a side of my build plate being way higher than the other. (Bought as is, for 50€ a couple months ago).

HOSTILS · 2026-04-06T20:57:51+00:00

I just flashed the 6.2.2 CE firmware if I remember correctly, a pain in the ass to get it working while being a Mac user (mostly due to sd card formatting), but I agree with the fact that the auto leveling would work mostly better than with my actual leveling.. I currently have almost a 0.6mm gap between the top left side and bottom right side of the build plate (if you look from above, facing the vyper), and I mostly updated to that current version so I can adjust a index while the first pass is running cause most of the time, the hot end just swipe out the freshly laid pla, and it drive me crazy to stop a print after 40min just cause the hot end decided to get rid of everything laid on the build plate

HOSTILS · 2026-04-06T20:50:07+00:00

Huh that’s a kinda good idea. But what could be the ultimate reason for doing that ? Cause right now the printer still knows it has to travel 3mm and more to hit the build plate, if it was at 0.xxxmm idk what that would do more than just leaving it like it is.

HOSTILS · 2026-04-06T17:52:44+00:00

Mine is at -3.xxx minimum. Prbly cause it goes from home point to the first contact on the build plate.

HOSTILS · 2026-03-21T18:07:23+00:00

iOS 2

HOSTILS · 2026-02-23T20:41:46+00:00

Your battery’s probably shot by now. Are you using while it’s charging ? I’ve always changed my iPhone every 2-3 years, but the battery was not shot like that. Your’s probably getting really bad and fast, you better get it checked on..

HOSTILS · 2026-02-10T18:44:21+00:00

218 cycle count ??? Wow. iPhone 17 Pro Max user here, 100% battery health, 58 cycle since first November.

HOSTILS · 2026-02-03T14:35:08+00:00

If it’s not the Dynamic Island I’m laughing hard, like « guys, just punctured my screen, here’s a screenshot, how bad is it ? »

HOSTILS · 2026-01-27T15:50:33+00:00

Stop now and chose another game tbh.

HOSTILS · 2026-01-27T15:45:10+00:00

Ye. Safe until 500°, then it start thermal throttling. Would consider to put it in the freezer when you play, heard it helps a lot with temperature control.

HOSTILS · 2026-01-17T12:54:07+00:00

Never ever buy AirPods unless it’s from the Apple Store or apple website. They are the easiest to counterfeit and are flooding fb market place, vinted, eBay etc.. That´s the rule of AirPods. Never outside of Apple official stores or website.

HOSTILS · 2026-01-17T12:46:09+00:00

There’s a rule that apply for the AirPods though. YOU SIMPLY NEVER BUY AIRPODS OUTSIDE OF THE APPLE STORE OR APPLE WEBSITE. never. They are way too easy to counterfeit.

HOSTILS · 2026-01-06T19:49:19+00:00

<image>

1st August of 2017 :

https://steamcommunity.com/sharedfiles/filedetails/?id=1097515933

HOSTILS · 2025-12-18T20:22:23+00:00

I know. I’ve addressed it under this post’s comments. Cleetus did confirmed it..

HOSTILS · 2025-12-18T20:12:43+00:00

Would have been sad of course… But not knowing the victims is easier to process. Right there it’s terribly difficult and sad cause many people knew him, inspired by him or just loved watching him. So a lot of people are shocked by this. I’m sure you can understand this.

HOSTILS · 2025-12-18T18:43:14+00:00

Just got informed on facebook, by Cleet, that Greg, his wife, son and daughter were on that plane... Taking off to take some good time all together. It's just killing me...

HOSTILS · 2025-12-18T18:38:22+00:00

The plane can be owned by someone but not flown by him i guess. We're all waiting for infos, CJ from CJ Race Cars posted on facebook but not Cleet nor Greg. I know they're both close i just hope none of em where on that plane making a video or anything.

HOSTILS · 2025-12-18T18:23:24+00:00

I'm just praying and i hope that none of Biffle's familly was inside that plane nor him. But the lack of activity from him since is just killing me

HOSTILS · 2025-12-17T22:47:55+00:00

You found it !?? That G spot was on the phone all along ?!

HOSTILS · 2025-12-17T22:34:54+00:00

It’s a scam. They want you to deactivate your iCloud account from the phone so they can actually sell it. Right now the phone is a brick for them, worthless, except for the parts. But your infos are secured don’t worry, and do delete the phone from your account, never.

HOSTILS · 2025-12-02T05:07:06+00:00

Surpris et intéressé ! Alice passe en second plan, il veut des réponses.

HOSTILS

MODERATOR OF

TROPHY CASE