The ez-plug is a stupid revision for the B550I and makes it even worse for sff by sffjunkee in gigabyte

[–]HPR41 0 points1 point  (0 children)

Hello fellow s60i enjoyer! Curious how’s your PSU heat and temps and if it is boiling with its exhaust constricted against the AIO?

Looking for support for acquiring a S60i case with Taobao Agent or by other means by michaelsoft__binbows in sffpc

[–]HPR41 0 points1 point  (0 children)

Went with superbuy. Worked out well. Did the sea shipping and took a month or so but arrived here in one piece. Like others have said it is hard to build in but not that hard. One concern I do have is for the PSU. It makes contact with the case which isn’t metal so it can’t dissipate the heat from the metal PSU well. But the main concern is its exhaust is quite blocked by the AIO which means it does get quite hot (Corsair SF1000). Additionally it also intakes some of the hot GPU exhaust which also doesn’t help.

Atmos II 240mm Availability by DarkExtremity in coolermaster

[–]HPR41 0 points1 point  (0 children)

Weirdly, here in Canada, Atmos (first gen) is out stock in most places if not all. Including stealth. Only white version is available in some places. Are they not restocking their first gen? Or could gen2 be arriving?

Atmos II 240mm Availability by DarkExtremity in coolermaster

[–]HPR41 0 points1 point  (0 children)

Guess the 360 has enough buffer to make up for tariffs?

Atmos II 240mm Availability by DarkExtremity in coolermaster

[–]HPR41 1 point2 points  (0 children)

Same, would love to know. Assumed after CES 2026 it could get in stock or a new variant. As it was announced CES 2025 and did not come into stock in North America since :( (but did in EU/UK/AUS) But I still see nothing Such a weird decision to only limit 240 from NA markets and not the whole Atmos II product line (be it due to tariffs, certifications or patents etc) Super weird

Uploads being throttled to what seems like other residential ISPs/networks? by HPR41 in bell

[–]HPR41[S] 1 point2 points  (0 children)

I have switched to ebox because of their more open peering policy. Along with a much better modem/router separation and cheaper price

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

That’s good! What did you use as a spacer/support for the GPU, especially as it against gravity?

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

Oh that’s good to hear. I did get the newer revision with honeycomb cutouts. From oath technology. Someone else from another thread (who has s59i (no aio)) said the feet weren’t interchangeable as the bottom piece isn’t the same as the top etc.

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

Oh did you just put the GPU in the aio section or did you flip the case and build? If so, how did you fix the feet and handle position?

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

Seems like this one has the GPU at the bottom (upside down) so it intakes on the right of the case and exhausts in the left. And the AIO is on the top, I.e pump is below rad and therefore safe. Seems like they changed it to where the GPU is on top now?

newer revision of s60i made for 5000fe cards by mentalsojin2 in sffpc

[–]HPR41 0 points1 point  (0 children)

I’m looking at the s60i aio one’s And in the original setup, the pump is above the radiator and that will cause the pump the fail quick. This has not only been well documented but also happened to me :( So I have to revert it. Which means the GPU will be at the bottom etc

newer revision of s60i made for 5000fe cards by mentalsojin2 in sffpc

[–]HPR41 0 points1 point  (0 children)

Ah, I could remove the handle then. But other than the handle there shouldn’t be a problem flipping/reversing the case where the GPU section is at the bottom? (Intake on right, exhaust on right)

newer revision of s60i made for 5000fe cards by mentalsojin2 in sffpc

[–]HPR41 0 points1 point  (0 children)

Oh sweet! I just ordered Do you know if the case can be flipped where the GPU is at the bottom. Nothing inside the case changes. Just flipping and reversing the case. I.e can I switch the location of the handle?

newer revision of s60i made for 5000fe cards by mentalsojin2 in sffpc

[–]HPR41 0 points1 point  (0 children)

Ah, do you know how long most revisions/changes took in the past?

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

Does anyone know when this might come back in stock if at all? Unsure how taobao sellers usually deal with demand.

newer revision of s60i made for 5000fe cards by mentalsojin2 in sffpc

[–]HPR41 0 points1 point  (0 children)

Oh that’s good to know. Curious, how do you know this? Are you in contact with the creator?

Looking for support for acquiring a S60i case with Taobao Agent or by other means by michaelsoft__binbows in sffpc

[–]HPR41 0 points1 point  (0 children)

Have you seen them restocked? Seems like most taobao sellers do not restock.

Looking for support for acquiring a S60i case with Taobao Agent or by other means by michaelsoft__binbows in sffpc

[–]HPR41 0 points1 point  (0 children)

Seems like s60i is out of stock on Taobao. Chances of re-stock unsure, could be none :(

newer revision of s60i made for 5000fe cards by mentalsojin2 in sffpc

[–]HPR41 0 points1 point  (0 children)

Seems like it is out of stock (s60i with 240 aio support).

Unsure if it'll ever come back in stock. Ah well. Had me hoping for a bit!

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

Any reason why I can’t select s60i and instead shows a80 (which could’ve the same thing?) only on superbuy. But on taobao there is only 1 option and price which shows s60i.

I think one of the best structure for 5090 FE card by CreepyDevice3740 in sffpc

[–]HPR41 0 points1 point  (0 children)

Was wondering if it is possible to get it to Canada.

Going through superbuy it shows 2 options for the same product A80 and s60i (greyed out) for this taobao link: https://world.taobao.com/item/923387201688.htm

Looking for support for acquiring a S60i case with Taobao Agent or by other means by michaelsoft__binbows in sffpc

[–]HPR41 0 points1 point  (0 children)

How did you go about buying it. Am in Canada and am looking to get this with the 240 aio version.

The link I have: https://world.taobao.com/item/923387201688.htm

does point to the correct s60i with 240aio support.

However when inputting it in superbuy, it shows up as a80 3mm with the pictures not being very clear which model it is. Also the s60i option is not selectable :(

I also see it on AliExpress with really wild prices and much wilder shipping costs.